CI status

Introduction

CCWS is a development environment for ROS, which integrates functionality of traditional catkin workspaces and CI pipelines in order to facilitate (cross-)compilation, testing, linting, documetation and binary package generation. It is intended to be used both as a CI/CD backbone and a working environment for developers. Note that CCWS is not intended to be a complete solution, but rather a basis for development of a vendor-specific workflow.

CCWS is meant to be ROS version agnostic, but is mainly tested with ROS1. There are also some technical issues wth ROS2 packages that must be resolved, e.g., ament/google_benchmark_vendor#17.

Features

• Build profiles -- sets of configurations for build process, e.g., cmake toolchain, colcon configuration, environment variables, etc. Profiles do not conflict with each other and can be used in parallel without using separate clones of the workspace and packages.

• Execution profiles -- simple shell mixins that are intended to modify run time environment, e.g., execute nodes in valgrind, alter node crash handling, etc.

• A number of features implemented via build profiles:

  • Cross compilation to several common platforms.

  • Documentation generation for the whole workspace or selected packages using doxygen, similar to https://github.com/mikepurvis/catkin_tools_document.

  • Linting with clang-tidy and scan_build.

  • Various static checks as in https://github.com/sscpac/statick, in particular:

    • cppcheck
    • catkin_lint https://github.com/fkie/catkin_lint
    • yamllint
    • shellcheck

  • Binary debian package generation.

• Package template which demonstrates how to use some of the features.

• The number of parallel jobs can be selected based on available RAM instead of CPU cores, since RAM is likely to be the limiting factor.

• Based entirely on make and shell scripts. All scripts and configurations are kept in the workspace and easy to adjust for specific needs.

Build profiles

Profile configurations are located in profiles/build, common subdirectory contains default parameters, which can be overriden by specific profiles:

• [default] reldebug -- default compiler, cmake build type is RelWithDebInfo
• scan_build -- static checks with scan_build and clang-tidy. clang-tidy parameters are defined in cmake toolchain and must be enabled in packages as shown in package template CMakeLists. This profile also uses clang compiler.
• thread_sanitizer -- compilation with thread sanitizer.
• addr_undef_sanitizers -- compilation with address and undefined behavior sanitizers.
• static_checkers -- static checkers and their configuration.
• doxygen -- doxygen and its configuration.
• cross_raspberry_pi -- cross-compilation for Raspberry Pi.
• cross_jetson_xavier -- cross-compilation for Jetson Xavier.
• cross_jetson_nano -- cross-compilation for Jetson Nano.
• clangd -- collects compilation commands for a given BASE_BUILD_PROFILE and generates clangd configuration file in the workspace root.

Execution profiles

Execution profiles set environment variables that can be used in launch scripts to alter run time behavior as demonstrated in pkg_template/catkin/launch/bringup.launch, currently available profiles are:

• common -- a set of common ROS parameters, e.g., ROS_HOME, it is automatically included in binary packages.
• test -- sets CCWS_NODE_CRASH_ACTION variable so that nodes that respect it become required, i.e., termination of such nodes would result in crash of test scripts and can thus be easily detected.
• valgrind -- sets CCWS_NODE_LAUNCH_PREFIX to valgrind and some variables that control behavior of valgrind.
• core_pattern -- sets core pattern to save core files in the artifacts directory.
• address_sanitizer -- helper for addr_undef_sanitizers profile.

Execution profiles have no effect on build process and are taken into account in *test* targets or debian packages. test execution profile is always used in tests and additional profiles can be provided with EXEC_PROFILE="<profile1> <profile2>". These targets load profiles using setup.bash script located in the root folder of CCWS, which can also be used manually, e.g., source setup.bash [<build_profile> [<exec_profile1> ...]]. Note that the setup script always includes common profile, and uses test execution profile if no other execution profiles are specified.

Dependencies

Dependencies can be installed using make bp_install_build BUILD_PROFILE=<profile>, which is going to install the following tools and profile specific dependencies:

• colcon
• yq -- https://github.com/asherikov/wshandler dependency
• cmake
• ccache -- can be disabled in cmake toolchains
• wget

Usage

See .ccws/test_main.mk for command usage hints.

Initial setup

• Override developer and vendor specific parameters by adding them to make/config.mk, available parameters can be found in the top section of Makefile.
• Install dependencies using make bp_install_build BUILD_PROFILE=<profile> targets, cross compilation profiles would require some extra steps as described below. In some minimalistic environments you may need to run ./scripts/bootstrap.sh before using bp_install_build target in order to install make and other utils.
• Clone packages in src subdirectory, or create new using make new PKG=<pkg>.

Compilation

• make build PKG="<pkg>" where <pkg> is one or more space separated package names.
• make <pkg> -- a shortcut for make build, but <pkg> can be a substring of package name. All packages matching the given substring will be built.
• The number of jobs can be overriden with JOBS=X parameter.
• make build PKG=<pkg> BUILD_PROFILE=scan_build overrides default profile.

Running

• Source setup.bash <profile> to be able to use packages. Setup scripts generated by colcon can also be used directly, e.g., install/<profile>/local_setup.sh, but in this case some of CCWS functionality won't be available.

Testing

• make test PKG=<pkg> test with colcon, or make wstest to test all.
• make ctest PKG=<pkg> bypass colcon and run ctest directly or make wsctest to test all.

Documentation

• make BUILD_PROFILE=doxygen, firefox artifacts/doxygen/index.html

Debian package generation

Overview

CCWS takes a somewhat uncommon approach to binary package generation which is a middle ground between traditional ROS (1 package = 1 deb) and docker containers: all packages built in the workspace are packed together into a single debian 'superpackage'. Unlike bloom CCWS generates binary packages directly instead of generating source packages first.

Binary package generation is implemented as a build profile mixin that can be overlayed over an arbitrary build profile: make <pkg> BUILD_PROFILE=deb BASE_BUILD_PROFILE=reldebug.

CCWS approach has a number of advantages:

• Binary compatibility issues are minimized compared to traditional ROS approach:

  • no need to worry about compatibilities between multiple standalone binary packages and perform ABI checks;

  • if base ROS packages are included, it is also possible to avoid binary incompatibilities between syncs of the same ROS release (those actually happen).

• Package repository management can be sloppier compared to ROS when it comes to tags, versions, git submodules, etc, e.g., there is no need to maintain release repos for all packages.

• Debian 'superpackages' are easier to handle than both standalone packages and docker containers, e.g., they can be generated by developers from their working branches and easily copied and installed on the target.

• Debian packages have some advantages over docker containers in general:

  • Zero overhead during execution.

  • Straightforward access to hardware.

  • Easy installation of system services, udev rules, configs, etc.

• Different versions of binary packages can be installed simultaneously, if they are built using different VERSION parameters.

Building packages

Generally, it is necessary to install packages to the filesystem root during compilation in order to get all paths right in catkin cmake files and properly install system files. CCWS avoids this using proot similarly to cross-compilation profiles.

Cross-compilation

Here <profile> stands for cross_raspberry_pi, cross_jetson_xavier, cross_jetson_nano. Cross-compilation make targets can be found in make/cross.mk and profiles/<profile>/targets.mk

Note on cross_jetson_xavier and cross_jetson_nano: these profiles require Ubuntu 18.04 / ROS melodic and install nvcc, you may want to do this in a container.

The general workflow is documented below, for more technical details see doc/cross-compilation.md and CCWS CI test in .ccws/test_cross.mk:

1. Install profile dependencies with make bp_install_build BUILD_PROFILE=<profile>
2. Obtain system image:
   • cross_raspberry_pi -- bp_install_build target automatically downloads standard image;
   • cross_jetson_xavier, cross_jetson_nano -- CCWS does not obtain these images automatically, you have to manualy copy system partition image to profiles/cross_jetson_xavier/system.img.
3. Initialize source repositories:
   • make wsinit REPOS="https://github.com/asherikov/staticoma.git"
   • [when building all ROS packages] add ROS dependencies of all your packages to the workspace make dep_to_repolist ROS_DISTRO=melodic, or a specific package make dep_to_repolist PKG=<pkg> ROS_DISTRO=melodic;
   • fetch all packages make wsupdate.
4. Install system dependencies of packages in your workspace to the system image: make cross_install PKG=staticoma BUILD_PROFILE=<profile> ROS_DISTRO=<distro>
5. Compile packages:
   • mount sysroot with make cross_mount BUILD_PROFILE=<profile>
   • build packages, e.g. make staticoma BUILD_PROFILE=<profile> or build and generate deb package make deb PKG=staticoma BUILD_PROFILE=<profile>
   • unmount sysroot when done with make cross_umount BUILD_PROFILE=<profile>

Extending CCWS

CCWS functionality can be extended in multiple ways:

• by adding new build profiles, e.g., make bp_new BUILD_PROFILE=vendor_static_checks BASE_BUILD_PROFILE=static_checks, all profiles starting with vendor prefix are ignored by git;
• by adding execution profiles;
• make targets can be added by creating a profiles/build/vendor/<filename>.mk file;
• common cmake toolchain suffix can be added to profiles/build/vendor/toolchain_suffix.cmake.

show_vendor_files target can be used to list all vendor specific files.

Related software

• https://github.com/ros-industrial/industrial_ci -- ROS specific CI scripts, noninteractive, "one-shot" design, no sanitizers, emulated cross compilation.
• https://github.com/ros-tooling/cross_compile/ -- emulated cross compilation for ROS and ROS2.
• https://github.com/HesselM/rpicross_notes -- cross compilation for Raspberry Pi done in a different way.
• https://github.com/ros-tooling/action-ros-ci -- github action that covers some of CCWS functionality.

TODO

• Replace ccache with https://github.com/mbitsnbites/buildcache.
• Integrate https://github.com/oclint/oclint
• https://github.com/ejfitzgerald/clang-tidy-cache or https://github.com/mbitsnbites/buildcache can be used to cache clang-tidy runs.
• https://github.com/mrtazz/checkmake might be useful for makefile linting.
• Cache cmake checks with https://github.com/cristianadam/cmake-checks-cache, https://github.com/polysquare/cmake-forward-cache might be useful too.
• Shell formatter https://github.com/mvdan/sh.
• https://github.com/myint/cppclean might be useful for unnecessary header detection, but looks stale.
• https://github.com/include-what-you-use/include-what-you-use
• Build time analysis with clang https://github.com/aras-p/ClangBuildAnalyzer and / or https://github.com/jrmadsen/compile-time-perf.
• Potential replacement for scan_build https://github.com/Ericsson/codechecker with extra checks and caching.
• https://github.com/sscpac/statick is not going to be used, but some of its linters can be integrated.
• Source code spellcheck https://github.com/myint/scspell.
• https://github.com/jordansissel/fpm -- generic binary package generator, potential replacement for dpkg-deb.
• https://github.com/git-afsantos/haros -- ROS-aware static analysis, might have issues with non catkin_make build environments.
• https://github.com/Tencent/TscanCode -- C++ static analysis tool.
• https://github.com/DLu/roscompile/tree/main/roscompile -- linter for catkin packages.
• Use https://libguestfs.org/ or https://github.com/alperakcan/fuse-ext2 instead of loop devices, to avoid using sudo. There are some issues in Ubuntu though, bug 759725, see https://libguestfs.org/guestfs-faq.1.html. guestfs is too slow to be practical.
• Distributed compilation support with https://github.com/distcc/distcc can be useful.
• Add memory sanitizer profile as an alternative to valgrind, gcc doesn't support it currently.
• Add code coverage profile.
• Execution profile with https://github.com/yugr/libdebugme to automatically start debugger on a signal.
• https://github.com/yugr/valgrind-preload as an alternative to valgrind execution profile -- an overkill in general case though.
• Control symbol visibility and verify with https://github.com/yugr/ShlibVisibilityChecker.
• Add CodeQL profile (https://github.com/github/codeql).

FAQ

• Console output does not show compilation commands: make sure that colcon-output is not installed.