Repository navigation
Releases
1.0.4
Radio / power
Auto Power OFF in Server Settings: the TS-890 is switched off after a number of idle minutes with no browser client and no front-panel activity.
Controls
Manual notch: NT/NW/BP commands, NOTCH key and NCH slider, notch and NR/NB/BC labels in the audio scope (not in AM/FM).
RIT/XIT: the frequency display shows VFO+offset, the scope is centred on the RX/TX line, R/T markers.
VFO STEP with the keyboard: left/right arrow keys change the frequency in a configurable step (10 Hz – 100 kHz).
New tuning wheel (Easy Mode and desktop) with detent, friction, coasting, settings on double click.
Audio scope header click steps filter A/B/C.
NEW User-Chat
New chat between connected browsers: names, history saved in the config, admin can delete single lines or clear everything, on/off switch in Server Settings / User.
Users / access
New console command to add user via cli to the system (-adduser LOGIN).
Confirmation before switching the TS890 off while other clients are connected.
The login message default is generic now. Your own text stays in your users file.
SPE PA Antenna Switching
Antenna Output port on attached SPE EXPERT PA can be switched now (if configured in PA in active band)
1.0.3
Open890RC v1.0.3 – What’s new since 1.0.2
New features
Audio scope. The radio’s audio spectrum is now shown on the desktop, next to the sliders and at the top of the filter settings, in the style of the TS-890 display (filter letter, LC/BW/HC, filter curve, centre line, RFT). While transmitting it shows the TX filter. Click it to switch the look (gradient to light grey, green, outline only), long-press it to open the filter settings.
TX messages (the radio’s voice message memory). Six channels: record from the browser over LAN with an ALC meter, play, send, repeat, rename, delete. The radio’s beep is muted while you record. Experimental: the recording sound quality is not perfect yet.
Easy Mode for the phone: a combined meter and TX window, with the T key as push-to-talk.
Meter. Click the analog meter to switch to bar meters, including an ALC bar with the “still OK” marker.
Waterfall. On the desktop you can drag the boundary between spectrum and waterfall with the mouse (double-click resets it). The waterfall now follows the window height, up to 800 rows.
Improvements
Audio. Output and microphone fall back to the default device when one disappears. CarPlay is picked automatically when it appears. Microphone sensitivity is remembered per microphone. REC saves the unscaled signal. A warning appears if the microphone runs at the wrong sample rate.
Spectrum. Automatic headroom for strong signals instead of hard clipping.
Filter settings. A wider window with centred rows, the width/shift/APF sliders in the same flat look as the Hi/Lo-cut slider, and a wrench icon in the filter dropdown.
Server settings. A tab’s status message is cleared when you switch to another tab.
Translations (English, Italian, Spanish) for the new windows.
Fixes
The frequency keypad stayed visible after the radio was switched off.
The blur used while the radio is off also blurred the status line.
A stale audio output device (for example CarPlay) did not fall back to the default.
1.0.2
New
RX/TX equalizer curve editor: adjust all 18 bands (0–5100 Hz, +6 to −24 dB) for any of the 9 effects, with live sliders
TX button “hold to talk” mode: TX only while the button is held (new default). Toggle mode available under Settings
The T key (push-to-talk) now also works while sound-related setting windows are open (EQ, NR, NB, TX monitor, PROC, filter, VoIP/MIC), so changes can be heard live.
Improved
TX button turns red immediately on press instead of waiting for the radio’s confirmation (the Busy/TX LED still shows real transmission).
The selected TX/RX equalizer effect is saved at connect, restored when the session ends, and your last chosen effect is re-applied on connect (the curve itself is not stored).
Page title now matches the app name, so the web-app window no longer shows the name twice.
Fixed
Stale audio output device (for example CarPlay) now falls back to the default device if not exists anymore
1.0.1
Waterfall / Spectrum requires center mode active, so Band scope center mode (BS3) is set/restored automatically
Analog meter overlay: long press opens needle settings (inertia, peak hold, release) + RIT/XIT/NR tooltips
Per-user New TX right: flag (default: allowed), blocks TX button/PTT/microphone, enforced server-side
TX microphone fix: AudioContext/worklet stay warm (no more needle/waterfall stutter on TX press)
TX Mic Limiter: Gentle/Strong preset dropdown