Skip to content

XPan v1.0

Choose a tag to compare

@anibarro anibarro released this 28 Oct 23:41
· 14 commits to xpan-features since this release

XPan v1.0 for the Canon EOS M

The first release of XPan, a Magic Lantern build that turns the original
Canon EOS M (firmware 2.0.2) into a panoramic camera inspired by the
Hasselblad XPan: 65:24 framing, a dedicated shooting HUD, custom 3D LUT looks
applied by the camera itself, film grain and an optional watermark.

Warning

EOS M with firmware 2.0.2 only. This is experimental firmware software
that runs inside Canon's own image pipeline. Use it at your own risk, like
any Magic Lantern build.

Important

Disable all other Magic Lantern modules. XPan changes Canon's colour
tables, JPEG encoder, sensor crop, key handling and several properties, so it
is incompatible with almost every module. This release ships no modules.
If your card has an older Magic Lantern install, delete the .mo files in
ML/MODULES/ (or turn every module OFF) before using XPan.

Highlights

Panoramic shooting

  • 65:24 or 3:2 framing. In 65:24 the JPEG is cropped by Canon's own
    encoder to the full sensor width (5184 × 1920). RAW files keep the full
    3:2 frame.
  • Frame alignment top or bottom, leaving the free band for the HUD.
  • Photo HUD with shutter, aperture, ISO, EV, white balance, drive, metering,
    LUT, format, battery, time and card space; four colour themes and an
    optional rule-of-thirds grid.
  • Direct controls: the wheel and arrow keys change the selected HUD field,
    touch selects fields, and a short press of SET cycles focus magnification
    1x / 5x / 10x.

Looks (Custom LUT)

  • Any .cube file from ML/XPAN/LUTS/ (up to 33³), with adjustable strength,
    converted into Canon's native colour table, so the look appears in
    Live View, the saved JPEG and movie mode.
  • Cineon log tone base with +1 or +2 EV of extra highlight headroom, so
    highlights Canon would clip survive into the LUT.
  • Changing LUTs is instant to browse: the name follows the wheel while a
    centred "Loading..." box shows that the camera is preparing it.
  • Four sample looks included: B&W, Cine FUJI, Cine Kodak and
    Cineon to rec709 (plus a neutral DEBUG_IDENTITY reference).

Film grain

  • Film (soft, brightness-dependent) or Canon (Canon's own Grainy filter
    engine), three sizes, adjustable strength. Applied to the saved JPEG only.

Watermark

  • XPan logo in Orange or White, small (386 px) or big (776 px),
    top-left or bottom-left.
  • Optional LUT name next to the logo, in the logo's colour, set in the
    OneSlot typeface.

Movie mode

  • The same Custom LUT on Live View and on the recorded H.264.
  • 1:1 crop (1920 × 1080 from the sensor centre, about 3x): press SET while
    not recording.

Installation

  1. Use a card that already boots Magic Lantern on your EOS M 2.0.2, or prepare
    one following the usual Magic Lantern instructions (the ML-SETUP.FIR
    firmware update is included in the zip).
  2. Unzip XPan-EOSM-202-v1.0.zip to the root of the card, replacing
    existing files.
  3. Delete any old .mo files from ML/MODULES/ (see the warning above).
  4. Put the camera in photo mode, open the Magic Lantern menu and enable
    Shoot > XPan (SET toggles it, PLAY opens its options).
  5. For looks, set Canon's Picture Style to Neutral and turn Highlight Tone
    Priority
    and Auto Lighting Optimizer OFF.

Menu overview

Shoot > XPan (SET: ON/OFF, PLAY: options)

Row SET PLAY opens
Custom LUT ON / OFF Cube file, Refresh Cube list, Cube strength, Tone base, Highlight headroom, Live LUT preview
Film grain ON / OFF Grain strength, Grain type, Grain size
Watermark ON / OFF Logo colour, Position, Size, LUT name

plus Aspect ratio, Frame alignment, capture format and quality, HUD,
grid, colour theme and status options.

Making your own LUTs

Looks are standard 3D .cube files from DaVinci Resolve or any similar tool:

  • Input: Rec.709 gamut with Cineon Film Log gamma (with the default
    Tone base = Cineon log). With Tone base = Canon Neutral the input is
    plain Rec.709.
  • Output: Rec.709 display.
  • Size: 17-point recommended; 2 to 33 points are accepted (65-point files
    are not). Every LUT is resampled onto Canon's 10 × 10 × 10 table, so very
    narrow corrections come out slightly softer than in Resolve.
  • Up to 16 files with plain ASCII names. Copy them to ML/XPAN/LUTS/ and use
    Refresh Cube list.

Known limitations

  • EOS M (first generation) with firmware 2.0.2 only.
  • Grain, watermark and the 65:24 crop apply to JPEGs; RAW files are untouched.
  • Canon Creative Filters must be OFF for film grain.
  • Not compatible with other Magic Lantern modules.
  • Files copied to ML/XPAN/ are read once per boot: restart the camera after
    replacing tone bases, logos or the font (new LUTs only need
    Refresh Cube list).

Building from source

Branch xpan-features, with arm-none-eabi-gcc (12.x tested), make,
python3 + docutils and zip:

build_tools/build_xpan.sh

On Windows, RUN_XPAN_BUILD.cmd runs the same build through WSL. The result is
platform/EOSM.202/build_xpan/magiclantern.zip. See README-XPAN.md for the
full manual.

Credits and licences

  • Built on Magic Lantern
    (GPL).
  • OneSlot typeface by Darren Rigby (Starving-4 Entertainment, 2003),
    distributed under the Design Science License.
  • XPan is an independent project, not affiliated with Canon, Hasselblad or
    Fujifilm.

Download

File SHA-256
XPan-EOSM-202-v1.0.zip 49cca533f227ee53185d458b71c2dd7d9165a6194932dfd877bef07cebdf1102

Build c65ea6400 (xpan-features), 2026-10-28 23:33 UTC.

Important

Check latest release for downloads:
https://github.com/anibarro/magiclantern_simplified/releases