Skip to content

Releases

LG510S-4T2XS OpenWrt test build 2026-11-03 (rc4)

Choose a tag to compare

@andrebrait andrebrait released this 03 Nov 00:40
cfea303

Fourth test build of OpenWrt for the switch board with PCB marking PCB-510S-4T2XS-V1_0_1-19676. It is sold under these names:

Brand Model Status
Lianguo LG510S-4T2XS Tested
GoodTop LG510S-4T2XS Tested
Horaco ZX510S-4T2XS Reported to be the same board, not tested
HRUI HR510S-4T2XS Reported to be the same board, not tested
Sodola SL510S-4T2XS Reported to be the same board, not tested
MokerLink 10G04210GSM Reported to be the same board, not tested

For an untested name, open the case and check the PCB marking before flashing.

This is a pre-release. It runs on three units, all installed from stock firmware 1.1.1.34: two through the stock web interface and one from U-Boot over TFTP.

Changes since v2026.11.01-rc3:

  • The web interface uses the Footstrap theme with its sidebar layout by default. Bootstrap, the stock theme, is still included; switch under System -> System -> Language and Style, or change Footstrap's layout under System -> Footstrap.
  • The Ports page cards use their full width in every theme.

Changes in v2026.11.01-rc3:

  • Status -> Ports shows "-" instead of "no link" when ethtool reports nothing for a port.

Changes in v2026.10.31-rc2:

  • Status -> Overview shows the CPU temperature.
  • Status -> Ports shows each port's temperature: the PHY sensor for copper ports, the module diagnostics for SFP+ modules that report them.
  • Statistics -> Graphs is included, with the temperature (Thermal, Sensors), load and memory graphs enabled. The graph history is kept in RAM.

Files

File Use
...-squashfs-factory.bix First install, from the stock web interface (Getting started in the README)
...-squashfs-sysupgrade.bin Updates from OpenWrt; keeps the configuration
...-initramfs-kernel.bin RAM boot from U-Boot, for installation over serial and recovery
...manifest Installed packages
sha256sums.txt Checksums

Defaults

  • The switch asks for an address by DHCP. With no lease, it uses 192.168.1.1/24.
  • IPv6 is off.
  • HTTP redirects to HTTPS, with a self-signed certificate.
  • The root password is empty; set one after the first login.
  • LLDP and SNMP are installed but off. LLDP advertises the model, LG510S-4T2XS, as the system description.
  • EEE and flow-control advertisement are on for the copper ports.
  • The temperature graphs are on.
  • The web interface uses Footstrap in its sidebar layout.

Build

  • OpenWrt 19483fa9075686e7a627c777e09c0a24163c8323, with openwrt/0001-realtek-rtl930x-add-Lianguo-LG510S-4T2XS.patch and openwrt/0002-switchdev-config-add-package.patch from this repository.
  • The packages feed at 76bf8b2.
  • The LuCI feed at c1b79e8, with the nine openwrt/luci-*.patch files.

Known issues

  • On one unit the stock firmware hung while rebooting after the upgrade. A power cycle booted OpenWrt, because the image was already written.
  • Applying network changes live (/etc/init.d/network reload, or Save & Apply on device settings) once left a switch unreachable until it was power-cycled. Apply network changes with a reboot instead.

Keep the backups of the stock image and configuration that the stock interface lets you download before installing. They are the way back to stock.

LG510S-4T2XS OpenWrt test build 2026-11-01 (rc3)

Choose a tag to compare

@andrebrait andrebrait released this 01 Nov 11:16
9a95ada

Third test build of OpenWrt for the switch board with PCB marking PCB-510S-4T2XS-V1_0_1-19676. It is sold under these names:

Brand Model Status
Lianguo LG510S-4T2XS Tested
GoodTop LG510S-4T2XS Tested
Horaco ZX510S-4T2XS Reported to be the same board, not tested
HRUI HR510S-4T2XS Reported to be the same board, not tested
Sodola SL510S-4T2XS Reported to be the same board, not tested
MokerLink 10G04210GSM Reported to be the same board, not tested

For an untested name, open the case and check the PCB marking before flashing.

This is a pre-release. It runs on three units, all installed from stock firmware 1.1.1.34: two through the stock web interface and one from U-Boot over TFTP.

Changes since v2026.10.31-rc2:

  • Status -> Ports shows "-" instead of "no link" when ethtool reports nothing for a port.

Changes in v2026.10.31-rc2:

  • Status -> Overview shows the CPU temperature.
  • Status -> Ports shows each port's temperature: the PHY sensor for copper ports, the module diagnostics for SFP+ modules that report them.
  • Statistics -> Graphs is included, with the temperature (Thermal, Sensors), load and memory graphs enabled. The graph history is kept in RAM.

Files

File Use
...-squashfs-factory.bix First install, from the stock web interface (Getting started in the README)
...-squashfs-sysupgrade.bin Updates from OpenWrt; keeps the configuration
...-initramfs-kernel.bin RAM boot from U-Boot, for installation over serial and recovery
...manifest Installed packages
sha256sums.txt Checksums

Defaults

  • The switch asks for an address by DHCP. With no lease, it uses 192.168.1.1/24.
  • IPv6 is off.
  • HTTP redirects to HTTPS, with a self-signed certificate.
  • The root password is empty; set one after the first login.
  • LLDP and SNMP are installed but off. LLDP advertises the model, LG510S-4T2XS, as the system description.
  • EEE and flow-control advertisement are on for the copper ports.
  • The temperature graphs are on.

Build

  • OpenWrt 19483fa9075686e7a627c777e09c0a24163c8323, with openwrt/0001-realtek-rtl930x-add-Lianguo-LG510S-4T2XS.patch and openwrt/0002-switchdev-config-add-package.patch from this repository.
  • The packages feed at 76bf8b2.
  • The LuCI feed at c1b79e8, with the nine openwrt/luci-*.patch files.

Known issues

  • On one unit the stock firmware hung while rebooting after the upgrade. A power cycle booted OpenWrt, because the image was already written.
  • Applying network changes live (/etc/init.d/network reload, or Save & Apply on device settings) once left a switch unreachable until it was power-cycled. Apply network changes with a reboot instead.

Keep the backups of the stock image and configuration that the stock interface lets you download before installing. They are the way back to stock.

LG510S-4T2XS OpenWrt test build 2026-10-31 (rc2)

Choose a tag to compare

@andrebrait andrebrait released this 31 Oct 19:40
47a621a

Second test build of OpenWrt for the switch board with PCB marking PCB-510S-4T2XS-V1_0_1-19676. It is sold under these names:

Brand Model Status
Lianguo LG510S-4T2XS Tested
GoodTop LG510S-4T2XS Tested
Horaco ZX510S-4T2XS Reported to be the same board, not tested
HRUI HR510S-4T2XS Reported to be the same board, not tested
Sodola SL510S-4T2XS Reported to be the same board, not tested
MokerLink 10G04210GSM Reported to be the same board, not tested

For an untested name, open the case and check the PCB marking before flashing.

This is a pre-release. It runs on three units, all installed from stock firmware 1.1.1.34: two through the stock web interface and one from U-Boot over TFTP.

Changes since v2026.10.31-rc1:

  • Status -> Overview shows the CPU temperature.
  • Status -> Ports shows each port's temperature: the PHY sensor for copper ports, the module diagnostics for SFP+ modules that report them.
  • Statistics -> Graphs is included, with the temperature (Thermal, Sensors), load and memory graphs enabled. The graph history is kept in RAM.

Files

File Use
...-squashfs-factory.bix First install, from the stock web interface (Getting started in the README)
...-squashfs-sysupgrade.bin Updates from OpenWrt; keeps the configuration
...-initramfs-kernel.bin RAM boot from U-Boot, for installation over serial and recovery
...manifest Installed packages
sha256sums.txt Checksums

Defaults

  • The switch asks for an address by DHCP. With no lease, it uses 192.168.1.1/24.
  • IPv6 is off.
  • HTTP redirects to HTTPS, with a self-signed certificate.
  • The root password is empty; set one after the first login.
  • LLDP and SNMP are installed but off. LLDP advertises the model, LG510S-4T2XS, as the system description.
  • EEE and flow-control advertisement are on for the copper ports.
  • The temperature graphs are on.

Build

  • OpenWrt 19483fa9075686e7a627c777e09c0a24163c8323, with openwrt/0001-realtek-rtl930x-add-Lianguo-LG510S-4T2XS.patch and openwrt/0002-switchdev-config-add-package.patch from this repository.
  • The packages feed at 76bf8b2.
  • The LuCI feed at c1b79e8, with the nine openwrt/luci-*.patch files.

Known issues

  • On one unit the stock firmware hung while rebooting after the upgrade. A power cycle booted OpenWrt, because the image was already written.
  • Applying network changes live (/etc/init.d/network reload, or Save & Apply on device settings) once left a switch unreachable until it was power-cycled. Apply network changes with a reboot instead.

Keep the backups of the stock image and configuration that the stock interface lets you download before installing. They are the way back to stock.

LG510S-4T2XS OpenWrt test build 2026-10-31

Choose a tag to compare

@andrebrait andrebrait released this 31 Oct 18:52
a4d5062

First test build of OpenWrt for the switch board with PCB marking PCB-510S-4T2XS-V1_0_1-19676. It is sold under these names:

Brand Model Status
Lianguo LG510S-4T2XS Tested
GoodTop LG510S-4T2XS Tested
Horaco ZX510S-4T2XS Reported to be the same board, not tested
HRUI HR510S-4T2XS Reported to be the same board, not tested
Sodola SL510S-4T2XS Reported to be the same board, not tested
MokerLink 10G04210GSM Reported to be the same board, not tested

For an untested name, open the case and check the PCB marking before flashing.

This is a pre-release. It runs on three units, all installed from stock firmware 1.1.1.34: two through the stock web interface and one from U-Boot over TFTP.

Files

File Use
...-squashfs-factory.bix First install, from the stock web interface (Getting started in the README)
...-squashfs-sysupgrade.bin Updates from OpenWrt; keeps the configuration
...-initramfs-kernel.bin RAM boot from U-Boot, for installation over serial and recovery
...manifest Installed packages
sha256sums.txt Checksums

Defaults

  • The switch asks for an address by DHCP. With no lease, it uses 192.168.1.1/24.
  • IPv6 is off.
  • HTTP redirects to HTTPS, with a self-signed certificate.
  • The root password is empty; set one after the first login.
  • LLDP and SNMP are installed but off. LLDP advertises the model, LG510S-4T2XS, as the system description.
  • EEE and flow-control advertisement are on for the copper ports.

Build

  • OpenWrt 19483fa9075686e7a627c777e09c0a24163c8323, with openwrt/0001-realtek-rtl930x-add-Lianguo-LG510S-4T2XS.patch and openwrt/0002-switchdev-config-add-package.patch from this repository.
  • The packages feed at 76bf8b2.
  • The LuCI feed at c1b79e8, with the seven openwrt/luci-*.patch files.

Known issues

  • On one unit the stock firmware hung while rebooting after the upgrade. A power cycle booted OpenWrt, because the image was already written.
  • Applying network changes live (/etc/init.d/network reload, or Save & Apply on device settings) once left a switch unreachable until it was power-cycled. Apply network changes with a reboot instead.

Keep the backups of the stock image and configuration that the stock interface lets you download before installing. They are the way back to stock.