Skip to content

Releases

3Shipsty 1.0.8

Choose a tag to compare

@becaring becaring released this 09 Nov 15:28

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.8

  • Saves from Ship of Harkinian on PC import into a profile that has already played 3Shipsty. Copy the PC Save folder beside 3Shipsty.xex, and at launch each save goes into its matching slot if that slot is empty. Saves already on the profile are never overwritten, and a save you delete in game stays deleted.

Changes in 1.0.7

  • Lower input lag. Each game frame now reads the controller as late as it can and still finish on time, and finished frames wait in a shorter queue before reaching the screen. Together that cuts about 50 ms of delay while holding 60 FPS.
  • The mod menu's Apply & Close keeps the new mod order. It could quit before the order finished saving, and the restart only looked for 3Shipsty.xex, so a renamed XEX went back to the launcher. It now saves first and restarts the XEX in the game folder.

Changes in 1.0.6

  • Fixes the first-launch failure where building oot.o2r from the ROM shut the console off or showed "Building the ROM archive failed". The asset builder used a text format the console's C runtime rejects, which stops the game on a console without a debug monitor such as xbdm. The test console runs one, so it skipped past the error.

Changes in 1.0.5

  • A crash while building oot.o2r or oot-mq.o2r from the ROM no longer shuts the console off. 3Shipsty restarts and builds the archive again on one thread. If that also fails, it shows an error and returns to the dashboard.
  • The archive is written under a temporary name and renamed once complete, so an interrupted build no longer leaves a broken oot.o2r that reports an incompatible SoH version. A broken archive left by an earlier version is removed and rebuilt from the ROM automatically.

Changes in 1.0.4

  • A startup error now shows its message instead of a black screen that shuts the console off. This hit a first launch with no supported ROM beside 3Shipsty.xex, among other startup errors. Closing the message returns to the dashboard, and logs\startup-fault.txt records the error.

Changes in 1.0.3

  • Start pauses reliably. The game read the controller once per game frame, so a quick tap often fell between two reads and was lost. Quick taps of any button now reach the game, the way they do on N64.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.8.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from an earlier release, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.7

Choose a tag to compare

@becaring becaring released this 09 Nov 04:51

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.7

  • Lower input lag. Each game frame now reads the controller as late as it can and still finish on time, and finished frames wait in a shorter queue before reaching the screen. Together that cuts about 50 ms of delay while holding 60 FPS.
  • The mod menu's Apply & Close keeps the new mod order. It could quit before the order finished saving, and the restart only looked for 3Shipsty.xex, so a renamed XEX went back to the launcher. It now saves first and restarts the XEX in the game folder.

Changes in 1.0.6

  • Fixes the first-launch failure where building oot.o2r from the ROM shut the console off or showed "Building the ROM archive failed". The asset builder used a text format the console's C runtime rejects, which stops the game on a console without a debug monitor such as xbdm. The test console runs one, so it skipped past the error.

Changes in 1.0.5

  • A crash while building oot.o2r or oot-mq.o2r from the ROM no longer shuts the console off. 3Shipsty restarts and builds the archive again on one thread. If that also fails, it shows an error and returns to the dashboard.
  • The archive is written under a temporary name and renamed once complete, so an interrupted build no longer leaves a broken oot.o2r that reports an incompatible SoH version. A broken archive left by an earlier version is removed and rebuilt from the ROM automatically.

Changes in 1.0.4

  • A startup error now shows its message instead of a black screen that shuts the console off. This hit a first launch with no supported ROM beside 3Shipsty.xex, among other startup errors. Closing the message returns to the dashboard, and logs\startup-fault.txt records the error.

Changes in 1.0.3

  • Start pauses reliably. The game read the controller once per game frame, so a quick tap often fell between two reads and was lost. Quick taps of any button now reach the game, the way they do on N64.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.7.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from an earlier release, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.6

Choose a tag to compare

@becaring becaring released this 08 Nov 16:21

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.6

  • Fixes the first-launch failure where building oot.o2r from the ROM shut the console off or showed "Building the ROM archive failed". The asset builder used a text format the console's C runtime rejects, which stops the game on a console without a debug monitor such as xbdm. My test console runs one, so it skipped past the error.

Changes in 1.0.5

  • A crash while building oot.o2r or oot-mq.o2r from the ROM no longer shuts the console off. 3Shipsty restarts and builds the archive again on one thread. If that also fails, it shows an error and returns to the dashboard.
  • The archive is written under a temporary name and renamed once complete, so an interrupted build no longer leaves a broken oot.o2r that reports an incompatible SoH version. A broken archive left by an earlier version is removed and rebuilt from the ROM automatically.

Changes in 1.0.4

  • A startup error now shows its message instead of a black screen that shuts the console off. This hit a first launch with no supported ROM beside 3Shipsty.xex, among other startup errors. Closing the message returns to the dashboard, and logs\startup-fault.txt records the error.

Changes in 1.0.3

  • Start pauses reliably. The game read the controller once per game frame, so a quick tap often fell between two reads and was lost. Quick taps of any button now reach the game, the way they do on N64.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.6.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from an earlier release, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.5

Choose a tag to compare

@becaring becaring released this 08 Nov 15:26

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.5

  • A crash while building oot.o2r or oot-mq.o2r from the ROM no longer shuts the console off. 3Shipsty restarts and builds the archive again on one thread, which is slower but avoids the crash. If that also fails, it shows an error and returns to the dashboard.
  • The archive is written under a temporary name and renamed once complete, so an interrupted build no longer leaves a broken oot.o2r that reports an incompatible SoH version. A broken archive left by an earlier version is removed and rebuilt from the ROM automatically.

Changes in 1.0.4

  • A startup error now shows its message instead of a black screen that shuts the console off. This hit a first launch with no supported ROM beside 3Shipsty.xex, among other startup errors. Closing the message returns to the dashboard, and logs\startup-fault.txt records the error.

Changes in 1.0.3

  • Start pauses reliably. The game read the controller once per game frame, so a quick tap often fell between two reads and was lost. Quick taps of any button now reach the game, the way they do on N64.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.5.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from an earlier release, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.4

Choose a tag to compare

@becaring becaring released this 08 Nov 14:00

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.4

  • A startup error now shows its message instead of a black screen that shuts the console off. This hit a first launch with no supported ROM beside 3Shipsty.xex, among other startup errors. Closing the message returns to the dashboard, and logs\startup-fault.txt records the error.

Changes in 1.0.3

  • Start pauses reliably. The game read the controller once per game frame, so a quick tap often fell between two reads and was lost. Quick taps of any button now reach the game, the way they do on N64.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.4.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from an earlier release, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.3

Choose a tag to compare

@becaring becaring released this 08 Nov 11:31

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.3

  • Start pauses reliably. The game read the controller once per game frame, so a quick tap often fell between two reads and was lost. Quick taps of any button now reach the game, the way they do on N64.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.3.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from an earlier release, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.2

Choose a tag to compare

@becaring becaring released this 08 Nov 02:47

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.2

  • Quit and the mod menu's Apply & Close no longer leave a black screen. Quit returns to the dashboard or your launcher, and Apply & Close restarts 3Shipsty so the new mod list loads.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.2.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from 1.0.0 or 1.0.1, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.1

Choose a tag to compare

@becaring becaring released this 08 Nov 00:32

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Changes in 1.0.1

  • Fixes a crash right after the storage popup on consoles that refuse the save container, reported on BadAvatar. Saves then go in a Save folder beside 3Shipsty.xex, and logs\boot.txt records why.
  • Cancelling the storage popup now starts the game with saves in that folder instead of crashing.

Install

  1. Download 3Shipsty-1.0.1.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

To update from 1.0.0, copy the new 3Shipsty folder over the old one. Your saves and the game data built from your ROM are kept.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3

3Shipsty 1.0.0

Choose a tag to compare

@becaring becaring released this 07 Nov 21:43

Ocarina of Time on Xbox 360, powered by Shipyard.

3Shipsty brings Ship of Harkinian 9.2.3 (Ackbar Delta) to Xbox 360. It runs at 1080p and 60 FPS, with 100% TAS validation on real hardware. It builds its game data from your own ROM on first launch, so the release contains no Nintendo data.

Install

  1. Download 3Shipsty-1.0.0.zip below, not GitHub's Source code ZIP.
  2. Copy the 3Shipsty folder to your console.
  3. Put your own Ocarina of Time ROM (.z64, .n64 or .v64) beside 3Shipsty.xex. supportedHashes.json lists the supported versions. Master Quest needs its own ROM.
  4. Launch 3Shipsty.xex. The first launch builds the game data from your ROM, and later launches reuse it.

Mods go in a mods folder beside 3Shipsty.xex. Back opens the menu.

Known Limitations

  • Tested on an RGH console. It should work on ABadAvatar, BadUpdate and PeerPressure consoles, but those haven't been tested.
  • Heavy texture packs and model replacement packs, such as 3DS-style model packs, can run out of console memory or run well below full speed.
  • Translations and other mods should work but haven't been tested extensively.
  • Networking features are implemented but not validated, and may not work at all.

Reporting a problem

Open a bug report and attach the logs folder from the 3Shipsty folder as a zip. A report without a log and a description closes automatically and reopens when you add them.

License

3Shipsty links eSpeak NG, so this release is distributed under GPL-3.0-or-later. SOURCE.txt in the ZIP names the source commits, and the licenses folder holds the licenses of 3Shipsty, Shipyard and the components they include. 3Shipsty is an unofficial fan project, unaffiliated with Nintendo, Harbour Masters or Microsoft.

Support Me

If you had fun with 3Shipsty, a donation is NEVER required but always appreciated <3