v0.10.1

macOS (experimental): the macOS build is untested on real hardware and not notarized.
After copying Dubgefahren.vst3 to ~/Library/Audio/Plug-Ins/VST3, remove the quarantine with
xattr -cr ~/Library/Audio/Plug-Ins/VST3/Dubgefahren.vst3 and rescan plugins in your DAW.

What's Changed

• fix(engine): assert instead of silently overwriting a grain in GrainStretch::launch by @atze187 in #41
• refactor(engine): consolidate the fade head setup in SamplePlayer by @atze187 in #43
• fix(engine): keep the grain crossfade at unity when the grain size grows by @atze187 in #44
• chore: bump version to 0.10.1 by @atze187 in #45

Full Changelog: v0.10.0...v0.10.1

v0.10.0

macOS (experimental): the macOS build is untested on real hardware and not notarized.
After copying Dubgefahren.vst3 to ~/Library/Audio/Plug-Ins/VST3, remove the quarantine with
xattr -cr ~/Library/Audio/Plug-Ins/VST3/Dubgefahren.vst3 and rescan plugins in your DAW.

What's Changed

• Update README.md to remove checklist and duplicate entry by @atze187 in #38
• Add experimental macOS build (universal VST3) and CMake presets by @atze187 in #39
• chore: bump version to 0.10.0 by @atze187 in #40

Full Changelog: v0.9.0...v0.10.0

v0.9.0

What's Changed

• feat: per-pad colours (#14) by @atze187 in #36
• chore: bump version to 0.9.0 by @atze187 in #37

Full Changelog: v0.8.0...v0.9.0

v0.8.0

What's Changed

• feat: vintage time-stretch for samples (S950 character) by @atze187 in #34
• chore: bump version to 0.8.0 by @atze187 in #35

Full Changelog: v0.7.0...v0.8.0

v0.7.0

What's Changed

• docs: effects section, acceptance checklist entries and accepted spec statuses by @atze187 in #27
• docs: bring the spec statuses up to date by @atze187 in #28
• feat: Space, Grit and Throw performance knobs and a live view by @atze187 in #29
• docs: mark the performance knobs spec as accepted by @atze187 in #30
• chore: bump version to 0.7.0 by @atze187 in #31

Full Changelog: v0.6.0...v0.7.0

v0.6.0

Highlights

• Tape delay with RE-201 character: repeats get a little darker and softer every pass, a gentle asymmetric tape saturation and head bump sit in the loop, wow and flutter now drift irregularly instead of repeating, and a faint tape noise runs in the feedback loop (it only rings up when feedback is high; self-oscillation at 110 % is unchanged).
• New Drive saturation: soft and warm in the lower half of the knob, increasingly hard in the upper half, with anti-aliasing (ADAA) and partial level compensation. Drive 0 still passes the signal through untouched.
• Phaser on the delay returns: a soft four-stage phaser that only affects the echoes, so the dry signal stays clean. New knobs Rate, Depth and Mix (group PHASER in the FX panel); Mix defaults to 0, so existing projects sound the same until you turn it up.
• Configurable pad mapping: the new MIDI menu in the header sets the MIDI note of pad 1 (default 36) and lets you put pad 1 at the top left of the grid. For the Intech Grid BU16 use note 32 and Pad 1 at top left. The setting is stored per user in %APPDATA%\Dubgefahren\settings.json and applies to all projects.

Things to know when updating

• Drive and the delay sound different from 0.5.0. Existing projects and kits load fine, but the effects have a new character. The phaser is off by default.
• Drive details: from the first touch above 0 the highs are softened slightly (about -2 dB at 10 kHz), and very loud signals get quieter towards the top of the knob, while moderate signals get louder.
• The window is 20 % wider (base width 1200 instead of 1000 pixels). The stored window scale is relative to the base width, so existing projects open with a wider window; with a stored scale of 1.6 or more the right edge can leave a 1920 px screen until you resize the window.
• Three new automatable parameters: Phaser Rate (0.05 to 3 Hz), Phaser Depth and Phaser Mix. Old project states without them load with their defaults.
• The PHASER knobs are a temporary place; they will move into an Advanced area together with upcoming performance knobs.

What's Changed

• Pad mapping: configurable pad 1 note and grid origin (BU16) by @atze187 in #22
• feat(engine): RE-201 style tape delay character by @atze187 in #23
• feat(engine): soft-to-hard saturation with ADAA for Drive by @atze187 in #24
• feat(engine): phaser on the delay returns by @atze187 in #25
• chore: bump version to 0.6.0 by @atze187 in #26

Full Changelog: v0.5.0...v0.6.0

v0.5.0

What's Changed

• UI restyle: material depth and state lighting by @atze187 in #16
• Sample regions: start/end, loop, reverse by @atze187 in #18
• Bump version to 0.5.0 by @atze187 in #19

Full Changelog: v0.4.0...v0.5.0

v0.4.0

What's Changed

• Update GitHub Actions to Node 24 versions by @atze187 in #5
• Update README with project evaluation notes by @atze187 in #10
• Add empty slot with sound source selection by @atze187 in #9
• Add sample player as a sound source per slot by @atze187 in #12
• Bump version to 0.4.0 by @atze187 in #13

Full Changelog: v0.3.0...v0.4.0

v0.3.0

What's Changed

• Add CPU meter to the editor header by @atze187 in #4

Full Changelog: v0.2.0...v0.3.0

v0.2.0

What's Changed

• Switch user interface language to English by @atze187 in #3

Full Changelog: v0.1.0...v0.2.0