You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
LoRa and LoRaWAN knowledge, included with a free account: point-to-point LoRa and LoRaWAN on nRF and ESP32 boards
with a Semtech radio. The modulation and its parameters, regions, duty cycles and link budgets, the Semtech SX126x,
SX127x, LR2021 and SX130x parts, LoRaWAN internals (join, class A receive windows, frame counters, MAC commands,
payload codecs, keys), and how to build a node on nRF Connect SDK or ESP-IDF. Verified on an nRF52840 with an
SX1262. Knowledge contributed by Omar Morceli.
LoRa is detected from the project, as cellular and GNSS are: CONFIG_LORA in the configuration or a Semtech sx12xx devicetree node on nRF Connect SDK, a LoRa driver or RadioLib among the components or in the configuration
on ESP-IDF. The LoRa knowledge then loads on its own.
Tool bits for LoRa: time on air and the duty-cycle budget of a packet, to check before a spreading factor is
chosen; an SX126x status, IRQ or error word decoded into plain words, with what to try next; a capture turned into
a report that says which devices were heard and how much of the band was listened to.
Changed
A free registered account now opens LoRa knowledge beside cellular, satellite and on-device inference. The gate
panel and the unlocked card say so.
The account screen names the sets your account opens; a set this build has no word for is left off rather than
shown as a raw id.