GIGA Datasheet certification updates [PXCT-1363]

content/hardware/10.mega/boards/giga-r1-wifi/datasheet/datasheet.md

@@ -355,6 +355,12 @@ Exemptions : No exemptions are claimed.
 
 Arduino Boards are fully compliant with the related requirements of European Union Regulation (EC) 1907 /2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). We declare none of the SVHCs ([https://echa.europa.eu/web/guest/candidate-list-table](https://echa.europa.eu/web/guest/candidate-list-table)), the Candidate List of Substances of Very High Concern for authorization currently released by ECHA, is present in all products (and also package) in quantities totaling in a concentration equal or above 0.1%. To the best of our knowledge, we also declare that our products do not contain any of the substances listed on the "Authorization List" (Annex XIV of the REACH regulations) and Substances of Very High Concern (SVHC) in any significant amounts as specified by the Annex XVII of Candidate list published by ECHA (European Chemical Agency) 1907 /2006/EC.
 
+Hereby, Arduino S.r.l. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 201453/EU. This product is allowed to be used in all EU member states.
+
+| Frequency bands      | Maximum output power (ERP) |
+|----------------------|----------------------------|
+| 2.4 GHz, 40 channels | TBD                        |
+
 ## Conflict Minerals Declaration
 
 As a global supplier of electronic and electrical components, Arduino is aware of our obligations with regards to laws and regulations regarding Conflict Minerals, specifically the Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. Arduino does not directly source or process conflict minerals such as Tin, Tantalum, Tungsten, or Gold. Conflict minerals are contained in our products in the form of solder, or as a component in metal alloys. As part of our reasonable due diligence Arduino has contacted component suppliers within our supply chain to verify their continued compliance with the regulations. Based on the information received thus far we declare that our products contain Conflict Minerals sourced from conflict-free areas.
@@ -377,35 +383,42 @@ This device complies with part 15 of the FCC Rules. Operation is subject to the
 
 3. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
 
-English:
-User manuals for licence-exempt radio apparatus shall contain the following or equivalent notice in a conspicuous location in the user manual or alternatively on the device or both. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
+**Warning:**
+
+**Note:** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
+
+- Reorient or relocate the receiving antenna.  
+- Increase the separation between the equipment and receiver.  
+- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
+- Consult the dealer or an experienced radio/TV technician for help.  
+
+## ISED
+
+English: This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions:
 
 (1) this device may not cause interference
 
 (2) this device must accept any interference, including interference that may cause undesired operation of the device.
 
 French:
-Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
+Le présent appareil est conforme aux CNR ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
 
 (1) l’ appareil nedoit pas produire de brouillage
 
 (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
 
-**IC SAR Warning:**
+**Warning:**
 
-English
+English:
 This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
 
 French:
 Lors de l’ installation et de l’ exploitation de ce dispositif, la distance entre le radiateur et le corps est d ’au moins 20 cm.
 
-**Important:** The operating temperature of the EUT can’t exceed 85℃ and shouldn’t be lower than -40℃.
+Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. This Class B digital apparatus complies with Canadian ICES-003.  
 
-Hereby, Arduino S.r.l. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 201453/EU. This product is allowed to be used in all EU member states.
+Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
 
-| Frequency bands      | Maximum output power (ERP) |
-|----------------------|----------------------------|
-| 2.4 GHz, 40 channels | TBD                        |
 
 ## Company Information
 
@@ -432,3 +445,4 @@ Hereby, Arduino S.r.l. declares that this product is in compliance with essentia
 | 03/02/2023 | Release       |
 | 12/07/2023 | Pinout Update |
 | 25/04/2024 | Updated link to new Cloud Editor |
+| 17/09/2025 | Certification Updates |