Repository navigation
Releases
1.10.0
- French README (README.fr.md). Thanks to @Marlboro62.
- Security popup: doors, windows, gates and locks show their room first and their name below, so two windows that are both called "Window" can be told apart. A name that already contains the room stays as it is.
- Meter readings on the energy page: a card that opens the current readings of the grid, gas and water meters from Home Assistant's energy settings.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.9.0
- Security badge on Home, the security card, the security page and the SecurityPanel count the same things as the security popup. A lock that shows once together with its lock sensor, like a car's, no longer counts as open while it reports unknown or unavailable.
- Light groups (room → Customise → Add devices): group helpers can be added to a room by hand now. They still don't show up on their own, and the floor buttons, the Light chip and the room counts keep using the single lamps.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.8.0
- Detector alarms on Home (Settings → Home → Notices → Detectors): a red notice on Home while a smoke, leak or gas detector raises the alarm, with its room and what it found.
- Weak detector batteries: a notice on Home when a detector's battery is at 20 % or less. Devices you put aside under Maintenance don't count. Both can be switched off together.
- Battery in the energy popup: the home battery is its own circle below the grid. The line runs into the battery while it charges and into the house while it gives.
- Energy chip (Settings → Home → Status chips): shows the grid as before, or the whole house with solar and battery.
- Water on the energy page: a card with litres, cost and the change to the day before, and a thin row of water bars below the chart. A tap opens today, this week and this month, and the flow right now when there is a flow sensor. Uses the water meter from Home Assistant's energy settings.
- Night view for wall tablets (Settings → This screen → Night view): at night the tablet turns into a security screen with the chosen cameras live and large, the rest small, locks, gates and open doors, and the alarm modes. Night by the sun or set times. A tap shows Home for 2 minutes. Pick whether it takes the screensaver's place at night or both come.
- Leaving home now lists thermostats that are heating. Tick them and they go to their away or eco mode, or off if they have neither. Off by default, and Undo puts them back too.
- Remote in the player popup: a player whose device has a remote in Home Assistant gets a second tab with the arrows, OK, back, home and menu, next to volume, source and playback. Held arrows repeat. Works with Apple TV, Android TV, Roku, Samsung, Sony Bravia, Philips and LG. Players without a remote look as before.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.7.2
- Leak and gas sensors are no longer called smoke alarms. The group in the security popup is named after what it holds: smoke alarms, leak sensors, gas detectors, or detectors for a mix, with a matching icon and alarm text like Water detected!.
- Home battery on the energy page: charging no longer counts as use and discharging does, as in Home Assistant's own energy dashboard. The battery gets its own part in the chart, and what came out of it counts for self-sufficiency.
- Energy popup: the house total includes the battery, and a tile shows whether it charges or discharges right now.
- Energy settings in the older format (grid power under power, meter under flow_from) are read too. Before, the energy chip and today's grid use and cost were missing there.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.7.1
- Time to air (Settings → Home → Notices): a notice on Home for each room with 1400 ppm CO₂ or more, or 70 % humidity or more. Not while a window in the room is open, and not for outdoor rooms or sensors.
- Lock changes (Settings → System): Edit and the settings for everyone, only for admins, or only with a PIN. With Admins only the buttons are gone for everyone else. After the PIN they stay open for 10 minutes. Meant against changes by accident on a family tablet, Home Assistant's own user rights still apply.
- Timers in the room popup: the Light and Switches tiles show when the next one goes off, and each lamp and switch in the list shows its time left.
- README: new screenshots, and after an update restart Home Assistant (a reload of the integration is not enough).
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.7.0
- Screensaver for wall tablets (Settings → This screen → Screensaver): after 2 to 30 minutes without a touch the screen shows the time, the date, the weather and what is left of today. It moves a little every minute and is darker at night. A tap brings HausPanel back, and so does the doorbell. Not on the phone or the security screen.
- Timers for lights, switches and fans: hold a tile and pick Switch off in 15 min, 30 min, 1 h or 2 h. The tile shows how long is left. Home Assistant runs the timer, so it also works with the tablet off and after a restart. Switching off by hand ends it.
- Window open, heating on (Settings → Home → Notices): a notice on Home for each room where a window is open while its heating runs. A tap opens the thermostat.
- Floor, room and home buttons switch the lights a few at a time instead of all in one go. Some integrations got too many commands at once and lamps were left behind. Lamps that didn't follow are now named, with Try again.
- Info for a bug report (Settings → System): versions, panel, layout and device in a few lines to copy into an issue. Nothing personal goes in.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.6.7
- Music card on Home now looks like a room card: the room on top (or the source when the player has no room), title and artist in the middle, progress and round buttons for play/pause and next below. While something plays or is paused, its cover sits dimmed behind the card. When the card is low, like on the phone, the artist is left out.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.6.6
- Update notice: after an update HausPanel tells you when Home Assistant still runs the old version and offers Restart (admins only, tap twice). A screen that still shows older code than Home Assistant offers Reload. Both can be closed with ×. This works from the next update after this one.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.6.5
- Long room names (Settings → Rooms): when a name doesn't fit next to the buttons, cut it with … as before, set it smaller, or let it wrap onto a second line.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥
1.6.4
- Room temperature with a decimal (Settings → Rooms): shows 21.7° instead of 22° on the room tiles.
- Rooms whose name sounds like something else now find their thermometer: an attic called Dachboden was taken for a floor sensor, a Wintergarten for the garden outside.
Update: HACS shows the update under HACS → HausPanel. After updating, restart Home Assistant and reload the dashboard once.
Install: HACS → ⋮ → Custom repositories → add https://github.com/alpacalabs-de/hauspanel as Integration, install HausPanel, restart Home Assistant, then Settings → Devices & services → Add integration → HausPanel. New here? The step-by-step guides help with the first setup.
If HausPanel saves you time, you can buy us a coffee on Ko-fi. ♥