Itead Sonoff Touch

[tam481]

Hello, please add support for the newly released Sonoff Touch.

[Nayar]

Is it based on ESP8266 also?

+1 for Sonoff Touch

[arendst]

Send me the hardware and I will try to implement it

[danjperron]

Works well with the sonoff touch. The only thing I had to do was to set the esp8265 and gnd one pin momentary on power up.
https://dl.dropboxusercontent.com/u/48891705/touch1.png

[Slip7000]

Arendst please mail me your Address so I can ship them to you! Treid to load the Touch and not working.

[danjperron]

I got 4 sonoff touch installed. I'm still waiting for 2 others + 1 sonoff and one S20 smart socket.

Try to,

1 - Put the esp8265 to flash mode by shorting the pin like I show you on my previous post. Short the pin for 2 seconds on 3.3V power up.

2- Set the cpu to be esp8265.

3 - The switch is like the sonoff one.

B.T.W. I did use a esp12E with two relays and it works fine also. I did a video in french about it

https://youtu.be/T4XjFoNEUm8

This is my gig when I tried your code

I'm planing to do a video using a C.H.I.P. + sonoff + esp12E + mosquitto 1.4 QTT + paho.

Keep up the good work! I like what you did.

[arendst]

Great demo! In the meantime I received my Touch today and will also try my software on it in the very near future. According to the above information it should be a breeze...

[arendst]

Sonoff Touch support is fully implemented in version 3.1.1 just released.

See the wiki for specific compile and upload instructions.