Skip to content

MiSTer Media Player v0.4.0

Pre-release
Pre-release

Choose a tag to compare

@aquasock aquasock released this 16 Aug 09:04

MiSTer Media Player v0.4.0 release notes

v0.4.0 is the first hardware-qualified MiSTer Media Player milestone that combines the established progressive 4:2:0 I-picture path, the generalized P-picture reconstruction path, and a bounded hardware-proven B-picture decode/presentation path. The milestone remains developer-oriented and intentionally narrower than general MPEG-2/H.262 conformance.

Highlights

  • Preserved the continuous progressive 4:2:0 all-I playback path and generalized syntax-derived P-picture reconstruction introduced during the v0.4.0 development cycle.
  • Added a hardware-proven B-picture reconstruction path with forward, backward, and bidirectional prediction on deterministic mixed I/P/B regression streams.
  • Added B-picture residual reconstruction, macroblock-address skip handling, reference selection, and coded-order/display-order handling for the proven progressive 4:2:0 subset.
  • Added a dedicated B scratch DDR region so B reconstruction does not overwrite retained I/P references.
  • Corrected DDR region identity to use the full two-bit region selector, keeping retained bank 0, retained bank 1, and B scratch distinct during display-write protection.
  • Added blanking-aligned B presentation/reorder handling that retains the future P reference while presenting the intervening B picture from scratch, then publishes the retained future reference in display order.
  • Corrected the consecutive-P publication-versus-presentation ownership race by pacing a following P picture until its selected destination bank is no longer display-owned, without weakening DDR write protection or changing the B reorder path.
  • Consolidated the active inverse-transform implementation around a shared IDCT multiplier bank, reducing DSP use from the earlier 92-DSP development point to 68 DSP blocks while preserving accepted decode behavior.
  • Retired the temporary consecutive-P first-fault/timeout/arbiter diagnostic layer after root-cause localization and restored normal USER completion behavior.

Current supported development subset

  • Raw MPEG-2 Video elementary-stream input (.m2v).
  • Progressive frame pictures on the hardware-proven paths.
  • 4:2:0 chroma.
  • Continuous supported I-picture playback up to the established 720x480 diagnostic geometry.
  • Generalized P-picture regression coverage at 128x96 / 8x6 macroblocks, including signed forward motion, predictor reuse/reset, integer and half-sample interpolation, coded-block-pattern selection, sparse residual placement, quantiser changes, and consecutive reconstructed-P reference use.
  • Hardware-proven B-picture regression coverage at 128x96 using deterministic mixed I/P/B streams with forward, backward, and bidirectional prediction, internal macroblock skips, bounded residuals, and display reordering.
  • Two retained planar MiSTer DDR3 frame banks for I/P ping-pong/reference ownership plus a separate B scratch region.
  • Full 8-bit Y/Cb/Cr reconstruction.
  • Fixed 800x600 diagnostic video output.
  • Synthetic 33-bit / 90 kHz elementary-stream presentation timing metadata.

The P and B regression paths still have explicit engineering limits. These are implementation limits, not limits of ITU-T H.262 / ISO/IEC 13818-2.

Known limitations

The following remain outside the v0.4.0 supported development subset:

  • General arbitrary MPEG-2/H.262 P- and B-picture playback outside the hardware-proven regression envelope.
  • Interlaced frame/field-picture support and broader H.262 picture structures.
  • Chroma formats other than 4:2:0.
  • General MPEG-2 Program Stream (.mpg / .mpeg) demux and H.222.0 PES-derived timestamps.
  • Audio.
  • DVD/VOB navigation and direct optical-disc playback.
  • Removal of the current diagnostic geometry/resource caps.

Release qualification

The hardware-qualified RTL baseline is:

1370c28e3d34b1fd603c17130986bc336da29a32

The qualification build was made from a fresh clone of GitHub master using Quartus Prime 17.0.2 Lite for Cyclone V 5CSEBA6U23I7. Quartus Flow and Fitter completed successfully, the standard Phase 1P timing reports were reviewed, and setup endpoint TNS was zero.

Required MiSTer hardware regression:

  • test_p_consecutive_reference.m2v — PASS for 20 consecutive runs with normal USER acceptance.
  • test_b_mixed_gop.m2v — PASS.
  • test_b_core_decode.m2v — PASS.
  • test_p_general_decode.m2v — PASS.
  • test_all_i.m2v — PASS.

The release-documentation commits following 1370c28 change documentation only; the synthesized RTL qualified above is unchanged.

Quartus / timing

  • ALMs: 31,782 / 41,910 (76%)
  • Registers: 43,812
  • Block memory bits: 461,345 / 5,662,720 (8%)
  • RAM blocks: 73 / 553 (13%)
  • DSP blocks: 68 / 112 (61%)
  • PLLs: 3 / 6 (50%)
  • Global setup slack: +0.167 ns
  • Global hold slack: +0.248 ns
  • Global recovery slack: +4.117 ns
  • Global removal slack: +0.704 ns
  • Minimum pulse-width slack: +0.462 ns
  • Focused decoder setup: +1.311 ns, 0 / 100 violations
  • Focused video setup: +6.987 ns, 0 / 80 violations
  • Setup endpoint TNS: 0

TimeQuest continues to report the established incomplete external-I/O constraint warning class; the accepted qualification has positive reported setup/hold/recovery/removal slack and zero setup endpoint TNS.

MiSTer binary

The release binary follows the normal MiSTer date-coded naming convention:

MediaPlayer_20260816.rbf

The user-built binary attached to the GitHub release should be the hardware-qualified artifact corresponding to the 1370c28 RTL baseline.