Repository navigation
AdeeboMeter 1.1.1
AdeeboMeter 1.1.1
Is it me or the network? One glance tells you.
No cloud. No telemetry. Never listens.
Download
| File | For | |
|---|---|---|
| ⭐ | AdeeboMeter-1.1.1-win64.zip (0.7 MB) | Everyone — the app, a READ ME and the Theory of Everything PDF |
| AdeeboMeter.exe | The app alone | |
| AdeeboMeter-1.1.1.zip | Source code |
Install in ten seconds: open the zip → double-click AdeeboMeter.exe → Install. It installs just for you — no administrator rights — and starts in the bottom-right corner of your screen.
Update: run the new exe and choose Update; your settings come along. Remove: Settings › Apps › AdeeboMeter.
Windows may show "Windows protected your PC" because AdeeboMeter isn't code-signed yet. Choose More info → Run anyway.
Requirements: Windows 10 or 11 (64-bit), .NET Framework 4.8 (built into Windows). Optional: Wireshark for live capture and Find my switch port.
A patch from the first day of use and four outside code reviews.
- New-device alerts are off by default. Phones join Wi-Fi with a private, changing hardware address, and office networks are full of other people's devices - so every new device is still listed in What changed, but a pop-up only comes if you choose Tell me when a new device joins → Home networks only (Settings). Even then: never on a company network or VPN, never for private addresses, not in the first day on a network, at most one an hour.
- Copy as text on every Toolbox result (including the MTU and MTR tables) - for a ticket or a chat. Built only when you press it; a RADIUS secret is never included.
- Neighbours (ARP table) in the Toolbox: who this PC has talked to on its network, with makers, private addresses and virtual routers. Nothing is sent.
- Replies are only taken from the server you asked. NTP, SNMP, RADIUS, TWAMP and DNS sockets are connected to that server; STUN checks the transaction ID and the server's address; NTP checks its answer echoes your question (and reports "kiss of death" and unsynchronised servers instead of an offset); TWAMP checks the reflector echoed your timestamp; SNMP checks it's a reply to this GET with no error.
- Harder parsing: the SNMP reader checks every length before using it, handles long values (descriptions over 127 bytes) and nesting has a limit; the JSON reader refuses nesting deeper than 64 (a hostile iperf3 server could otherwise end the app); DNS checks the TCP answer and every record's length. The RADIUS reply check is tested against RFC 2865's own example.
- Nothing waits forever: TLS handshakes give up after 8 s (HTTP timing, encrypted DNS, mail, TLS inspector); iperf3 streams connect within 5 s each and Stop is checked between them.
- Child programs never start in the folder AdeeboMeter runs from (Downloads): netsh, tshark, dumpcap and the rest start in their own folder, so they can't pick up a planted DLL.
- iperf3 always cleans up: Stop, or a test running a minute past its length, closes every socket at once (breaking any wait); sockets close even when a test fails; a stopped test says "stopped - no result" instead of a number.
- Clearer protocol verdicts: RADIUS tells "secret matches and Status-Server answered properly" from "signed with this secret but not the answer Status-Server expects"; SNMP checks the reply's community and handles out-of-range values; NTP refuses timestamps that don't add up and calls the offset what it is - an estimate from one server.
- Smaller: iperf3 rate capped at 10 Gb/s and port checked; the syslog test strips line breaks; TWAMP no longer claims a synced clock, accepts 40-byte replies and says when loss can't be put on a direction; Wake-on-LAN no longer shows green for a packet it can't confirm; sustained ping starts with 50 pings (10 s); a destination typed elsewhere no longer replaces the gateway in sustained ping and SNMP; "Settings > Online lookups" named correctly; the build workflow treats the release tag as data.
- File version in the exe has the four numbers Windows expects.
Verify your download
Built by GitHub Actions on a clean Windows machine with Microsoft's own .NET Framework compiler, from this exact source.
| File | SHA256 |
|---|---|
| AdeeboMeter.exe | 0245528a3ee617ef1dbc161de346332c5e1ae30f667f96bc6cd4197d1a954f2a |
| AdeeboMeter-1.1.1-win64.zip | 7e53681c60f1038a34461ad989f0594d9f71909178c49f6ef720a7bd953bcabf |
| AdeeboMeter-1.1.1.zip | 4a4b0698616b5ed2bd0ce0b713cb27d61992e992d36e9295d9112ce015fad8b2 |
In PowerShell: Get-FileHash .\AdeeboMeter.exe — the hash must match.
Feedback
Report a problem · Ideas & questions · Website & suggestion box · Full changelog
Created by Adeeb Khan · MIT License.