Repository navigation
Releases
WalkScape 0.2.1
WalkScape puts you on a walk during video calls: it replaces the background behind you with a
moving 3D scene (a forest road, a mountain trail, a medieval street, a Paris street, a seaside
promenade or an indoor corridor) that walks at your pace, and gives the result to FaceTime, Zoom,
Meet, Teams and other video apps as a camera called WalkScape Camera. Everything runs on your
Mac: no account, no telemetry, and your picture never leaves it. The app goes online for one thing
only: to check for a new version.
The app and the disk image are signed with a Developer ID and notarized by Apple, so they open
normally.
New since 0.2.0
- No more black window at launch. WalkScape now shows your scene, already walking, the moment
its window opens, and fades you in once the camera and Apple's Video Effects engine are ready
(usually about a second later). Until then a small label at the bottom of the preview says what
it's waiting for ("Starting camera…", "Loading Video Effects…"), or what's wrong if the camera
can't start, such as camera access being turned off or no camera connected. - Faster start. The Video Effects engine now loads while the camera starts, instead of after
the camera's first picture. It used to add several seconds to the first launch after an update. - Smoother colours at launch. With Match the webcam on, the scene now adjusts to your
camera's brightness and colour gradually over the first second instead of jumping.
Requirements
- A Mac with Apple silicon (M1 or later). Intel Macs aren't supported.
- macOS 15 or later. Apple's Video Effects engine is used through undocumented interfaces and
was checked on macOS 27.2; where it doesn't work, the Vision cutout takes over.
Install
- Download WalkScape-0.2.1.dmg below and open it.
- Drag WalkScape onto the Applications folder in the window that opens, then eject the
disk image. The virtual camera only installs from the Applications folder. - Open WalkScape from Applications. macOS asks whether to open an app downloaded from the
Internet: click Open. Then allow camera access. - For video calls: in the settings panel, click Install Virtual Camera, then turn WalkScape
on in System Settings → General → Login Items & Extensions → Camera Extensions (called
Media Extensions on macOS 27). - In your video app, choose WalkScape Camera as the camera. Restart the video app if it was
already open.
Prefer a zip? WalkScape-0.2.1.zip holds the same app: unzip it and move WalkScape to Applications.
Updating from an earlier version: replace the app in Applications and open it. The virtual camera
itself hasn't changed, so it keeps working without a restart.
WalkScape Camera shows exactly what the app's preview shows. While the app is closed it shows a
"waiting for WalkScape" card. To remove it, use WalkScape → Remove Virtual Camera…, or delete
the app.
Good to know
- If macOS's own Video Effects (Control Center → Video Effects, such as Background) are on,
macOS applies them on top of WalkScape's. The app warns you when they are on; turn them off.
SHA-256:
WalkScape-0.2.1.dmg:11d1c8c1d7803ed3f80ecc2ebf5453a0bf4a9f7cca7fb6bb644de8f6a92e00a9WalkScape-0.2.1.zip:5ad3bb6af0927b1a4ec9bddb79421fc6be72839277e5c0c215c910307a74d4b0
WalkScape 0.2.0
WalkScape puts you on a walk during video calls: it replaces the background behind you with a
moving 3D scene (a forest road, a mountain trail, a medieval street, a Paris street, a seaside
promenade or an indoor corridor) that walks at your pace, and gives the result to FaceTime, Zoom,
Meet, Teams and other video apps as a camera called WalkScape Camera. Everything runs on your
Mac: no account, no telemetry, and your picture never leaves it. The app goes online for one thing
only: to check for a new version (see below).
The app and the disk image are signed with a Developer ID and notarized by Apple, so they open
normally.
New since 0.1 (build 43)
- Update notifications. The version is now shown at the top of the settings panel. Once a
day, WalkScape asks GitHub whether a newer release is out; when there is one, Update
Available appears next to the version and opens the release page. WalkScape → Check for
Updates… checks right away, and WalkScape → Check for Updates Automatically turns the daily
check off. It is a single request to GitHub with no account and nothing that identifies you or
your Mac, and the app's only internet connection. macOS doesn't ask about it; a firewall app such
as Little Snitch would. - Webcam position now comes right after the camera and the virtual camera in the settings
panel: switching to another camera usually means setting its position too. - Version numbers are now plain versions: this is 0.2.0, the next ones will be 0.2.1, 0.3.0 and
so on.
Build 43 and earlier don't check for updates, so this one update has to be done by hand. From
0.2.0 on, the app tells you.
Requirements
- A Mac with Apple silicon (M1 or later). Intel Macs aren't supported.
- macOS 15 or later. Apple's Video Effects engine is used through undocumented interfaces and
was checked on macOS 27.2; where it doesn't work, the Vision cutout takes over.
Install
- Download WalkScape-0.2.0.dmg below and open it.
- Drag WalkScape onto the Applications folder in the window that opens, then eject the
disk image. The virtual camera only installs from the Applications folder. - Open WalkScape from Applications. macOS asks whether to open an app downloaded from the
Internet: click Open. Then allow camera access. - For video calls: in the settings panel, click Install Virtual Camera, then turn WalkScape
on in System Settings → General → Login Items & Extensions → Camera Extensions (called
Media Extensions on macOS 27). - In your video app, choose WalkScape Camera as the camera. Restart the video app if it was
already open.
Prefer a zip? WalkScape-0.2.0.zip holds the same app: unzip it and move WalkScape to Applications.
Updating from an earlier build: replace the app in Applications and open it. The virtual camera
itself hasn't changed, so it keeps working without a restart.
WalkScape Camera shows exactly what the app's preview shows. While the app is closed it shows a
"waiting for WalkScape" card. To remove it, use WalkScape → Remove Virtual Camera…, or delete
the app.
Good to know
- If macOS's own Video Effects (Control Center → Video Effects, such as Background) are on,
macOS applies them on top of WalkScape's. The app warns you when they are on; turn them off.
SHA-256:
WalkScape-0.2.0.dmg:5201dfbe7e82c710b50b9e7e1a3457f523b0473d28ae5787eaeebadbf59d205aWalkScape-0.2.0.zip:26ea280895fb60924a95e9ec52741820127a3dca7fadf3a78286012e3dec7fd3
WalkScape 0.1 (build 43)
The first public release of WalkScape: a moving background for video calls. You walk an endless forest road, a mountain trail, a Paris street, a medieval market street, a seaside promenade or a corridor. Video apps get the picture from a virtual camera, WalkScape Camera.
Requirements
- An Apple silicon Mac
- macOS 15 or later. Apple's engine was checked on macOS 27.2. On other versions, the built-in Vision cutout takes over.
- A webcam
Install
- Open
WalkScape-0.1-43.dmgand drag WalkScape onto Applications. - Open WalkScape and allow camera access.
- In the settings panel, choose Virtual camera → Install Virtual Camera. Then allow it in System Settings → General → Login Items & Extensions, under Camera Extensions (Media Extensions on macOS 27).
- In your video app, pick WalkScape Camera.
Private API
WalkScape calls Apple's private Portrait.framework, the engine behind Video Effects → Background. This is undocumented and may break with any macOS update. When it does, WalkScape falls back to its own cutout, built on public APIs only.
The app is Developer ID–signed and notarized by Apple.
Checksum
SHA-256 df1b9aea7eb3979ff473544f4c887dc6d6faab738325c2d277a7326879dff4ae WalkScape-0.1-43.dmg