Repository navigation
Releases
v0.1.0
GridLess 0.1.0 — first public release.
A gridless, topological autorouter for KiCad 10. It builds a planar topology
first, then draws any-angle tracks with arcs around pads, concentric bundles,
differential pairs and length matching.
Highlights
- any-angle copper, arcs around pads, automatic necking; no 45В° grid
- differential pairs stay coupled and are skew-compensated through intermediate parts
- length matching with meanders, with room reserved already in the topology
- preferred layer directions, via minimisation, planes and split planes
- gap equalisation ("radar") and a smoothing pass
- DRC feedback loop; optional zone check through
kicad-cliwith plane vias - deterministic output: the same binary gives the same board byte for byte
- plugin interface translated into all 44 languages shipped with KiCad 10
Result on the reference board
On the 4-layer Carrier board (43 parts, 281 pads, 75 nets): zero clearance
errors after KiCad's DRC, 28 vias versus 30 by hand, 1286 mm versus 1330 mm,
about 11 s with the zone check. A dense BLE board with a 0.4 mm QFN and an RF
section is still only partially routed — that is the next problem.
Install
- Download
gridless-0.1.0-pcm.zipbelow and use
Tools → Plugin and Content Manager → Install from File…. - Or add the third-party PCM repository (works before the official catalogue
listing):https://bat654321.github.io/GridLess/repository.json - Command-line archives for Windows, Linux and macOS are attached below.
The IPC plugin needs Preferences в†’ Plugins в†’ Enable KiCad API. The classic
SWIG plugin is available from the source repository's installer.
Checksums
gridless-0.1.0-pcm.zip— SHA-256
115afd73fe3a2a67959423bd0c65785f7f13ba1d4b5577839817230585104635
(14,531,872 bytes)
Status
Early testing. Save your board and keep a backup. The official KiCad catalogue
submission is open at
kicad/addons/metadata!759.
MIT licensed. Source, documentation and the longer write-up:
https://github.com/bat654321/GridLess