Skip to content

MiSTer Media Player v0.3.0

Pre-release
Pre-release

Choose a tag to compare

@aquasock aquasock released this 14 Aug 07:26

MiSTer Media Player v0.3.0

v0.3.0 is the Phase 1T milestone release. It preserves the hardware-proven
continuous progressive 4:2:0 all-I playback path from v0.2.0 and adds the first
hardware-proven predictive-picture reconstruction infrastructure.

Highlights

  • Added H.262 reference-picture bookkeeping and reference/destination DDR-bank ownership.
  • Added controlled P-picture syntax and motion-vector handling.
  • Added forward-prediction reference reads, including zero-vector copying and
    half-sample interpolation diagnostics.
  • Added controlled non-intra P residual parsing and prediction-plus-residual reconstruction.
  • Added ordinary DDR persistence/readback for complete controlled 4:2:0 P macroblocks.
  • Extended P reconstruction from one macroblock to two adjacent macroblocks and
    then four macroblocks across two raster rows.
  • Replaced fixed macroblock placement with explicit raster row/column tracking.
  • Connected the P raster path to live coded horizontal geometry using the H.262
    (horizontal_size + 15) / 16 macroblock-width rule.
  • Preserved the existing continuous all-I playback and Phase 1P timing/CDC baseline.

Current supported subset

  • Raw MPEG-2 Video elementary-stream input (.m2v).
  • Progressive 4:2:0 I-picture playback on the established supported path.
  • Controlled, hardware-proven P-picture diagnostic/reconstruction subsets.
  • Two planar MiSTer DDR3 frame banks used for ping-pong/reference storage.
  • Fixed 800x600 diagnostic video output.
  • Synthetic 33-bit / 90 kHz elementary-stream presentation timing metadata.

Known limitations

P-picture support in v0.3.0 is intentionally narrow and diagnostic. This release
does not claim general arbitrary MPEG-2 P-picture playback.

The following remain unsupported:

  • B pictures.
  • General MPEG-2 Program Stream (.mpg / .mpeg) demux.
  • H.222.0 PES-derived timestamps.
  • Audio.
  • DVD/VOB playback and DVD navigation.
  • Broader H.262 picture structures and chroma formats.

Hardware validation

The exact tagged release commit is:

b24fc46392e3cff2c312080f23fcd9bc0e8e0ff3

It was accepted using a clean/from-scratch Quartus build with the standard
Phase 1P timing reports and the required MiSTer hardware regression set.

Hardware regression tests:

  • test_p_four_mb_two_row.m2v — PASS
  • test_p_two_mb.m2v — PASS
  • test_p420_recon.m2v — PASS
  • test_ip_only.m2v — PASS
  • test_all_i.m2v — PASS
  • test_all_i_q1.m2v — PASS
  • test_flat_gray_i.m2v — PASS

Quartus / timing

  • ALMs: 18,250 / 41,910 (44%)
  • Registers: 28,263
  • Block memory bits: 417,537
  • RAM blocks: 64
  • DSP blocks: 72
  • Global setup slack: +0.534 ns
  • Global hold slack: +0.246 ns
  • Global recovery slack: +3.696 ns
  • Global removal slack: +0.637 ns
  • Focused decoder setup: +2.732 ns, 0 / 100 violations
  • Focused video setup: +7.699 ns, 0 / 80 violations
  • TNS: 0

MiSTer binary

The release binary follows the normal MiSTer date-coded naming convention:

MediaPlayer_20260814.rbf

The binary attached to this release is the user-built and hardware-accepted
release artifact corresponding to the tagged source.

Full Changelog: v0.2.0...v0.3.0