Integration with STM32L432Kc

[Rajkumar181]

Hello Team,

I need your support to set up EV-ADE9153A with stm32l4. If you have any example code or any document please help me.

[mirceacaprioru]

Hi Rajkumar,

Here is the Arduino sketch for that project:
https://github.com/analogdevicesinc/arduino/blob/master/Arduino%20Uno%20R3/examples/ADE9153A_examples/ADE9153AAPI_Test/ADE9153AAPI_Test.ino

Also check this page for guides:
https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/eval-ade9153a.html#eb-overview

Regards,
Mircea

[Rajkumar181]

Dear Mircea,

Thank you for your kind and helpful reply. I have used this example code with the Arduino Uno board and it's working perfectly.

Now we have using STM32l432KC instead of Arduino. I have bring-up this SPI interface and I am able to send the data to ADE9153A.
Now the problem is I am confused about what I have written the code is correct or not because I am not getting ADE9153A.

Code:

#define REG_VERSION_PRODUCT 0x0242

    uint8_t array[2]={ REG_VERSION_PRODUCT & 0xff, REG_VERSION_PRODUCT >> 8 };
     HAL_GPIO_WritePin(SPI_SEL1_GPIO_Port,SPI_SEL1_Pin,0);
 HAL_SPI_TransmitReceive(&_ADE9153A_SPI,(uint8_t *)&array,&ret[0],2,50);
     HAL_GPIO_WritePin(SPI_SEL1_GPIO_Port,SPI_SEL1_Pin,1);

In "ret" i am not getting device version, "0x0009153A". I have checked the clock, MOSI, SS pin, I can see the clock on the oscilloscope. Can you please suggest..!

[Rajkumar181]

Thank you for your support. I have resolved the issue and now it is working perfectly.