Repository navigation
Releases
v0.5.3
Reverts a change from 0.5.2 that was causing excessive BUSY.
What's Changed
- Live constellation: end the preview when the lock is dropped silently by @arodland in #252
- Revert #234: BUSY on headerless Data2G bursts by @arodland in #270
- find_copy: cache pair products and keep the pilot fold running by @arodland in #271
- user guide: version 0.5.3 by @arodland in #272
Full Changelog: v0.5.2...v0.5.3
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (46 MB) | .zip (58 MB) |
| macOS (Apple Silicon) | .dmg (43 MB) | .tar.gz (39 MB) |
| macOS (Intel) | .dmg (46 MB) | .tar.gz (41 MB) |
| Linux (x86-64) | .AppImage (143 MB) | .tar.gz (157 MB) |
| Linux (arm64) | .AppImage (140 MB) | .tar.gz (154 MB) |
| Linux (32-bit ARM) | .AppImage (171 MB) | .tar.gz (186 MB) |
Other files:
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.5.2
- Better performance on weak fading paths. Sim numbers on the existing MPG/MPP profiles show 5-10% increases in throughput, and simulated polar conditions go from 0 bps to 50-100 bps throughput.
- A decoder bug fix makes FSK modes more reliable on fast fading.
- Shorter acknowledgments: acks are more likely to fit in one codeword instead of needing two, making turnarounds faster.
- Reliability improvements for nods.
- Raspberry Pi: decoding uses less CPU overall, and defaults to spreading out over all four cores to reduce latency.
- Multiple queued broadcast bursts can go out under a single PTT instead of keying the radio multiple times.
- Broadcast bursts are less likely to double another transmission. A burst that the modem can't lock on to for decode can still hold a broadcast until it finishes.
- An outgoing CONNECT is now canceled by DISCONNECT, instead of waiting for the connection to succeed and then disconnecting.
- Added CM108 PTT.
- Added the ability to be started by RMS Trimode (
data2g-gui TCPIP <host> <port>, like VARA). - Fixed building from source on Ubuntu 24.04.
What's Changed
- Hand timing: allow for each host's TX latency (#200) by @arodland in #201
- receive: the coarse CFO picks the pilot alias again (Python only bug) by @arodland in #213
- Nods on air: fixed window, answer a recovery at once, no nod behind an ID by @arodland in #217
- Transmit level: Android applies it live; cap at 0 dB by @arodland in #202
- FM channel simulator (FM plan M1) by @arodland in #203
- User's guide: stations must be tuned within 150 Hz of each other by @arodland in #219
- native: build with Qt 6.4 (Ubuntu 24.04) by @arodland in #223
- Add CM108 GPIO PTT (--ptt-method cm108) for CM108-based interfaces by @BoomerET in #221
- HAND OVERHEAR: a bystander's Hand window, any tag (#210) by @arodland in #225
- User's guide for 0.5.2 by @arodland in #226
- Android CI: cache Gradle's downloads by @arodland in #233
- After-session ID: wait out the peer's whole trailing ID by @arodland in #236
- KISS: queued bursts back to back on one PTT by @arodland in #235
- KISS bursts wait for Data2G bursts heard without a header by @arodland in #234
- T_REPLY only when it changes (T_KEEP): the usual OFDM ACK in one codeword by @jesseforkum in #231
- Pool default: every core up to 4, 4 up to 8, half above by @arodland in #237
- Search hop: less memory traffic (statistic over undecided starts, rows appended in cache) by @arodland in #238
- DD time pass in reduced-rank form by @arodland in #239
- Session binding: on_tx_end keeps the burst poll handed out by @arodland in #241
- gfldpc: GF(M) check update in double (#242) by @arodland in #243
- data2g-gui: the window opens where it was left by @jesseforkum in #248
- Severe fading: honest CPM spread, robust mode by spread, severe-aware outcome model by @arodland in #249
- DISCONNECT while dialing ends the dial by @arodland in #240
- Accept VARA's launch arguments, as RMS Trimode starts the modem by @jesseforkum in #245
- docs/speedtests: re-swept on master 95375ae (native) by @arodland in #250
- User's guide for 0.5.2: thread default, DISCONNECT while calling by @arodland in #251
New Contributors
- @BoomerET made their first contribution in #221
- @jesseforkum made their first contribution in #231
Full Changelog: v0.5.1...v0.5.2
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (46 MB) | .zip (58 MB) |
| macOS (Apple Silicon) | .dmg (43 MB) | .tar.gz (39 MB) |
| macOS (Intel) | .dmg (46 MB) | .tar.gz (41 MB) |
| Linux (x86-64) | .AppImage (143 MB) | .tar.gz (158 MB) |
| Linux (arm64) | .AppImage (140 MB) | .tar.gz (155 MB) |
| Linux (32-bit ARM) | .AppImage (172 MB) | .tar.gz (186 MB) |
Other files:
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.5.1
Small changes. Adds a 32-bit ARM Linux (Raspberry Pi build), fixes a crash for some Windows users, and tidies up compiler warnings.
The only functional change is an improvement to the MODES response so that Ragtime can load its gear shifter data directly from Data2G over the network, and won't have to prompt you for mode_thresholds.json anymore.
What's Changed
- data2g-web: list its own flags in --help by @arodland in #189
- Bundle the MSVC runtime in the Windows package by @arodland in #193
- MODES: report mode thresholds (CHANNELS + THRESHOLD lines) by @arodland in #186
- CI: armhf (32-bit Raspberry Pi) build by @arodland in #192
- docs/releasing.md: release chores and a user's guide recipe by @arodland in #194
- User's guide for 0.5.1 by @arodland in #196
- native: clear -Wmissing-field-initializers (#197) by @arodland in #198
Full Changelog: v0.5.0...v0.5.1
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (46 MB) | .zip (58 MB) |
| macOS (Apple Silicon) | .dmg (43 MB) | .tar.gz (39 MB) |
| macOS (Intel) | .dmg (45 MB) | .tar.gz (41 MB) |
| Linux (x86-64) | .AppImage (141 MB) | .tar.gz (155 MB) |
| Linux (arm64) | .AppImage (138 MB) | .tar.gz (152 MB) |
| Linux (32-bit ARM) | .AppImage (170 MB) | .tar.gz (184 MB) |
Other files:
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.5.0
Some quality-of-life improvements (unified settings between GUI, web, and headless; scrollable settings dialog for small monitors; changing settings in GUI or web doesn't restart the modem unless it has to).
Some robustness improvements at low SNR: coherent detection for FSK modes, and "nods" which are short robust acks or nacks that take less time than a full FSK control message. Nods are experimental and rely on a consistent round-trip delay on both ends of a connection, so if they cause problems for you, turn them off in the settings and file a report in GitHub Issues.
And there's an Android version of the TNC which is currently experimental and not available in app stores. Anyone who is interested in using it, and especially anyone who is interested in developing mobile apps using Data2G, should join the Discord and express their interest so that we can get a testing group going.
What's Changed
- Monitor: read what the session read, one decode per burst by @arodland in #167
- Monitor: show sessions it joined late, read new sessions' resends by @arodland in #166
- test_tci: warm the TLS backend before the timed TCI waits by @arodland in #171
- native tests: clear GCC 16 warnings by @arodland in #168
- Broadcast: keep a burst's frames when a later control codeword fails by @arodland in #156
- CI: Android APK builds, signed AAB to Google Play on release by @arodland in #169
- Hand bursts: show-of-hands primitives for net check-ins by @arodland in #146
- CPM: coherent detection (DD decoding, coherent control and header lock) by @arodland in #172
- Settings: apply live where possible, warn before a restart by @arodland in #175
- gui: settings pages scroll to fit small screens by @arodland in #176
- Android TNC app by @arodland in #142
- host: PENDING / CANCELPENDING on a possible CONNECT header (--pending) by @arodland in #180
- host: RETRIES [n] sets the CONNECT retries for this client's connects by @arodland in #181
- One config file for data2g-gui, data2g-web and data2g-host by @arodland in #182
- Package data2g-web in every installer by @arodland in #183
- Nods: keyed CPM replies detected in the reply slot (T_NODS) by @arodland in #174
- license: interface exception to Artistic 2.0 section 8 by @arodland in #178
- User's guide for 0.5.0 by @arodland in #184
Full Changelog: v0.4.3...v0.5.0
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (45 MB) | .zip (57 MB) |
| macOS (Apple Silicon) | .dmg (43 MB) | .tar.gz (39 MB) |
| macOS (Intel) | .dmg (45 MB) | .tar.gz (41 MB) |
| Linux (x86-64) | .AppImage (141 MB) | .tar.gz (155 MB) |
| Linux (arm64) | .AppImage (138 MB) | .tar.gz (152 MB) |
Other files:
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.4.3
Several small correctness fixes around CWID detection and burst detection. Fewer false locks, false-locks released sooner, and as a bonus, slightly better sensitivity for all OFDM bursts.
A protocol compatibility issue on locales that use comma for decimal separator is fixed.
Also, a web UI (data2g-web) is added. Consider it experimental, but give it a try.
What's Changed
- GUI: waterfall fps on right-click by @arodland in #148
- CwSense: hits must be keyed (2+ runs, none over 320 ms) by @arodland in #150
- Receiver: let go of a suspect lock whose pilots stay dark for 3 s by @arodland in #151
- Frame pilots must match the pilot pattern, not just repeat by @arodland in #152
- ARQ: a resend after a lost reply takes the next RV by @arodland in #154
- Policy: the expected reply follows what the peer sent last by @arodland in #155
- CPM: a second look at an early lock by @arodland in #157
- Docs: the abandon's reset flag and T_RESYNC are deprecated by @arodland in #160
- Engine: another station's burst is not the peer's lost control by @arodland in #158
- ARQ: a failed control is combined with the failed ones before it by @arodland in #159
- find_copy: a copy lock's pilots must keep the pilot's pattern by @arodland in #161
- Bindings: PyPolicy forwards observe_energy and expected_reply by @arodland in #163
- docs/speedtests: the release sweep recipe; speed_sweep.sh runs native by @arodland in #162
- data2g-web: headless station with a web UI by @arodland in #149
- Host, GUI: C numeric locale for protocol numbers by @arodland in #164
Full Changelog: v0.4.2...v0.4.3
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (39 MB) | .zip (53 MB) |
| macOS (Apple Silicon) | .dmg (39 MB) | .tar.gz (35 MB) |
| macOS (Intel) | .dmg (41 MB) | .tar.gz (37 MB) |
| Linux (x86-64) | .AppImage (112 MB) | .tar.gz (123 MB) |
| Linux (arm64) | .AppImage (110 MB) | .tar.gz (121 MB) |
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.4.2
What's Changed
- Sync: noise level robust to non-white noise (FM false locks) by @arodland in #143
- KISS: SetHardware sets a port's mode by @arodland in #144
- CW ID outside sessions: at most one per 9 min, forced at 10 by @arodland in #145
Full Changelog: v0.4.1...v0.4.2
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (39 MB) | .zip (53 MB) |
| macOS (Apple Silicon) | .dmg (39 MB) | .tar.gz (35 MB) |
| macOS (Intel) | .dmg (41 MB) | .tar.gz (37 MB) |
| Linux (x86-64) | .AppImage (112 MB) | .tar.gz (122 MB) |
| Linux (arm64) | .AppImage (109 MB) | .tar.gz (120 MB) |
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.4.1
What's Changed
- CPM constellation: tone wheel by @arodland in #140
- Rig: reconnect once when a rig call hits a dead socket by @arodland in #141
- native: TCI as an alternative to sound card + Hamlib by @arodland in #139
Full Changelog: v0.4.0...v0.4.1
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (39 MB) | .zip (53 MB) |
| macOS (Apple Silicon) | .dmg (39 MB) | .tar.gz (35 MB) |
| macOS (Intel) | .dmg (41 MB) | .tar.gz (37 MB) |
| Linux (x86-64) | .AppImage (111 MB) | .tar.gz (122 MB) |
| Linux (arm64) | .AppImage (109 MB) | .tar.gz (120 MB) |
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.4.0 -- now with a supply of extra ions for your operating pleasure
A handful of bugfixes and usability improvements, but more importantly we were contacted by N0JLF who agreed to share some nifty features from Ion with us. These include GF(M) LDPC codes for the FSK modes in place of binary LDPC, maximum-likelihood retiming for the FSK modes, and "primed reception" of expected replies. All of these significantly lower the SNR floor that Data2G is usable through. It may not move large amounts of data quickly at -15dB, but it's much more likely to hold a connection with fewer retries.
In addition, the inline data change and the elimination of 160ms of totally unnecessary padding have increased the snappiness of short chat turnarounds.
What's Changed
- DATA2G ON: DISCONNECTED reasons, TXPOWER, TIMEOUT by @arodland in #122
- Hamlib: CAT PTT through rigctld; one-line error text by @arodland in #124
- CPM acquisition: tone-LLR lock gates, likelihood retiming by @arodland in #125
- CPM data on a GF(M) LDPC, on the acquisition fix (protocol 14) by @arodland in #126
- Outcome model retrained for the new CPM receiver (cordf) by @arodland in #127
- ARQ: carry a write's last codeword in the control's padding (T_INLINE) by @arodland in #129
- Protocol 15: 20 ms burst lead-in/out, not 100 ms by @arodland in #130
- pytest: xdist workers, less repeated work (394 s -> about 60 s) by @arodland in #132
- CW ID (heard and held for) and an over-the-air sounding tool by @arodland in #134
- Primed reception: control priors, primed connect frames, CPM expected slot by @arodland in #135
- Outcome model under primed reception: data and retrain (not shipped) by @arodland in #136
Full Changelog: v0.3.0...v0.4.0
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (39 MB) | .zip (53 MB) |
| macOS (Apple Silicon) | .dmg (39 MB) | .tar.gz (35 MB) |
| macOS (Intel) | .dmg (41 MB) | .tar.gz (37 MB) |
| Linux (x86-64) | .AppImage (111 MB) | .tar.gz (121 MB) |
| Linux (arm64) | .AppImage (109 MB) | .tar.gz (119 MB) |
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.3.0
Another compatibility break, but I'm getting them out of the way so that hopefully there aren't more any time soon.
- The fsk8r50 mode had a poorly-designed preamble that caused a completely unnecessary level of false locks, and the solution was to replace it, making everything more reliable.
- Broadcast mode's framing is improved so that a lost codeword doesn't break encoding everything after it. If you pack a bunch of KISS frames into a burst they will decode or fail to decode more or less independently — completely independently if you use the MODES info to fit them to the codeword size. Duplicate control is also available for broadcast mode if the client wants it.
This is the first time I've actually bumped the protocol version; TNCs with mismatching versions will reject connection requests from each other, and broadcast packets will fail to decode. When we get to the point of having genuinely stable releases, there will probably be "frozen" protocol versions that will continue decoding in later releases even if there is a change, but right now is still beta days.
The other change is twofold: adding the CLEANTXBUFFER command that VarAC uses, and adding a much better version of CLEANTXBUFFER for Ragtime to use.
What's Changed
- Receiver: a CPM lock replaces a suspect OFDM header while it is pending by @arodland in #117
- CPM: a non-periodic c8r50 front (protocol 13); keep waiting CPM fronts through a suspect burst's trim by @arodland in #119
- Host: CLEANTXBUFFER, and DATA2G ON|OFF for Data2G-aware clients by @arodland in #118
- CLEANTXBUFFER: settle at the ACK and hold the next burst for a write by @arodland in #120
Full Changelog: v0.2.0...v0.3.0
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (39 MB) | .zip (52 MB) |
| macOS (Apple Silicon) | .dmg (39 MB) | .tar.gz (35 MB) |
| macOS (Intel) | .dmg (41 MB) | .tar.gz (37 MB) |
| Linux (x86-64) | .AppImage (108 MB) | .tar.gz (118 MB) |
| Linux (arm64) | .AppImage (106 MB) | .tar.gz (116 MB) |
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.
v0.2.0
Only one day since 0.1.0 and we've got a compatibility-breaking release, but it's for a good cause. Along with some CPU usage reductions, we have a bug fix that makes the slowest FSK modes 8-9% faster and more reliable at the same time.
Users running v0.1.0 will fail to decode FSK bursts from users runnning v0.2.0 and vice versa, so please update.
What's Changed
- ldpc: single-precision phi by default by @arodland in #106
- RX hot paths: parallel soft bits, vectorized exp, per-slot blind pass, Cholesky refine by @arodland in #107
- LDPC: layered sum-product decoding, decoder effort setting (default 25) by @arodland in #108
- Carrier-sense a missed reply before polling over it by @arodland in #109
- CPM: lock on both header copies when the first faded by @arodland in #110
- CPM: one mid sync block, and a lock from it when the front is missed by @arodland in #111
- docs/speedtests: -5 dB CPM cells after #110/#111 by @arodland in #113
- Release workflow runs bump_version.sh by @arodland in #114
Full Changelog: v0.1.0...v0.2.0
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows (64-bit) | Setup .exe (39 MB) | .zip (52 MB) |
| macOS (Apple Silicon) | .dmg (39 MB) | .tar.gz (35 MB) |
| macOS (Intel) | .dmg (41 MB) | .tar.gz (37 MB) |
| Linux (x86-64) | .AppImage (107 MB) | .tar.gz (117 MB) |
| Linux (arm64) | .AppImage (105 MB) | .tar.gz (115 MB) |
The installer is the easy path; the portable archive needs no administrator and runs from a stick.
macOS builds are signed with a Developer ID and notarized by Apple. Windows builds are signed with Azure Trusted Signing — SmartScreen may still warn on the first downloads until the certificate earns a reputation; choose More info → Run anyway.