Repository navigation
EDEXO 1.3.8 — program folder (.zip) + Linux (tested on WSL Ubuntu)
A journal-linked exobiology and colonisation companion for Elite Dangerous. Compare reads your local journal, merges scans and organic signals, and predicts the candidate species on a body from FSS/DSS telemetry alone — with payout ranges, first-footfall tracking, a system map, a customisable HUD and a species encyclopedia. Colonize follows your construction sites and plans the hauling, trip by trip.
This release is the unpacked program folder. For the single-file version, see v1.3.8 — same version, same code.
Extract EDExoCompare-1.3.8-win-x64.zip; it contains one folder, EDEXO 1.3.8. Run EDExoCompare.exe inside it. The console builds are under resources\, where the data and web folders they need sit beside them.
Boxels can be flown in the shortest order instead of by number, and the Boxels screen is laid out again: one field to add a boxel, each boxel's actions behind one menu, and one strip for what you are flying. The Neutron and Spansh route tabs share one banner for the route you are flying, with jumps and destinations counted separately. On the radar, other species' composition scans are yellow, your samples carry their number, and distances switch to km. The HUD's Exo candidates get settings of their own, the Scan route can show fewer names and follow the next planet, the app moves a little more like a piece of software, every effect with its own switch, and on the Scan route your ship can travel to the target as you fly.
New
- Shortest boxel order. Each boxel can be flown By number or Shortest: its systems in the shortest path from where you are, so EG-Y g20 → g121 → g96 instead of g0, g1, g2. Positions come from routes you plotted in the galaxy map (Plot route, not only Set target) and from Spansh; systems with no position follow by number. The next system to fly, F6 and F8 / F9 follow the order. One boxel of 59 placed systems: 7,162 ly in this order, 24,376 ly by number.
- The Boxels screen, laid out again.
- One field at the top: paste any system of a boxel and Add (empty, it adds the boxel you are in).
- Each saved boxel shows its name, bar and counts; its actions sit behind ⋯: Fetch from Spansh, Start or Finish run, Check the end ("Copy -58 to search the map", "-58 isn't in the map"), Last system, Delete.
- A Flying strip: next to fly, Order By number / Shortest, Copy after each jump, and the run.
- The side tabs read To fly / Done / Flown through; the summary reads "12 / 58 flown · 3 skipped · 40 known elsewhere" with the split in its tooltip.
- The "next boxel" line in the main screen's header is switched in Options › Look › Next boxel line.
- One banner for the route you fly. The Neutron and Spansh route tabs show the same banner and the same Stop; the route's stops are listed in the same table as a plan, the next one highlighted. Progress reads "jump 37 of 112 · destination 1 of 2" (in the tabs, the tray, the HUD chip and on the map).
- Open a Spansh route in the Neutron tab: its start and end are handed over, to plan it with EDEXO.
- HUD Exo candidates: Candidate settings (launcher › HUD settings): scanned species in the usual order, on top or hidden (the hidden ones counted in a last line), at most 1-30 candidates shown (9 by default; the phone lists all), and the species you are sampling always on top (on by default).
- Scan route: show the names of all bodies, only the route's planets or only the next planet; and zoom to the next planet, which follows your ship and the next stop together, closing in as you fly (pan or scroll to look elsewhere). Target a body out of the route's order and the route stays as it is, with a dotted blue line from your ship to your target.
- Motion effects (Options › Look › Motion, each with its own switch, only with Motion at Full):
- buttons sink as you press them and spring back, with a ripple of small triangles in your accent colour;
- the ? explanations open fast first, then slow;
- changed numbers roll their digits into place (data value in the tray and the HUD, Boxels, Scan route, Statistics, Achievements);
- a circle and a tick when the journal has loaded, on the loading screen and in the launcher;
- the launcher's HUD order can be dragged by its handle (the arrows stay);
- Unfinished business, Points of interest and Bookmarks refresh when pulled down at the top (or scrolled up past it).
- Scan route: your ship travels to the target (experimental, launcher › HUD settings › Radar & screen marker › "Read the target's distance off the HUD"): while the Scan route tab shows, in supercruise with a body of the system targeted, EDEXO reads the distance under the target's name off the game's screen four times a second ("1,957Ls", "13.1Mm"; at any other time it does not look) and moves your ship along the line from the last body to the target, the arrow pointing at it. Past the target, or with a frame it cannot read, the ship holds where it was. Local only: it looks at the screen, keeps nothing and sends nothing; needs borderless and the default HUD colours.
- Four photographs by CMDR Nimblor [TSEG]: Aleoida gravis Teal, Fungoida stabitis Orange, Stratum cucumisis Emerald and Tussock triticum Yellow. ED-DSN's Stratum cucumisis placeholder retires.
Changed
- Radar. Composition scans of the species you are sampling stay green; other species' scans are yellow. Your current run's samples carry their number (1, 2, 3). Distances under 1,000 m read in metres, from there in km ("1.2 km").
- Clear a planet's marks (key bind) keeps the sampling run in progress and its samples; composition scans and older samples still go.
- One route line on the map. While you fly a route, a Spansh route you are only reading is not drawn over it (the Spansh tab says so); stopping the flown route draws it.
- Fly a kept Spansh route works after Spansh has deleted its result: the stops travel with it.
- Neutron tab, route flown: the plan you made just to compare is no longer thrown away when the flown route is re-plotted; after a re-plot the stops keep their Fuel and FSD columns; following your carrier, the tab tells you to paste the next stop in the carrier's galaxy map.
- Faster shortest order: 2,000 systems in 0.2 s (was 1.9 s).
- Sample distances come from one place, the species data, for every genus.
Fixed
- The Neutron tab listed no jumps of a route flown from the Spansh tab, a re-plot or after a restart (and showed only "Download neutron stars" when those were not downloaded): the stops ahead are listed, with Stop.
- Boxels "Next to fly" could show one system while F6 and the copy after a jump took another; a fully flown boxel switched to Shortest went back to the saved ones.
- Deleting the end of a boxel came straight back when a plotted route or Spansh knew higher systems: delete is offered only past the highest known system.
- The [?] mass-code tables on the Boxels screen were a thin sliver.
- The shortest order line ran off the right edge with many systems: the first 20 are listed, the rest counted.
- Radar: a second species logged from the same spot got no mark; samples of an abandoned earlier run of the same species were drawn as the current one; a composition scan whose first log had no body name never showed in flight.
- The Spansh tab said "Stopped." when stopping had failed.
- Opening the Neutron tab with nothing flown erased a Spansh route's line on the map.
- Picking a system in a tab (My discoveries, Bookmarks, Boxels, the galaxy map's "Show on the main screen") closed that tab and showed the one to its left: the tab stays and Compare's main screen comes to the front; from Colonize, the app opens that system's map.
- Exact plotter routes (from a link or a saved JSON) showed their start and end as system numbers ("10477373803 → 3238296097059"): they read Sol → Colonia.
- The Exo-distance tracker stood open, its radar empty, in supercruise while a sampling run was in progress: it folds away off the planet, its title still reading "Sampling 1 / 3".
- The screen marker (experimental) drew each sample's ring on the ground as a dotted line across the whole screen when flying low: gone. The dotted line to the next plant stays on the HUD radar.
- The HUD reader (experimental) missed the minus of the pitch over bright sand with the landing gear down (-19 read as 19); its digits are now learned from 102 screenshots.
Where your data lives
%LOCALAPPDATA%\ED Exo Compare\ — settings, your LAN key, your EDSM credentials if you add them, the species you have scanned on foot, your Fix corrections, the journal folder you chose, your HUD layout, where your windows were, the systems you looked up on Spansh (kept 30 days), the shared exomastery folder, and the prediction caches. Nothing of yours is kept in the program folder, so replacing it on an update loses nothing. On Linux the same lives in ~/.config/edexo-compare. Backups go only where you point the Backups tile.
Your journals are read, never copied out. Uploads to EDSM, Canonn and EDDN happen only if you turn them on yourself. Looking a system up sends only its name or number to Spansh.
Windows will say the publisher is unrecognised. The executable is not code-signed, so SmartScreen asks first: "More info" → "Run anyway".
Licence
Code: PolyForm Noncommercial 1.0.0 with two additional permissions (showing the app in streams and videos is free; releases up to and including 1.2.20 stay MIT). Data: CC BY-NC-SA 3.0 (credit, no commercial use, share alike; part of it is derived from EDAstro) — see data/LICENSE-DATA.txt. The species photographs are Elite Dangerous screenshots: Frontier's game art, under Frontier's terms — NOTICE.md names every contributor and says which images are borrowed from the ED-DSN community. The list of Frontier-populated systems and looked-up systems come from Spansh.