Skip to content

Releases

v0.1.22-alpha.4

v0.1.22-alpha.4 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 27 Oct 12:13
46363ab

Docs only. ADR 016 records the owner's decision of 27 October 2026: the seven-day credits run is waived, and the four-day record (1.0 credit per gadget-day, no commands) is Stage 0's number. ADR 016 stays Proposed. Nothing is sold and there are no payments. Component pins are unchanged: gateway v0.1.0-alpha.21, ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10, Home Assistant v0.1.0-alpha.6.

v0.1.22-alpha.3

v0.1.22-alpha.3 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 27 Oct 06:52
0875b80

Docs and site only (Phase 17).

  • The README and the website home page link the tester call (#185) and the builder call (#269), both pinned.
  • Drafts for the owner's posts are in community/drafts/phase17; nothing is posted.
  • Nothing is sold and there are no payments.

Component pins unchanged: gateway v0.1.0-alpha.21 (PyPI 0.1.0a21), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.6 (PyPI 0.1.0a6). The project runs no relay service.

v0.1.22-alpha.2

v0.1.22-alpha.2 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 25 Oct 17:38
e9fd73e

Docs-only patch closing Phase 16.

  • The relay backup record: the owner's relay runs gateway 0.1.0a21 with a nightly backup, and a backup pulled to the owner's Mac restored with credits verify, accounts list and firmware list identical to the relay.
  • The second credits run record: 1 credit per gadget-day again with no commands; the owner ended it on 24 October and the kit is back with the operator. ADR 016 stays Proposed.
  • Nothing is sold and there are no payments.

Component pins unchanged: gateway v0.1.0-alpha.21 (PyPI 0.1.0a21), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.6 (PyPI 0.1.0a6). The project runs no relay service.

v0.1.22-alpha.1

v0.1.22-alpha.1 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 24 Oct 05:18
efb1fa3

Phase 16 "Hygiene and reach", first release.

  • Pins gateway v0.1.0-alpha.21 (PyPI 0.1.0a21): backup writes a mode-0600 archive of the relay's config directory with its SHA-256; the relay guide adds a nightly timer, an off-host pull and a restore test. The restore was rehearsed on a synthetic relay; the owner's relay has not run it yet.
  • Pins Home Assistant v0.1.0-alpha.6 (PyPI 0.1.0a6): docs and tooling only.
  • Roadmap, project status and site are current: Phase 15 is complete on the owner's setup and ADR 016 stays Proposed. The first credits run (1.0 credit per gadget-day, no commands) and the second run to 30 October are told apart.
  • The releases page links "What passed" to the project status. Draft text is committed; renders stay private.
  • Nothing is sold and there are no payments.

Component pins: gateway v0.1.0-alpha.21 (PyPI 0.1.0a21), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.6 (PyPI 0.1.0a6). The project runs no relay service.

v0.1.21-alpha.2

v0.1.21-alpha.2 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 23 Oct 07:53
fda97bf

Docs-only patch for Phase 15.

  • The credits per gadget-day record: gadget-days were charged live for a non-operator owner on the owner's relay, at 1 credit per gadget-day. The kit got no commands during the run, so command use is not tested.
  • ADR 016 stays Proposed. Nothing is sold and there are no payments.

Component pins: gateway v0.1.0-alpha.20 (PyPI 0.1.0a20), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.5. The project runs no relay service.

v0.1.21-alpha.1

v0.1.21-alpha.1 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 21 Oct 08:18
83e8092

Phase 15 preparation.

  • ADR 016 (Proposed): how a customer could pay for a builder's relay. Customers would pay a builder by card, never with a wallet. The gateway stays payment-free. Operator and builder settlement happens only on a test network until legal review.
  • Nothing is sold and there are no payments. The roadmap and the website say so.

Component pins: gateway v0.1.0-alpha.20 (PyPI 0.1.0a20), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.5. The project runs no relay service.

v0.1.20-alpha.1

v0.1.20-alpha.1 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 20 Oct 12:29
30c2c28

Phase 14: who runs and pays for relays.

  • ADR 015 is accepted. Builders run their own relays now. A listing of independent operator relays waits for two outside operators. The project runs no relay (ADR 015).
  • A relay can keep credits per account: commands and online gadget-days use them, and the operator grants them. At zero, Grok Bot says the credits on that relay are used up. Signed receipts and a report check the use. No payments (guide).
  • Two people passed the acceptance on the owner's relay and kit on 20 October 2026 (record).

Component pins: gateway v0.1.0-alpha.20 (PyPI 0.1.0a20), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.5. The project runs no relay service.

v0.1.19-alpha.2

v0.1.19-alpha.2 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 20 Oct 08:01
e60e6ec

Patch release after the sign-in page review.

  • The owner reviewed the gateway's sign-in page again on 20 October 2026 and approved a calmer design: one instruction, one field and one button, with the rest under Help (record).
  • Gateway v0.1.0-alpha.19 (PyPI 0.1.0a19) ships it. The owner's relay runs it; the guides now install it.

Component pins: gateway v0.1.0-alpha.19 (PyPI 0.1.0a19), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.5. The project runs no relay service.

v0.1.19-alpha.1

v0.1.19-alpha.1 Pre-release
Pre-release

Choose a tag to compare

@adidshaft adidshaft released this 20 Oct 05:16
8692de3

Hub v0.1.19-alpha.1 (Phase 13: ready for others).

  • ADR 014 accepted: measured relay capacity, sign-in by Client ID Metadata Document, a clear sign-in page, long-poll, and the Android and Windows statements.
  • Measured on 18 October 2026 on one fresh 512 MB, 1-vCPU host with simulated gadgets: 200 gadgets polling every 100 ms at about 61 % CPU and 88 MB, p95 command latency 304 ms; 1,000 gadgets with long-poll at about 67 % CPU and 137 MB, p95 406 ms. 1,000 gadgets polling every 100 ms did not fit that host. These are measurements of one host, not guarantees (record).
  • On the owner's setup: the relay runs gateway 0.1.0a18; the kit took ESP32 v0.2.0-alpha.19 by signed update and long-polls; Grok Bot on an Android phone signed in on the new page with the kit's code and showed text; Grok Bot's sign-in renewed itself 26 times over 39 hours with no fresh sign-in.
  • Not tested: Grok Bot signing in by a metadata document (it still uses dynamic registration), Windows, the 30-day refresh lifetime, and an outside builder or tester (#269, #185). Tester and builder calls are drafted in community/drafts/phase13; nothing is posted.

Component pins: gateway v0.1.0-alpha.18 (PyPI 0.1.0a18), ESP32 SDK v0.2.0-alpha.19, Linux SDK v0.1.0-alpha.10 (PyPI 0.1.0a10), Home Assistant v0.1.0-alpha.5. The project runs no relay service.

v0.1.18-alpha.1

Choose a tag to compare

@adidshaft adidshaft released this 17 Oct 22:02
25b363f

Hub v0.1.18-alpha.1 (Phase 12a: builder kit).

  • ADR 013 accepted: one-command relay setup, the full preflight, batches with labels, a builder report, the Linux relay connection and a capability vocabulary.
  • Record: on 17 October 2026 a clean-room run and the owner's dry run on a fresh host followed the guide. Relay up, preflight, a batch of three (the OLED kit and two Linux gadgets), phone setup, claim, Grok Bot text, a signed update and the builder report all passed. The host was then destroyed and the kit returned to the main relay (record). The runs found eight gaps; all are fixed or documented.
  • New guides: Ship a gadget in one afternoon; Capability vocabulary. A second-builder call is drafted and not posted.
  • Today, next and later, the roadmap and the status page describe Phase 12a; next is a builder outside the project (#269).
  • Pins gateway v0.1.0-alpha.17 (PyPI 0.1.0a17), ESP32 SDK v0.2.0-alpha.18, Linux SDK v0.1.0-alpha.9 (PyPI 0.1.0a9) and Home Assistant v0.1.0-alpha.5; the simulator kit is rebuilt from gateway alpha.17.

One builder (the owner), one kit, two simulated Linux gadgets. The climate sensor, switch and servo examples are not tested on hardware.