Skip to content

Releases

Audivane DSP 0.9.3 (beta)

Choose a tag to compare

@Triet1402 Triet1402 released this 16 Nov 04:23

Audivane DSP 0.9.3 (beta)

Fixes the status bar input sample rate. IN now follows the live engine
input rate, so input rate × upsampling ratio matches OUT.

For example, with a 96 kHz track and a connected 48 kHz browser stream,
the status bar now shows 96k → ×4 → 384k instead of
48k → ×4 → 384k. The existing UI is preserved. Audio processing was
already using the correct rate.

Packages: Arch Linux, Ubuntu 24.04+ / Debian 13+, and Fedora 40+ (x86_64).
SHA-256 checksums are in SHA256SUMS.

Existing packaged installs can update with avdsp upgrade. Restart the
desktop app after updating.

Audivane DSP 0.9.2 (beta)

Choose a tag to compare

@Triet1402 Triet1402 released this 16 Nov 00:29

Audivane DSP 0.9.2 (beta)

Easier updates, an editable sample-rate list and clearer filter labels.

Updating

  • avdsp upgrade updates Audivane DSP in one command: it checks the latest
    release, downloads the package for your distribution, verifies its SHA-256,
    installs it with sudo, restarts the engine and confirms the new version is
    running. avdsp upgrade --check only reports whether an update exists.
  • Installing a new package over an old one now restarts the running engine
    (before, the old engine kept running until you restarted it yourself).
  • If the app was open during an update, a banner offers Restart to finish.
  • Starting audivane-dsp by hand while the service runs now says it is
    already running instead of "device reservation denied".

App

  • Device page: the sample rates are buttons. Click a rate to allow or
    block it. All ten engine rates are listed (44.1k–768k); 352.8k and up are
    off by default and can be turned on, e.g. so DXD reaches the DAC unresampled.
    A dot marks the default rate; right-click a rate for Use as default. The
    rate playing now is outlined. Also available as avdsp ctl rates.
  • Upsampling page: the rate tabs are now labelled Preview at and list
    the allowed rates; a Playing: 48k button returns to the live rate.
  • Filter shape labels show the Kaiser β: β 10 · Steep, β 14 · Standard,
    β 17 · Deep, β 20 · Deeper, β 24 · Deepest, with a hint on the trade-off.

Install or update

From 0.9.1 or earlier, run the install command for your distribution again;
the package replaces the old version and restarts the engine. From 0.9.2 on,
avdsp upgrade does it for you.

# Arch Linux
curl -fLO https://github.com/audivane/dsp/releases/download/0.9.2/audivane-dsp-0.9.2-1-x86_64.pkg.tar.zst
sudo pacman -U ./audivane-dsp-0.9.2-1-x86_64.pkg.tar.zst

# Ubuntu 24.04+ / Debian 13+
curl -fLO https://github.com/audivane/dsp/releases/download/0.9.2/audivane-dsp_0.9.2-1_amd64.deb
sudo apt install ./audivane-dsp_0.9.2-1_amd64.deb

# Fedora 40+
sudo dnf install https://github.com/audivane/dsp/releases/download/0.9.2/audivane-dsp-0.9.2-1.x86_64.rpm

Full list in CHANGELOG.md.

Audivane DSP 0.9.1 (beta)

Choose a tag to compare

@Triet1402 Triet1402 released this 15 Nov 23:11

Audivane DSP 0.9.1 (beta)

A bug-fix release for devices with limited formats and for high sample rates.

Fixes

  • Devices that only play some rates or formats now work. A 48 kHz-only,
    16-bit USB speaker failed with "no supported sample format found". The
    engine now probes what the device accepts (rates, formats, significant bits)
    when it opens it. It offers PipeWire only rates the device can play (so
    44.1 kHz apps are resampled into a 48 kHz graph) and falls back to a smaller
    upsampling ratio when needed. ALSA errors now name the parameter the device
    rejected and say what it supports.
  • Dither follows the device format. An S16 device got 24-bit dither
    truncated to 16 bits; dither is now capped at the format in use.
  • 88.2, 176.4 and 352.8 kHz output was partly silent (present since
    0.9.0, on any device) while status said "playing, 0 xruns". The DAC period
    now matches the quantum PipeWire actually runs at every rate.
  • Settings could not be saved on a fresh install ("Read-only file
    system"): the service sandbox now creates ~/.config/audivane-dsp and makes it writable.
  • Fewer needless device reopens. A config change such as a new filter
    length no longer reopens the device or briefly shows 44.1 kHz.
  • Direct (bit-perfect) uses native device rates only; streams at other
    rates show as "resampled". Routing back to DSP recovers from an error.
  • The Arch install command downloads the package first; pacman -U <url>
    asks for a .sig file, which the release does not ship.

Changes

  • Upsampling: 32k, 128k and 512k tap filter lengths and Kaiser β 24.
  • The app greys out formats the DAC never takes, explains fallbacks, and the
    Device page lists sample rates and which ones are resampled.
  • Routing: "System default" is now "Not through Audivane" and names the output
    it goes to; it is only offered in per-app mode.
  • Meter readouts keep a fixed width, so large chain gains no longer move the meters.

Install

# Arch Linux
curl -fLO https://github.com/audivane/dsp/releases/download/0.9.1/audivane-dsp-0.9.1-1-x86_64.pkg.tar.zst
sudo pacman -U ./audivane-dsp-0.9.1-1-x86_64.pkg.tar.zst

# Ubuntu 24.04+ / Debian 13+
curl -fLO https://github.com/audivane/dsp/releases/download/0.9.1/audivane-dsp_0.9.1-1_amd64.deb
sudo apt install ./audivane-dsp_0.9.1-1_amd64.deb

# Fedora 40+
sudo dnf install https://github.com/audivane/dsp/releases/download/0.9.1/audivane-dsp-0.9.1-1.x86_64.rpm

Then systemctl --user daemon-reload && systemctl --user restart audivane-dsp
(or enable --now on a first install). Full list in
CHANGELOG.md.

Audivane DSP 0.9.0 (beta)

Choose a tag to compare

@Triet1402 Triet1402 released this 15 Nov 08:10

Audivane DSP 0.9.0 (beta)

The first public release of Audivane DSP: system-wide parametric EQ,
convolution and upsampling for Linux and PipeWire, with filters you can inspect.

Highlights

  • One processor for the whole system. The engine opens your DAC directly
    over ALSA, drives the PipeWire graph from the DAC's clock and processes in
    64-bit float. Two outputs: Audivane DSP (processed) and Audivane Direct
    (bit-perfect, for a dedicated music player).
  • Parametric EQ with L+R, L and R sections, AutoEQ / Equalizer APO import
    and target overlays. Convolution with WAV impulse responses.
    Upsampling up to 768 kHz with 16k–4M tap filters, linear or minimum phase,
    plotted from the real filter.
  • Follows your music's sample rate. When several apps play at different
    rates, the first one keeps the rate and the others are resampled
    (Device → Mixed rates to prefer the highest or the default rate).
  • A/B comparison with A-weighted level matching; TPDF or noise-shaped dither;
    system-wide or per-app routing; live meters and spectrum.

Install

File Distribution
audivane-dsp-0.9.0-1-x86_64.pkg.tar.zst Arch Linux
audivane-dsp_0.9.0-1_amd64.deb Ubuntu 24.04+ / Debian 13+
audivane-dsp-0.9.0-1.x86_64.rpm Fedora 40+
sudo pacman -U https://github.com/audivane/dsp/releases/download/0.9.0/audivane-dsp-0.9.0-1-x86_64.pkg.tar.zst
# or: sudo apt install ./audivane-dsp_0.9.0-1_amd64.deb
# or: sudo dnf install https://github.com/audivane/dsp/releases/download/0.9.0/audivane-dsp-0.9.0-1.x86_64.rpm

systemctl --user daemon-reload
systemctl --user enable --now audivane-dsp

Then open Audivane DSP from your app menu. Setup guide:
https://audivane.app/docs/dsp/. Verify downloads with sha256sum -c SHA256SUMS.

Known limits

  • 64-bit x86 Linux with PipeWire only.
  • Used daily on Arch with PipeWire 1.6. The Ubuntu and Fedora packages are
    built against Ubuntu 24.04 (glibc 2.39, PipeWire 1.0) and install-tested, but
    have seen little real use yet; reports are welcome.
  • While it runs, the engine uses your DAC exclusively.