Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add arilux lc06 support #1414

Closed
wants to merge 1 commit into from
Closed

Add arilux lc06 support #1414

wants to merge 1 commit into from

Conversation

zewelor
Copy link

@zewelor zewelor commented Dec 22, 2017

@HydrelioxGitHub
Copy link

Is it possible to do the same with LC03 ?

@zewelor
Copy link
Author

zewelor commented Dec 23, 2017

@HydrelioxGitHub I'm not an expert but I think it should work with lc01.

@HydrelioxGitHub
Copy link

It works except for the IR remote that does not work at all.

arendst added a commit that referenced this pull request Dec 25, 2017
@arendst
v5.10.0c
67d8fa0 
5.10.0c
 * Consolidate device serial (MH-Z19, SenseAir and Pzem004T)
into TasmotaSerial library
 * Consolidate PWM device recognition
 * Fix
Wemo Emulation (#1357)
 * Add support for Arilux LC06 (#1414)
@zewelor
Copy link
Author

zewelor commented Dec 26, 2017

Looks like its merged in newest version, Thanks. Here is pinout for future reference
lc06_pinout

@zewelor zewelor closed this Dec 26, 2017
@zewelor zewelor deleted the add_arilux_lc06_support branch December 27, 2017 09:03
arendst added a commit that referenced this pull request Jan 7, 2018
@arendst
v5.11.0
9c9a80f 
5.11.0 20180107
 * Minor webpage HTML optimizations (#1358)
 * Updated
German translation (#1438)
 * Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
 * Change ADS1115 default
voltage range from +/-2V to +/-6V (#1289)
 * Change text to Active for 3
minutes (#1364)
 * Change Wemo SetBinaryState to distinguish from
GetBinaryState (#1357)
 * Change output of HTTP command to valid JSON
and Array only (#1363)
 * Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (#1473)
 * Renamed
commands Color2,3,4 to Color3,4,5
 * Fix BME280 calculation (#1051)
 *
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (#1095, #1294)
 * Fix PWM initialization in
Dimmer/Color mode (#1321)
 * Fix Wemo Emulation (#1357)
 * Fix display
of build date and time in non-english locale (#1465)
 * Fix Wemo and Hue
emulation by adding M-Search response delay (#1486)
 * Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
 * Add command Color2 to set color while keeping
same dimmer value
 * Add device function pointers
 * Add support for
SenseAir S8 CO2 sensor
 * Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
 * Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
 * Add support for PZEM004T energy sensor
 * Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (#735)

* Add support for BME680 using adafruit libraries (#1212)
 * Add support
for MH-Z19(B) CO2 sensor (#561, #1248)
 * Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (#1291)
 * Add support for
TSL2561 using adafruit library (#661, #1311)
 * Add support for SHT3x
(#1314)
 * Add support for Arilux LC06 (#1414)
 * Add Italian language
file (#1449)
 * Add 2nd Gen Alexa support to Wemo emulation discovery
(#1357, #1450)
 * Add define for additional number of WS2812 schemes
(#1463)
joecotton pushed a commit to joecotton/Sonoff-Tasmota that referenced this pull request Jan 8, 2018
@arendst @joecotton
v5.11.0
6de4618 
5.11.0 20180107
 * Minor webpage HTML optimizations (arendst#1358)
 * Updated
German translation (arendst#1438)
 * Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
 * Change ADS1115 default
voltage range from +/-2V to +/-6V (arendst#1289)
 * Change text to Active for 3
minutes (arendst#1364)
 * Change Wemo SetBinaryState to distinguish from
GetBinaryState (arendst#1357)
 * Change output of HTTP command to valid JSON
and Array only (arendst#1363)
 * Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (arendst#1473)
 * Renamed
commands Color2,3,4 to Color3,4,5
 * Fix BME280 calculation (arendst#1051)
 *
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (arendst#1095, arendst#1294)
 * Fix PWM initialization in
Dimmer/Color mode (arendst#1321)
 * Fix Wemo Emulation (arendst#1357)
 * Fix display
of build date and time in non-english locale (arendst#1465)
 * Fix Wemo and Hue
emulation by adding M-Search response delay (arendst#1486)
 * Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
 * Add command Color2 to set color while keeping
same dimmer value
 * Add device function pointers
 * Add support for
SenseAir S8 CO2 sensor
 * Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
 * Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
 * Add support for PZEM004T energy sensor
 * Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (arendst#735)

* Add support for BME680 using adafruit libraries (arendst#1212)
 * Add support
for MH-Z19(B) CO2 sensor (arendst#561, arendst#1248)
 * Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (arendst#1291)
 * Add support for
TSL2561 using adafruit library (arendst#661, arendst#1311)
 * Add support for SHT3x
(arendst#1314)
 * Add support for Arilux LC06 (arendst#1414)
 * Add Italian language
file (arendst#1449)
 * Add 2nd Gen Alexa support to Wemo emulation discovery
(arendst#1357, arendst#1450)
 * Add define for additional number of WS2812 schemes
(arendst#1463)
@zewelor zewelor mentioned this pull request Mar 9, 2018
Closed
curzon01 pushed a commit to curzon01/Tasmota that referenced this pull request Sep 6, 2018
@arendst
v5.10.0c
b641cd7 
5.10.0c
 * Consolidate device serial (MH-Z19, SenseAir and Pzem004T)
into TasmotaSerial library
 * Consolidate PWM device recognition
 * Fix
Wemo Emulation (arendst#1357)
 * Add support for Arilux LC06 (arendst#1414)
@GerSant
Copy link

GerSant commented Apr 17, 2019

How can i configure the module for CW/WW support, only WW works for me.

My Module Config is:

Module Type: Airlux LC06 (40)
GPIO1 Serial Out: None (0)
GPIO2: PWM4 (40)
GPIO3: Serial In: None (0)
GPIO 4: None (0)
GPIO15: PWM5 (41)

Thanks in advance!!!

@fremut
Copy link

fremut commented Sep 11, 2019

GPIO05 ... CW, GPIO15 ... WW, GPIO13 ... B, GPIO12 ... G, GPIO14 ... R, GPIO02 ... onboard green status LED

@peterdey
Copy link

peterdey commented Jun 2, 2020

Posting here, because the best documentation for the LC06 / ZJ-ESPM-5CH-B board seems to be here. Please let me know if I should be writing this up somewhere else, and I'll happily delete this response.

You can reflash this board fine using the on-board power, but make sure you connect the V- pin to GND on your (FTDI) programmer.

I spent hours trying to figure out why I could see the boot messages, but none of the programmers (e.g. esptool.py, Tasmotizer, even Espressif's Flash Download Tool) could sync with the board on either Windows or Linux.

Christian Klippel's esptool yielded the most meaningful debugging messages for me to track this down.

Z:\XYZ\esptool-0.4.13-win32>esptool -cp COM6 -cb 115200 -bm dout -v -bz 1M -cf ..\tasmota.bin
esptool v0.4.13 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
setting flash mode from qio to dout
setting flash size from 512K to 1M
opening bootloader
resetting board
trying to connect
trying to connect
warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed

If you're seeing that "wrong direction/command" message, it might be because you need to connect V- to GND on your FTDI.

@ascillato
Copy link
Contributor

The documentation is on https://tasmota.github.io/docs/ and the information about templates and devices supported is on https://templates.blakadder.com/

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
6 participants
@zewelor @HydrelioxGitHub @GerSant @fremut @peterdey @ascillato