Skip to content

Releases

ORC 1.7.0

Choose a tag to compare

@acklin83 acklin83 released this 16 Nov 09:32

Media keys: play, skip and the system volume from the UF1 and UF8 while REAPER is closed.

  • Six Media actions: play/pause, next track, previous track, system volume up, system volume down and system mute. The player that plays at the time gets them (Music, Spotify, a browser). Any key in ORC's window can have one.
  • Out of the box: PLAY, FFW and RWD are play/pause, next track and previous track. Keys you set yourself stay as they are. When REAPER starts and Rea-Sixty takes the surface, the transport keys are REAPER's again.
  • Jog wheel on the system volume: System volume in the jog wheel's menu, 1 % per step. The UF8's CHANNEL encoder follows. On the Mac an RME interface under TotalMix has no system volume: there the jog wheel goes on the TotalMix output the computer plays through.
  • Mac: the first media key asks for Accessibility. Allow ORC in System Settings, Privacy & Security, Accessibility.
  • Fix: a transport key on Sleep or brightness stayed dark. It now lights in its colour.

ORC for Windows is not code-signed: SmartScreen asks once per version (More info, Run anyway), and Smart App Control refuses ORC until it is switched off under Windows Security, App & browser control.

Downloads:

  • ORC-1.7.0-Setup.exe: the Windows installer. Windows 11, or Windows 10 version 1903 or later, 64-bit.
  • ORC-1.7.0.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.6.4

Choose a tag to compare

@acklin83 acklin83 released this 09 Nov 10:47

MoreMe: duplicate a performer, one performer per output, names for a group's channels.

  • Duplicate performer: next to Delete performer on the MoreMe page. The copy has the same faders and settings, a link of its own and the next free headphone output. The mix in TotalMix is not copied.
  • One performer per output: an output another performer has is greyed out in the menu, with that performer's name. Where an older file gave two performers the same output, the first one keeps it.
  • Groups on the MoreMe page: each group is one line with its colour, name and number of channels, and opens on a click. An open group lists its channels, each with Remove. Delete group is below the list and asks first.
  • Names for a group's channels: an open group has a name field per channel. The name shows on every phone that has the group, on Phones 1 to 4 too. An empty field keeps the TotalMix name, and a performer's own fader name still comes first.
  • Fix: a fader moved shortly after connecting, a layout load or a refresh could jump back to its previous value.

ORC for Windows is not code-signed: SmartScreen asks once per version (More info, Run anyway), and Smart App Control refuses ORC until it is switched off under Windows Security, App & browser control.

Downloads:

  • ORC-1.6.4-Setup.exe: the Windows installer. Windows 11, or Windows 10 version 1903 or later, 64-bit.
  • ORC-1.6.4.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.6.3

Choose a tag to compare

@acklin83 acklin83 released this 05 Nov 09:20

More for the UF8 on stage: PAN, 48V and a SEL that follows the submix.

  • SEL follows the submix: a SEND/PLUG-IN key, a key of a submix bank and the nav cross now move the SEL on the output row as well. On the output row the UF1's fader goes along with nav left and right.
  • Link A/B: with Link A/B on in TotalMix, Main and Main B light together on SEL, SEND/PLUG-IN and submix banks. Inputs and playbacks still write to the one submix you picked.
  • PAN on the UF8: the V-Pots of inputs with a preamp turn the pan in the current submix. Press PAN again for the gain. Lit while on.
  • V-Pot push on gain is now 48V: on and off where the channel has it, nothing elsewhere. It used to set 0 dB. The line under the fader reads Gain 48V while it is on. A push on pan still centres.
  • Row actions: four new actions put the input, playback, output or FX row on the surfaces, for QUICK 1-3, NAV, NUDGE, FOCUS, NORM, REC, AUTO and the soft keys. The lamp shows which row is up.
  • Layouts: a layout bank has six keys now, as TotalMix has six layouts. A layout loaded from a surface takes its hidden channels off the surfaces sooner.
  • 360: lit while the settings window is open, dim otherwise, on the UF8 and the UF1.
  • MoreMe on vertical faders: a closed group hides its channels, mute no longer moves the thin strips, and the triangle that opens a group is easier to see.
  • MoreMe settings: my faders now sit below the settings and Save.

ORC for Windows is not code-signed: SmartScreen asks once per version (More info, Run anyway), and Smart App Control refuses ORC until it is switched off under Windows Security, App & browser control.

Downloads:

  • ORC-1.6.3-Setup.exe: the Windows installer. Windows 11, or Windows 10 version 1903 or later, 64-bit.
  • ORC-1.6.3.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.6.2

Choose a tag to compare

@acklin83 acklin83 released this 04 Nov 17:51

MoreMe gets channel groups.

  • Channel groups: put channels on one fader, say all the drums. All of them move by the same dB, and M and S work on all of them. The arrow opens the group: its channels appear below, thinner, each with its own fader, for changes within the group. Set them up on the settings page MoreMe. Groups are saved with the snapshot.
  • The master takes the colour of the mix: the performer's, or the output's on Phones 1 to 4. The settings page shows the same colour as the phones for a performer without one.
  • Fixed: typing a fader's name on the performer page lost letters.
  • The menu item that opens the performers now reads MoreMe.

ORC for Windows is not code-signed: SmartScreen asks once per version (More info, Run anyway), and Smart App Control refuses ORC until it is switched off under Windows Security, App & browser control.

Downloads:

  • ORC-1.6.2-Setup.exe: the Windows installer. Windows 11, or Windows 10 version 1903 or later, 64-bit.
  • ORC-1.6.2.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.6.1

Choose a tag to compare

@acklin83 acklin83 released this 04 Nov 14:35

ORC now runs on Windows.

  • Windows 11, or Windows 10 version 1903 or later, 64-bit: the same surfaces, TotalMix and MoreMe, with an icon in the taskbar's notification area. Windows in the manual has the USB driver, the firewall and what Windows may say.
  • Windows warns on install: ORC for Windows is not code-signed. SmartScreen asks once per version (More info, Run anyway). Smart App Control refuses ORC until it is switched off under Windows Security, App & browser control.
  • MoreMe with every channel in the TotalMix layout: the phones showed no channels. They do now, on Windows and on the Mac.

With Rea-Sixty on Windows, use v0.9.1 or later: older versions do not ask ORC for the surfaces there.

Downloads:

  • ORC-1.6.1-Setup.exe: the Windows installer.
  • ORC-1.6.1.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.6.0

Choose a tag to compare

@acklin83 acklin83 released this 03 Nov 17:13

The settings window is new, and MoreMe gets performers.

  • Settings: a new window, one page per subject in a bar on the left, with Studio Control as one of them.
  • UF8: each of the eight SEND/PLUG-IN keys picks an output as the submix, any output or control-room role. A key whose output is hidden in TotalMix is dark and does nothing.
  • Soft-key bank TotalMix submixes: eight outputs of your choice, with their names from TotalMix.
  • Cue: SOLO on an output is its Cue, on the UF8 and the UF1. FINE and a submix key cues that output, the submix stays, and the key turns yellow.
  • RME: Link Main B to Main: a new action, a toggle.
  • UF8 and UF1 each show their own soft-key bank.
  • UF8 meters: a stereo channel shows left and right apart.
  • A channel hidden in TotalMix leaves the surfaces a few seconds later.

MoreMe:

  • Performers: each musician gets a link of their own with a QR code, their output, their faders from the TotalMix layout or an own list, and what they may change. Without performers the phones pick Phones 1 to 4 as before.
  • Studio Control sets it up, in ORC's settings window on this Mac. Snapshots save a whole set of performers.
  • EQ, dynamics, Auto Level and FX send on the phone, off until you open them. On a performer's own output they change only those headphones. On a channel they change it for everyone hearing it, and the recording.
  • On the phone: horizontal or vertical faders, a layout for a phone on its side, a dB scale, light or dark, a double tap to reset a fader or pan, the master pinned out of the box, hide and sort faders where allowed.
  • The own names for Phones 1 to 4 are gone: those mixes now show their TotalMix names.

With Rea-Sixty, use v0.9.0 or later: older versions ignore the key assignments and the submix bank.

Downloads:

  • ORC-1.6.0.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.5.1

Choose a tag to compare

@acklin83 acklin83 released this 31 Oct 00:42

MoreMe: level meters.

  • Each source shows its level at its fader, and the master shows the headphone output, the level that reaches the headphones. A stereo channel has two bars.
  • Two kinds, picked on each phone in the page's settings: Bars under the fader, or In the fader, where the level lights the fader's track in the channel's colour, strong up to the fader and pale beyond it, red near 0 dB. Off sends that phone no levels at all.
  • The meters need Send Peak Level on MoreMe's remote in TotalMix (Options, Settings, OSC).

Downloads:

  • ORC-1.5.1.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.5.0

Choose a tag to compare

@acklin83 acklin83 released this 30 Oct 12:17

MoreMe: headphone mixes on phones. Off out of the box, switched on in the settings window, page MoreMe.

  • Every musician opens a web page on a phone or tablet, picks a headphone mix (Phones 1 to 4 in TotalMix) and sets level, pan, mute and solo of each source in it, plus the mix's master level and mute. Channel names and colours come from TotalMix. Nothing is installed on the phones.
  • A mix in use on one phone is marked taken on the others, and can be taken over.
  • MoreMe uses a second TotalMix remote of its own (ports 7003 and 7004 out of the box). It keeps running while REAPER has the surfaces, so the headphone mixes stay on the phones during a recording.
  • A PIN as soon as MoreMe is on. Address, PIN and a QR code are in the menu bar.
  • The page speaks German, English, French, Italian and Rumantsch, following the phone, or picked in the page's settings. Klingon too, picked by hand.
  • Studio name, logo, and your own names for Phones 1 to 4 on the page.
  • Reachable from outside the studio behind a reverse proxy with HTTPS; the manual has the steps.

Also new

  • V-Pot speed on the pages UF1 and UF8, 0.10 to 2.00, one per surface. The jog wheel and the UF8's CHANNEL encoder keep their own step.
  • Use the UF1, Use the UF8: each surface can be switched off on its page. ORC then leaves it alone, free for SSL 360° or another program; the menu bar says off.
  • Fixed: after linking two channels to a stereo pair in TotalMix, the surfaces still showed both. The right half now goes, and after unlinking it shows its level again.

With Rea-Sixty 0.8.0 as before.

Downloads:

  • ORC-1.5.0.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.3.0

Choose a tag to compare

@acklin83 acklin83 released this 29 Oct 16:38

The UF8. ORC drives an SSL UF8 next to the UF1, or on its own.

  • TotalMix on the UF8: eight channels of the row on its strips, with faders, V-Pots (gain, pan, width), SOLO, CUT and SEL. With a UF1 both work on one selection. BANK eight channels on, PAGE one, the nav cross picks row, submix and the TotalMix window, as on the UF1. BANK and PAGE light where they lead somewhere.
  • The submix on SEND/PLUG-IN 1-6, in the order of TotalMix' control room, and in the colour bar: > Phones 2, OUTPUT, FX.
  • Channel view: PLUG-IN or a push on the CHANNEL encoder puts the selected channel's STRIP pages on the V-Pots, picked on the soft-keys and stepped with PAGE. On the FX row Reverb and Echo use all eight V-Pots, and soft-key 8 switches the effect.
  • Soft-keys: V-POT and 1-5 pick soft-key banks 1 to 6, the UF1's bank too; the eight soft-keys show both halves of a bank.
  • Main on the CHANNEL encoder in every mode; Show Main volume on change puts it on strip 8 for two seconds while it turns.
  • Hue on LAYER 2, DynaMount on LAYER 3: lamps and stands on the strips, the eight scenes or presets on the soft-keys. DynaMount presets store where every stand is, by name.
  • OBS scenes as a soft-key bank kind, on the UF1 and the UF8.
  • QUICK 1-3, NORM/REC/AUTO, NAV/NUDGE/FOCUS take any action, with lamp colours. Sleep is on QUICK 1 out of the box.
  • Brightness: six actions, LEDs, displays or both, one step at a time, for both surfaces.
  • Settings in pages per surface: General, UF1, UF8, Soft Keys, Colours, UF8 Modes. Import from REAPER brings over Rea-Sixty's Hue, DynaMount and OBS settings.
  • With REAPER: Rea-Sixty 0.8.0 waits until ORC has let go of the UF1 and the UF8 before it opens them. The DynaMount stands' positions go with them, and Hue, DynaMount and OBS settings stay in step at every handover, the newer change winning. With an older Rea-Sixty the UF8 may stay dark while REAPER runs; the menu then says to update it.
  • The menu shows the UF8 with its serial number.
  • Fixed: Hue scenes with the same name in several rooms picked the wrong one; the DynaMount colour menu had one colour.

Downloads:

  • ORC-1.3.0.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.

ORC 1.2.3

Choose a tag to compare

@acklin83 acklin83 released this 16 Oct 17:37
  • Open at login only from Applications. macOS starts the copy of ORC that ticked the box. Ticked in a copy outside Applications, macOS kept starting that copy at every login, even after a newer ORC was installed. The box is now only available in ORC in Applications (or in Applications in your home folder).

Downloads:

  • ORC-1.2.3.dmg: open it and drag ORC to Applications. macOS 13 or later, Apple silicon or Intel. Signed and notarised.
  • libusb-1.0.30.tar.bz2: the source code of the libusb inside ORC (LGPL 2.1).
  • THIRD-PARTY-NOTICES.txt: the licences of what ORC ships.

Setup and every key: manual.