Skip to content

Releases

305ap firmware 20261113

Choose a tag to compare

PX4 firmware and bootloader for the avian automata 305ap flight controller.

Commit 105f20c274 · PX4 1.18 development line, NuttX 12.12

Which file do I need?

File Use it for
avianautomata_305ap_default_20261113.px4 Firmware update. Install it in QGroundControl: Vehicle Setup → Firmware → PX4 Flight Stack → Advanced settings → Custom firmware file... (Quickstart, Step 2)
avianautomata_305ap_default_20261113.bin The same firmware as a raw image, for dfu-util or STM32CubeProgrammer at 0x08020000 (Flashing)
avianautomata_305ap_bootloader_20261113.bin Bootloader, only for a blank board or one that never shows up as PX4 BL 305AP. Flash it at 0x08000000 in DFU mode (Bootloader)
SHA256SUMS Checksums for the files above

Boards ship with the bootloader and a current firmware already installed.

Changes in 20261113

  • New: the 305ap is now part of upstream PX4 (PX4/PX4-Autopilot#29689). This release is built from upstream main at the merge; the board files are identical to upstream.
  • Updated: PX4 to current upstream main.
  • Unchanged: the bootloader. Its source is the same as 20261110; boards on the 20261110 bootloader don't need to update it.

Earlier releases are listed in the Changelog. To build it yourself from upstream PX4: make avianautomata_305ap_default (Building from Source).

305ap firmware 20261110

Choose a tag to compare

PX4 firmware and bootloader for the avian automata 305ap flight controller.

Commit e9308cbc21 · PX4 1.18 development line, NuttX 12.12

Which file do I need?

File Use it for
avianautomata_305ap_default_20261110.px4 Firmware update. Install it in QGroundControl: Vehicle Setup → Firmware → PX4 Flight Stack → Advanced settings → Custom firmware file... (Quickstart, Step 2)
avianautomata_305ap_default_20261110.bin The same firmware as a raw image, for dfu-util or STM32CubeProgrammer at 0x08020000 (Flashing)
avianautomata_305ap_bootloader_20261110.bin Bootloader, only for a blank board or one that never shows up as PX4 BL 305AP. Flash it at 0x08000000 in DFU mode (Bootloader)
SHA256SUMS Checksums for the files above

Boards ship with the bootloader and a current firmware already installed.

Changes in 20261110

  • Changed: all eight outputs now default to DShot300. Set a timer group to PWM if it drives servos or PWM-only ESCs.
  • Changed: ESC serial telemetry on the Motors connector starts automatically.
  • Changed: board ID is now 6700, the ID reserved for the 305AP.
  • Changed: the bootloader accepts firmware over USB only.
  • Updated: PX4 to current upstream main.

Earlier releases are listed in the Changelog. To build it yourself: make avianautomata_305ap_default (Building from Source).

305ap firmware 20261104

Choose a tag to compare

PX4 firmware and bootloader for the avian automata 305ap flight controller.

Commit f25a86710c · PX4 1.18 development line, NuttX 12.12

Which file do I need?

File Use it for
avianautomata_305ap_default_20261104.px4 Firmware update. Install it in QGroundControl: Vehicle Setup → Firmware → PX4 Flight Stack → Advanced settings → Custom firmware file... (Quickstart, Step 2)
avianautomata_305ap_default_20261104.bin The same firmware as a raw image, for dfu-util or STM32CubeProgrammer at 0x08020000 (Flashing)
avianautomata_305ap_bootloader_20260429.bin Bootloader, only for a blank board or one that never shows up as PX4 BL 305AP. Flash it at 0x08000000 in DFU mode (Bootloader)
SHA256SUMS Checksums for the files above

Boards ship with the bootloader and a current firmware already installed. Updating firmware never needs a new bootloader.

Changes in 20261104

  • Fixed: boards with the LSM6DSV16X IMU read as upside down when level, because the IMU rotation was wrong. Accelerometer calibration detected the wrong side, and the attitude was inverted. Boards with the ICM-45686 were not affected.

Earlier releases are listed in the Changelog. To build it yourself: make avianautomata_305ap_default (Building from Source).