Repository navigation
Atomik Rack v0.3.0-rc.2
Pre-release
Pre-release
·
1073 commits
to main
since this release
Added
- Recording and editing follow-ups: dimmed masked notes and tails, a Piano Keys window, a Save question in its
own words, fades in ticks and sparse edits of large clips. The piano roll dims what the open clip does not
play: the notes (or parts of notes) under a later clip of the same lane, and the tail of a note that runs past
the end of the clip, which is still drawn so it can be seen and trimmed; a clip with a loop, a muted clip and a
take are not dimmed for the lane's overlap rule. View > Piano Keys (F4) now opens a floating window of its own
(it moves, resizes and can sit on another monitor), the window's geometry and whether it was open are remembered
with the other windows, and so are the strip's octave and velocity (ui-state.jsonpiano_keys_octave,
piano_keys_velocity); the main window's lower panes no longer give up room to a strip. The window is named
piano-keysfor the MCP session tools and--detach-style options. The question about unsaved changes has
the buttons Save, Don't Save and Cancel on every platform: a task dialog with those words on Windows (which
needs a manifest asking for Common Controls version 6, now embedded in the app and the MCP server), the native
alert on macOS and the zenity question on Linux. The clip inspector's FADE IN and FADE OUT show a small unit
tag, MS or TICKS: a click on it switches both fades between milliseconds and ticks of the clip's own span (a
wheel notch or a typed value is then a 16th note or a number of ticks; the file keeps frames). A change of
the note list of a large clip that keeps its length and touches at most an eighth of the notes (an inspector
step on a selection, a transpose, a velocity or length change) is stored in the undo history as the changed
notes only, so a long run of inspector steps on a clip of tens of thousands of notes no longer fills the history
with copies of the whole list. No saved field changes (the project format stays 43). Deferred: the dimming of
the masked parts of a looped clip, and remembering the fade unit between sessions. - Automation lane and gesture follow-ups: a static value handle, a time range on a lane, Extend to Next and Previous
Clip, no note audition, trimming several audio clips and remembered snap. An automation lane that holds a static
value draws it as a line across the lane with a square handle at the left edge of the timeline; dragging the handle
sets the value from the pointer height (on the scale of the lane's points) and one drag is one undo step, Esc puts
the value back. Dragging on a lane with the new Lane range select role (Alt+Shift, Opt+Shift on macOS; remappable in
Settings, Keyboard) shades a time range, snapped to the grid: Copy takes the parts of the lane's clips inside it, Cut
and Delete remove them (the clips are cut at the range edges, one undo step) and Paste puts the copy at the
playhead on the range's lane; any other press or Esc forgets the range. Extend to Next Clip and Extend to Previous
Clip (sequencer.extend_to_next_clip,sequencer.extend_to_previous_clip, in the clip menu) grow the selected note
and automation clips to the start of the next clip on their lane or back to the end of the previous one, the content
staying where it is in song time, in one undo step; audio clips are left alone. Audition Notes in the notes menu of
the piano roll (editor.audition_toggle) stops notes from sounding while they are drawn, moved or stepped to (the key
strip still plays) and is remembered. Dragging the start edge of a selected audio clip trims every selected audio
clip by the same distance, each as far as its own file allows. The snap resolution of the arrangement and of the
piano roll and the snap mode (grid lines or whole steps) are saved in the window state file and restored at start.
SetLaneStaticgained an optional merge id. The project format stays 43. - Looped clip and note lane follow-ups: looped audio takes, an audio loop converted into one clip, and a solo and a
colour for each note lane. A take of a group can loop now, audio included: the take menu offers Loop Take x2, x4
and x8 and Play Take Once (SetTakeLoop), the take runs that many repetitions of its extent and the comp segments
that ended at its end run on with it. A looped note take stays a looped clip; a looped audio take compiles to one
clip per repetition, each restarting the source with its own fades and warp, so the lane plays what the looped
take played, and a comp cut inside a repetition fades like a cut in any audio take. Convert Loop > To a Single Clip
now works on audio: the looped clip is rendered on the freeze worker as the track plays it (gain, fades, envelope
and warp, before the insert effects and the channel strip) and the clip becomes one plain clip of that render with
the same place, name and colour, in one undo step (the status line shows the render's progress; looped note and
automation clips among the selected ones convert at once as before). A note lane has an S button beside M on its
header (the first lane's chip has no room: use Solo Lane in the track header menu,sequencer.toggle_lane_solo):
while a lane is soloed only the soloed lanes of the track play, in the engine, the bounce, a freeze and the lane
merge alike, a mute still silences a soloed lane, and the clips of the other lanes are drawn like a muted lane's.
A Lane Colour submenu (sequencer.lane_color, a palette name ortrack) colours a lane's clips and header bar; a
clip's own colour still wins. Both are saved as the optional"solo"and"color"fields of a notes lane, written
only when set and ignorable by an older reader, andproject_inspectlists them. Bouncing chosen clips in place
ignores a solo on another lane. Recording to several lanes at once is not done yet (a take still goes to the one
selected lane). The project format stays 43. - Rack editing follow-ups: "+" handles, a Create submenu, unfolding under a cable and replacing a device by
dropping a library item. Resting the pointer on the seam between two devices of a rack column, or at the top or
foot of a column, shows a small "+": pressing it opens the device browser (titled INSERT DEVICE) and the row
chosen, with Enter or a double click, is added at that slot, wired as a device dropped there is; Esc cancels. The
rack and device context menus keep Create Instrument, Create Effect and Create Player in one Create submenu.
A cable dragged over a folded device unfolds it after 0.7 seconds of rest, so a jack on its back can be reached
(an ordinary fold edit, and the cable drag goes on over the new layout). A device row or a one-device patch from
the library dropped on the middle of a device of the same kind, or on a track header, replaces that device in
place as one undo step, routed like the browser's replace: the track, clips, channel and the cables that fit
stay, the device keeps its key. A patch of another device type loads its sound inside the same step; a patch of
the device's own type only changes its sound, and what the model refuses (another kind, a console device, a
frozen track) is told in the status line. The project format stays 43. - Restructuring follow-ups: a percent panel for Scale Tempo, a Reverse Clips preference, joining audio clips and
draggable crossfade zones. Edit > Scale Tempo > Other opens a panel with one text field for any percentage
from 10 to 1000 (a comma or a percent sign is understood): the selected clips show the result while you type,
Enter or APPLY makes it one undo step, and Esc or CLOSE puts the clips back. The panel opens on the last
percentage. Reverse Clips follows a new "Reverse clips" row of Settings > Interface (notes mirror as bars, the
default, or only their starts, saved inworkflow.json); the explicit Reverse Note Starts item and thebarsand
startsarguments ofsequencer.reverse_clipsdo not follow it. Join Clips now works on audio: consecutive
pieces of one file that touch or overlap, continue each other in the file and agree on gain, warp and mute become
one clip that sounds exactly as the pieces did (the gain envelope is merged); pieces of different files, a gap, a
jump in the file, a fade at the join, a reversed or looped clip and warp markers are refused with a message that
names the clips and the files. Pressing in the crossfade zone at the start of an audio clip and dragging moves
the cut and the crossfade together: the later clip starts later or earlier and the earlier one ends later or
earlier by the same distance, with a live preview, snapping to the grid, one undo step, and Esc to cancel
(MoveCrossfadein the model). Dragging a clip edge with Alt, which scales each clip about its own fixed edge,
already covered edge-drag scaling. The project format stays 43. - Six CV utilities: CV math, quantizer, sample and hold, slew limiter, gate processor and envelope follower.
CV Math adds, subtracts, multiplies, takes the minimum or maximum, or the absolute value of two CVs (the second
is a knob until a cable is attached), then scales and offsets the result. The CV Quantizer snaps a pitch CV
(the one of the sequencers: 24 semitones per unit, 0 at middle C) to the nearest note of any of the piano
roll's 16 scales on a root, with a transpose and a trigger at every change of note. Sample and Hold keeps the
CV (or seeded noise, so a bounce repeats) it saw at each trigger, free-running tick or note value of the
tempo, the last locked to the song position while playing. The Slew Limiter has its own rise and fall time,
linear or exponential, from 0.1 ms to 10 s. The Gate Processor combines two gates with and, or, xor, nand or
nor, divides, delays by up to two seconds and sets the length, with a trigger output at every rise. The
Envelope Follower turns the level of an audio signal (peak or RMS, attack and release, linear or dB curve)
into a CV and a gate while passing the audio through. All six are in the device browser, bounded under any
parameters and signals, and documented in the device reference. The project format stays 43. - Five new effects: transient shaper, de-esser, auto-filter, tuner and pitch shifter. The Transient Shaper
raises or lowers the attack and the sustain of a signal whatever its level (two followers of the stereo power,
their difference in dB decides), withattackandsustainCV inputs and a transient CV output. The De-esser
turns sibilance down in its own band (the band is subtracted by the share that is turned down, so nothing
else moves) or across the whole signal, with a listen switch and a CV input for the centre frequency. The
Auto-Filter sweeps a 12 or 24 dB low-pass, band-pass, high-pass or notch filter with an LFO (five shapes,
free or at a note value of the tempo and locked to the song position while playing, a stereo spread) and with
the level of the input, with CV inputs for cutoff, depth and rate and an LFO CV output. The Tuner passes the
audio through, optionally muted, and shows the note, the deviation in cents and the frequency on a needle
scale like the audio track's tuner, against its own A4 shifted by the project's master tune. The Pitch Shifter
moves a signal up to an octave either way with a correlation-aligned cross-fade, keeps the stereo image, takes
a pitch CV input and reports its latency exactly (the delay at a shift of zero, where the output is the
input delayed bit for bit; 7.6, 15.1 or 25.1 ms at 48 kHz for the three quality settings) so the delay
compensation lines it up. All five are in the device browser, bypassable, bounded under any parameters, and
documented in the device reference. The rotary speaker is still to come. The project format stays 43. - FLAC export, stems between the locators and a loudness report. The export panel has a FLAC choice next to
WAV and AIFF, for Export Song, Export Loop and Export Stems, at 16 or 24 bits (FLAC has no 32-bit float, so
that button is inert while FLAC is chosen). The encoder is our own, with no new dependency: fixed predictors,
Rice coding and stereo decorrelation, silence stored in a few bytes, and the MD5 of the samples in the header
soflac -tand other tools can verify the file. It quantises exactly as the WAV writer does, so a FLAC file
decodes to the same samples as the WAV of the same export, and the same project gives the same bytes. MP3
stays out until its encoder licence is settled. Export Stems has a RANGE row: the whole song, or only what lies
between the locators with no tail, lined up and numbered as before. Every finished export now says how loud it
is, in the toast and in the log: the integrated loudness in LUFS, the true peak in dBTP and the loudness range
in LU of the audio that was written (after any sample rate conversion); for stems the toast shows the master's
and the log every file's. The MCPsession_exporttakescontainerflacand returns aloudnessobject for
the file and for each stem. FLAC and the range are remembered inexport.json. The project format stays 43. - Console strip clipboard, longer insert chains and strip header buttons. In the console, Cut, Copy, Paste and
Duplicate (the Edit menu and the usual keys) work on the selected strips. A copied strip is its channel with the
instrument or track device that feeds it, the song track and every setting of the channel (levels, sends,
processing and the insert chain with the settings of its effects; plugins are not copied). Paste puts the new
strips after the selected strip, Duplicate does the same without touching the clipboard, and each is one undo
step; Cut copies and then deletes as Delete Channel does. A strip copied in the console can also be pasted in the
rack or the arrangement, which take its devices and tracks. Dragging a channel name with the copy modifier held
(Ctrl, or Cmd on macOS) copies the channel to the drop position instead of moving it. An insert chain now holds
up to sixteen effects (an edit used to stop at four); the INSERTS section still shows four rows, scrolls a longer
chain with the wheel and shows a thin bar at its right edge, and the track panel lists as many insert rows as the
chain has. Each channel name plate has RACK and SEQ buttons that show the channel's device in the rack and its
track in the arrangement, and the coloured band along its top picks the colour of the track when the device has
one; a track with no colour of its own shows its folder's colour. Buses, the master and channels with no source
device are not copied. The project format stays 43. - MIDI controller data and MIDI file follow-ups. In the piano roll's controller area you can select several
points: Shift-click adds or removes a point, a Shift press on empty space drags a rubber band, and Select All
takes the whole lane. A selected point drags the whole selection (time on the grid, value at the MIDI
resolution, the shape kept); Delete removes it, Copy and Cut put the points on the clipboard and Paste lays
them into the lane shown from the playhead (the values keep their place in the range, so a bend can become a
CC; points past the clip's end are dropped), each one undo step. The new THIN chip (and
editor.thin_controllerswithnormal,heavyormaximum) simplifies the selection, or the whole lane when
nothing is selected, dropping ramp points the line reproduces and held values that repeat.Shift+L
(editor.toggle_controllers) shows and hides the controller area. The sampler answers the mod wheel (CC 1):
wheel.to_pitchdeepens the LFO vibrato (default 1 semitone) andwheel.to_cutoffopens the filter (default
1 octave); with the wheel at rest nothing changes. File > MIDI Export Resolution writes MIDI files at the native
15 360 ticks per quarter note, 960 or 480 (kept in the preferences; ticks are rounded, a note keeps at least a
tick). Exported song and track files now carry range markers (a marker named after the range at its start and
one named<name> (end)at its end). Program changes and complete SysEx messages in an imported file are kept
in the clip and written back on export (bank selects already travelled asCC 0andCC 32lanes). The
project format stays 43: a note clip's"programs"and"sysex"are optional, written only when set, and
ignorable. Deferred: controller lanes without a note clip, MPE (per-note expression) lanes, a groove taken from
a MIDI file, editing or clearing a clip's program changes and SysEx, and reading range markers back as ranges. - Track organisation follow-ups. A folder mutes and solos by itself: the M and S buttons of a folder row set
the folder's own flags, every track in it (and in its sub-folders) plays as muted or soloed with it, the
tracks keep their own flags, and a track's button shows dimmed while a folder holds it. A folder is dragged by
its header into and out of other folders, with its tracks and sub-folders, in one undo step. A track with no
colour of its own shows the colour of the folder it is in. Colour > Custom... in the track and folder menus
opens a colour picker (a saturation and value square, a hue strip, a hex text and the six palette colours as
quick picks). Interface > Colour new tracks (off by default) gives each new track the palette colour the
fewest tracks use. A rubber band over the track headers (drag from the empty part of the header column below
the last track, or Alt and drag from a header; Shift or Ctrl keeps the selection) selects the tracks it
touches. The project format stays 43: a folder's"muted"and"solo"are written only when set, and an
older reader refuses them. Deferred: stacked bars for clips in tracks under 32 px, routing the tracks of a
folder to an output bus with a folder fader, a comment of several lines, and folding the controller lanes in
the piano roll. - Takes follow-ups. Takes copy between take groups and between songs: Copy Take and Copy All Takes in a take
row's menu (or Edit > Copy on a take row) put the takes on the clipboard, and Paste Takes (or Edit > Paste)
adds them to a group as new takes on top, each playing over its extent like a new recording, or starts a
group on the selected lane at the playhead. The clipboard survives New and Open and follows you to another
open song. Import File as Take adds an audio file (an audio group) or a MIDI file (a note group) to a group
as a new take that starts where the group starts. Alt+Down and Alt+Up step between the take rows that are
shown, Alt+P plays the focused take alone and Enter opens it. A take opens in the piano roll or the audio
editor (Open in Piano Roll and Open in Audio Editor in its menu), and what you change there edits the take,
one undo step each, with the comp compiled again. New command idssequencer.take_next,
sequencer.take_prevandsequencer.take_pick; the project format is unchanged. Deferred: a razor tool on
takes, comping several tracks at once and takes for automation passes. - Live groove per track. A track can name a groove (one of the song's or a built-in one) and a strength,
saved on the track and applied when the song is flattened for the engine, the offline render and the MIDI
export, so the stored notes never change: editing a template re-times every track that uses it, and removing
the groove gives the original sound back bit for bit (the track's notes move by the offset of the nearest
grid slot, their velocity follows the slot's scale, both by the strength). The Track Panel has a Groove
section for a note track: arrows step through none, the built-in grooves and the song's, and a bar sets the
strength. New commandsSetTrackGrooveandRenameGroove;DeleteGroovetakes the groove off the tracks
that used it, in the same undo step. The project inspector lists a track's groove. The project format is
now 43: a reader of 42 would play the notes ungrooved, so it refuses a file whose tracks have a groove
instead of ignoring it; a project without a live groove differs from its version 42 file in the version
line alone. Deferred: a groove per clip, controller points that move with their notes, a text field to
name a groove (the rename command exists), grooves from a MIDI file or an audio loop, and bar lines that
follow meter changes for the swing parity. - Recovery and fault follow-ups. A recovery snapshot now opens with its audio: the writer leaves a note
next to each snapshot that has audio, naming the project folder it was taken in, and opening the snapshot
copies that audio into the new unsaved song (an older snapshot without the note still shows its clips as
missing). A recovered recording is one undo step, track and clip together. When the chosen audio device is
lost, or does not open and the last working configuration plays instead, the app reads the device list
every few seconds and, once the device is listed again, switches back to it by itself (not while the song
plays or records), with a log line and a toast; that is one try, so a device that is listed but still does
not open is not retried in a loop, and choosing devices in the settings forgets the one to go back to. A
device that panics outsideprocess(taking a parameter, a sample or pattern hand-off, a meter or latency
read) is now caught on the audio thread like one that panics inprocess: only that device is silenced
and named, the others keep playing. No saved field changes (the project format is unchanged). - Phase lock for a followed MIDI clock. The clock input now counts the sender's position (the last Start
or Song Position Pointer plus one clock's worth of ticks for each clock that arrives while it runs), and
the player holds the song to it: once per batch it moves the position a few frames towards the sender's,
closing the difference over an eighth of a beat and never changing the pace by more than 10 %, so a
sender whose tempo wanders no longer drifts from the song. A difference of more than a beat (clocks lost
on the cable) relocates; a Start or a Song Position Pointer still jumps to its position. A sender that has
not said where it is (clocks and Continue only) is followed by tempo alone, as before. - Audio clips while following a clock. Audio clips used to be silent while the song followed an external
clock; they now play. Each clip starts where the followed song reaches its first frame and plays at its
own rate, and a locate, the transport starting, a loop wrap or a new song restarts the clips underway from
the right place. Clips are not stretched to the followed tempo (a long take drifts by the share the two
tempos differ) and streamed audio stays silent while following. No saved field changes (the project
format is unchanged). - Several open songs. Window > New Song Window and Open Song in New Window open a song in a window of its
own (Ctrl+Shift+N and Ctrl+Shift+O, Cmd on macOS); each song has its own undo history, panes, plugins,
autosave and recovery snapshots, and the Window menu lists the open songs (Next Song and Previous Song,
Ctrl+Shift+PageDown and PageUp, switch between them). Closing a song's window (Window > Close Song Window,
Ctrl+Shift+W, or the window's close button) runs that song's own question about unsaved changes and ends its
plugin instances; quitting asks about every song with changes. The audio device stays unique: only the song
you are working in has the audio stream, the MIDI keyboard and the control surfaces; clicking another song's
window moves them to it, and the song that lost them is silent ("another song has the audio") with its
transport stopped until it is focused again. A song opened next to the first keeps its recovery copies in
recovery/song-<n>and writes no plugin crash journal. With one song open nothing changes, and the MCP
server still hosts one song. Not done yet: moving clips, devices, channels and patches between open songs,
separate Input Focus and Play Focus, and recovery of a second song after a crash. No saved field changes (the
project format is still 42). - Manual release test protocol.
docs/RELEASE-TESTING.mdlists the checks that need a device, a real plugin, a
display or an installer (audio devices and unplugging, MIDI in, out, clock and control surfaces, plugins and the
sandbox on each OS, detached windows and mixed-scale monitors, the listening check, installers), each with a
stable id, its steps, the expected result and the automated test it complements.scripts/release/test-report.sh <version>writes the report skeleton with the environment captured, refuses a protocol with a repeated id, and
verifies a filled report per operating system. The release workflow does not require the report yet. - Pixel goldens, view properties and a wider allocation guard. The transport bar, arrangement, piano roll,
console, rack, a context menu, cut labels and a CJK string have PNG goldens at 1x and 2x (the transport bar and
the piano roll also at 1.25x), compared by a perceptual tolerance with a per-OS pin and a diff image that CI
uploads when one fails. Random gesture scripts on the arrangement and the piano roll check that no emitted command
is refused, that selections stay valid, that a view told the document revision draws what an always-syncing view
draws and that undoing everything restores the document. Twenty-seven more render test files bounce under the
allocation guard through one helper, and a test lists every render test that still does not, with its reason.
Fixed: a double click on an audio lane no longer tries to draw a note clip, dragging a gain envelope point can no
longer leave its clip, and a note moved onto another note of the same key and tick now replaces it instead of
producing a note list the model refuses. No saved field changes (the project format is still 42). - UI widgets. The arrangement, console, plugin parameter and container lists that offer rows to pick from
(input and parameter lists, bus and source lists, take commands, plugin presets, macro and CV lists) now share one
pick-list widget for geometry, scrolling, hover and frame, so a new list costs its rows only. The file browser's
search and path fields use the same text field as the Song Information panel: a caret, a selection, the clipboard
and input-method composition. Names in the file browser and the rename fields are cut and positioned by measured
text, so Cyrillic and CJK names are no longer clipped or shortened early. The arrangement and the audio editor
place their hairlines in the middle of a physical pixel, so lines stay one pixel wide at 125, 150 and 175 percent
display scaling. The rack forgets the view state of devices that were removed. No saved field changes (the project
format is still 42). Still to do: the remaining menus and label fits that estimate their width, the split of the
large view files, a view table indexed by pane, screen-reader support, and the dependency of the UI crate on the
DSP crate (the tuner, FM, strip EQ, shaper, grain and wavetable displays still read it). - Refinements. Edit, Quantize Audio now honours the Quantize panel's swing, groove and humanize time: the
groove shapes the grid lines, and the timing amount randomises each moved transient by an offset that depends
only on the seed, the clip and the transient's number, so the same seed gives the same take and the markers stay
strictly in order. A clip that already has warp markers of its own quantizes those markers instead of detecting
transients. Edit, Normalise To brings the selected audio clips to a peak of -1 dBFS, an RMS of -18 dBFS or an
integrated loudness of -23 or -14 LUFS through the clip gain, as one undo step; Normalise Audio still aims at
0 dBFS. Help, Export Device Parameter List writes a text table (device | key | name | unit | min | max | default | discrete) of every built-in device parameter in a stable order. View, Detach Browser puts the file
browser in a window of its own; its position and size are remembered, closing it docks the browser again, and
the commandview.detach_browserand the--detach browseroption do the same. Shift+Up and Shift+Down in the
arrangement extend the track selection. An armed audio track is monitored live only while the transport is
stopped or recording, so plain playback no longer doubles the input over the clips. No saved field changes
(the project format is still 42) and no bounce changes. The tuner button in the track header, the device icon
double-click, creating a track from a console strip, reversed warped clips, the Recording Meter window and the
per-track default stretch type are not part of this change. - Rack sorting, Track Panel and folder clips. View, Rack Sorting keeps the rack arranged by track: Rack per
Track gives every track (its instrument, players, channel, inserts and effects) a column of its own and never
leaves one empty, Auto-Group keeps the devices of a track together, and No Grouping leaves the columns manual as
before. The arranging happens in the same undo step as the edit that needed it, and moving one device moves its
whole track. Right-click, Select All in Device Group selects a track's devices, and View, Single Column lays
the columns out as one without changing the project. A project saves the mode as the optionalrack_sortfield
only when it is not No Grouping, so older projects load as before and the project format is still 42; no sound
changes. View, Track Panel docks a column on the right that shows the selected track's players, instrument,
four insert slots, sends and fader, with bypass, move up and down and remove on the players and inserts, send
switches and a fader drag, each one undo step. Folder rows now draw folder clips: a bar for each run of
overlapping clips in the folder, which selects those clips when pressed, so moving (in time only, never to
another track), muting, deleting, duplicating, splitting and the razor, eraser and mute tools act on all of
them. Adding or replacing a device from the Track Panel is not part of this change. - Drum designer pads. Every pad of the drum machine can play a synthesised voice instead of a sample: a
kick, snare, hat, tom, tone or noise module, chosen with the new pad Module knob and shaped by Body, Snap and
Sweep (what each does depends on the module). A module pad needs no samples and behaves like any other pad:
choke groups, retrigger, the 32 shared voices, level, pan, velocity, tune and the pitch CV, the individual
outputs and the pad's tone, cuts, drive and two sends all apply, and the pad label shows the module name. The
drum machine panel is one rack unit taller for the four new knobs. Pads left on Sample sound exactly as before
and the project format is still 42. The creative sampler with live stretch is not part of this change. - Semi-Modular synthesizer. A new instrument,
atomik.semi-modular, built from slots: three oscillator
slots (saw, pulse, triangle, sine, one of the 32 additive waves, one of the 12 wavetables with a morph position,
a band-limited two-operator FM and noise), three filter slots (12 dB low-, band-, high-pass and notch, the 24 dB
ladder and a comb; series, parallel or split routing), a shaper (soft, asymmetric, hard and fold), three
envelopes and two LFOs. The eight-slot modulation matrix joins eleven sources (envelopes, LFOs, velocity, key,
mod wheel, pressure, the sequencer step and a random value per note) to fifteen targets (pitch, each oscillator's
level and shape, each filter's cutoff and resonance, the drive and the level). A sixteen-step sequencer on the
device's own tempo-synced clock plays the voices from the keys: the last key pressed is the root the pattern is
transposed to, with step length (1/4 to 1/32 and triplets), length, swing, gate and ties, and the gate and pitch
of the sounding step go out on CV jacks. Poly, mono and legato play with glide and at most eight voices; a
render is the same bit for bit at every host block size. The panel is the generated one (13 U) and the
matrix opens with the same command as the poly synth's. No existing sound changes and the project format is
still 42. - Real-time stretch preview. A warped clip is heard stretched at once: while its high-quality buffer is still
rendering, the clip plays through an interim voice that reads the audio through the clip's time map (tempo
changes and ramps, warp markers, trims) with Hermite resampling, so a tempo change or a marker drag is never
silent and never plays the clip unwarped. The interim voice resamples, so the pitch follows the stretch and a
transposition is only heard once the finished buffer arrives; streamed (very long) files keep playing unwarped
until then. A CALC chip on the clip header shows which clips are still rendering, and the finished buffer takes
over with a 5 ms crossfade, so the swap does not click. Bounces and exports never use the interim voice: they
render every buffer first, so their bytes are unchanged. - Plugin CV programmer and aux outputs. Every plugin device has eight CV inputs (
cv_in_1tocv_in_8on its
back panel), so a Mod Source LFO, an envelope or a sequencer curve can move a plugin's parameters. Each input has
a destination (any parameter of the plugin) and a bipolar amount; the device panel is now 3 U with a CV
PROGRAMMER row under the pinned knobs (a chip naming each destination and an amount knob), and the CV button of a
row in the PARAMS pane assigns that parameter to a CV input through the same search. The device reads each CV
once per 64-frame batch, so the result is the same in process, in the sandbox and for every block size. A plugin
with several stereo output buses gets a pair ofout_aux_<k>_l/rsockets for each extra bus (up to seven), so
each part of a multi-output instrument can go to its own mixer channel; CLAP and VST3, in process and in the
sandbox (the shared audio block grew and its protocol version is 2). The new sockets come after the old ones, the
assignments are ordinary device params saved only when set, and a project that uses none of it saves and loads as
before (the project format is still 42). The plugin scan cache is rebuilt once to learn the extra buses. - Container CV, sixteen macros, switches and split pass flags. A container has four CV inputs (
cv1tocv4
on its back panel); inside, the INPUT strip has the matching CV jacks, so a modulation source cabled to the
container drives any inner CV input (one jack fans out to several), and the bounce is bit for bit the one of
the same patch built without a container. A container has sixteen macros instead of eight: macros 9 to 16 are
on a new MACROS 9-16 tab of the container editor, and "Map to macro" in a control's menu lists all sixteen. Any
macro can be made a switch with the KNOB / SWITCH button (its targets get their minimum below one half and their
maximum from one half up); a switch shows an ON / OFF button in its row. Each note split has B, C and P chips
that stop it passing pitch bend, controller changes or pressure to its device (it always plays its notes). A
project that uses none of it saves as before apart from the version line: the new fields are written only when set,
and the project format is now 42, so a reader of 41 refuses a file that uses them instead of failing on an unknown
field. Deferred: macro sources (wheel, bend, pressure, velocity, key) driving inner parameters at
engine rate and a custom panel designer.
Signing: Windows not signed, macOS ad-hoc signed only, SHA256SUMS is not signed. A build that is not signed makes the system warn on first launch; see the README for the first-run steps. Verify the downloads against SHA256SUMS.
Full changelog: v0.3.0-rc.2/CHANGELOG.md