Skip to content

Releases

Wildlife Network Base 0.2.2

Choose a tag to compare

@github-actions github-actions released this 20 Nov 18:55

SD card image for the Wildlife Network Base, version 0.2.2. Write it with Raspberry Pi Imager (Use custom), and check it against the .sha256 file first. Setup guide: https://wlnw.org/help/site/base

What's new since 0.2.1

  • Local time from the location. When you save the Base's location (setup page, BirdEcho, or POST /api/config), it looks up the time zone for those coordinates without needing internet, sets the system clock's time zone and restarts BirdNET-Go with it. Detections in BirdNET-Go's page, the BirdEcho Feed and Studio now show local time instead of UTC (for example India Standard Time for a Base in Chennai).
  • Bases already set up switch to their location's time zone at their next start, without running setup again.
  • Choose a time zone yourself if the looked-up one is wrong for you: the Time zone field under Advanced in Setup, a timezone field in POST /api/config, a wildnetwork-timezone.txt file on the SD card (write auto to go back to the location's zone), or timezone under [base] in /etc/wnbase/wnbase.ini. A chosen zone always wins.
  • Shown in /api/info (timezone) and on the dashboard.
  • Upload times stay correct. Detections sent to Wildlife Network are still true UTC times; nothing shifts, is sent twice or is skipped at the moment of the switch (wdx-agent 0.4.6, which also handles older BirdNET-Go databases that store local clock time).
  • Reinstalling or updating the Base no longer resets its time zone to UTC.

Note: the Base checks its time zone at every start, so a zone set by hand with timedatectl is replaced; use one of the options above instead.

Still in testing: field reports welcome as GitHub issues.

Wildlife Network Base 0.2.1

Choose a tag to compare

@github-actions github-actions released this 20 Nov 15:53

SD card image for the Wildlife Network Base, version 0.2.1. Write it with Raspberry Pi Imager (Use custom), check it against the .sha256 file first. Setup guide: https://wlnw.org/help/site/base

What's new since 0.2.0

  • Home Wi-Fi first, hotspot only as a fallback. After a start the Base gives home Wi-Fi up to 90 seconds before it opens its own Wi-Fi, and a router restart no longer pushes it into hotspot mode (it waits 3 minutes). In hotspot mode it retries home Wi-Fi every 5 minutes, but not while a phone is connected for setup.
  • One home Wi-Fi profile: saving Wi-Fi in setup switches older profiles off (including the one Raspberry Pi Imager makes), so the Base no longer flips between networks.
  • Wi-Fi from the SD card: put a wildnetwork-wifi.txt file on the card and the Base joins that network at start, then deletes the file so the password does not stay on the card.
  • Logs are kept across reboots and power cuts (up to 200 MB), which makes field problems easier to look into.
  • /api/info reports deploymentId, the id Wildlife Network files the Base's detections under. BirdEcho 0.16 uses it to show the Base's Feed from Wildlife Network when the phone is not on the Base's Wi-Fi.
  • wdx-agent 0.4.5: an hourly summary of what was sent in the log, and a retry within a minute when the network comes back.

Still in testing: field reports welcome as GitHub issues.

v0.2.0

Choose a tag to compare

@github-actions github-actions released this 18 Nov 21:27
Version 0.2.0

WildNetwork Base image 0.1.0 beta 1

Pre-release

Choose a tag to compare

@arunrajiah arunrajiah released this 08 Oct 21:02

First ready-to-flash SD card image for the WildNetwork Base. Beta: not yet tested on real hardware. It has been built and checked in CI and in a Debian container only. The first boot, the Wi-Fi hotspot, 4G modems and the microphone inside BirdNET-Go's container have not been tried on a Raspberry Pi. If you flash it, please report what happens in an issue, including what the dashboard shows.

What is on the card:

  • Raspberry Pi OS Lite (Debian 13, 64-bit) for Raspberry Pi 4 and 5
  • BirdNET-Go 20260823, included so the first boot needs no internet
  • wnbase 0.1.0 (dashboard, setup page, local API), wdx-agent 0.3.1
  • Wi-Fi hotspot WildNetwork-XXXX with a per-device password; setup code on the boot partition in wildnetwork-setup.txt
  • SSH off unless you add wildnetwork-ssh.pub to the boot partition; no default passwords

How to use it: see Flash an SD card and the hardware guide.

The image file (.img.xz, about 1.2 GB) is attached by the build workflow a short while after this release appears.