Repository navigation
FUBAR v1.1.45
Changelog
1.1.45
- Pairs with the SDR Town 0.2.125-experimental release asset and records the matched control DLL in CI provenance.
- Adds bounded website proxies for SDR Town named Inmarsat, SSTV, Satcom and Aircraft sessions, while preserving the primary-workspace routes.
- Inmarsat map identity now falls back to validated AES identity when ICAO has not arrived; aircraft markers show heading-aware arrows and retain source/registration/type details.
- Website 1090 tuning defaults to the Town-supported 2.4 MS/s capture rate instead of requesting an unsafe fixed 20 MS/s rate.
- Adds debugger-safe bridge instrumentation and rejects non-
/v1/or non-GET/POST bridge requests without logging credentials or radio payloads.
1.1.43
- Finalizes the 1.1.42 workspace alignment with the MSVC/CI portability fixes included.
- Publishes a source-matched package with the SDR Town 0.2.119 control DLL.
1.1.42
- Aligns the web workspace with SDR Town 0.2.119.
- Adds the native Inmarsat hybrid map and aircraft workspace status/control bridge.
- Uses capability-gated SDR Town commands and escapes live aircraft metadata before browser rendering.
- Release CI packages the matching
SdrTownControl.dllfrom the Town release asset.
1.1.41
- Paired with SDR Town 0.2.80. SSTV mode list includes HamDRM digital.
1.1.40
- Paired with SDR Town 0.2.79. ZIP includes matching
SdrTownControl.dll. - SSTV tab uses Town's mode list (Automatic first). Auto = 7-bit VIS, then 16-bit MP/MR/ML, then line-sync.
- Take control can Receive / Finish / Cancel live SSTV via
/v1/sstv/live|finish|cancel. No home lat/lon.
1.1.39
- Paired with SDR Town 0.2.76. ZIP includes matching
SdrTownControl.dll. - Website Satcom / Inmarsat / Aircraft / SDRplay tabs (Take control). No home lat/lon.
- Inmarsat: band plan + start/stop + log only. Voice follow is not offered.
1.1.38
- Website Inmarsat tab: band plans, Start/Stop, voice-follow + record, live ACARS/EGC message log bridged to SDR Town
/v1/inmarsat/*(requires SDR Town 0.2.71+ / matchingSdrTownControl.dll). - Aircraft map markers: orange = Inmarsat ADS-C positions (alongside green local ADS-B / blue OpenSky).
- Pairing note: GitHub Latest FUBAR remains 1.1.33 (Town 0.2.66 DLL). Town GitHub Latest is 0.2.74 — copy
SdrTownControl-0.2.74-win64.dllbesideFUBAR.exeasSdrTownControl.dll. Inmarsat in Town 0.2.74 is a prototype (no unique-word/FEC). This 1.1.38 source is not a GitHub release yet. - Home lat/lon is not on the website (set in SDR Town only). Satcom Start under Take control sends
force=true.
1.1.37
- Website Aircraft tab: OSM/Leaflet map of ADS-B / OpenSky tracks from SDR Town (read-only), click popout with flight info + photo when available. Requires SDR Town 0.2.70+ and matching
SdrTownControl.dll. - Satcom catalogue honesty mirrored via status (bookmark-only downlinks cannot arm).
1.1.36
- Website Satcom tab: home lat/lon (both hemispheres), CelesTrak TLE refresh, upcoming passes, Auto-track Doppler arm, and Arm ISS SSTV (requires SDR Town 0.2.69+ / matching
SdrTownControl.dll).
1.1.35
- Website Satcom tab: neon band-scanner UI (low/high/BW/mode, spectrum+waterfall, Start/Skip/Record/Stop, squelch) bridged to SDR Town via
SdrTownControl_Request(GET/POST /v1/satcom/*). - Requires SDR Town 0.2.68+ and matching
SdrTownControl.dll(Satcom scanner engine + AX.25/APRS + NOAA APT decode).
1.1.34
- Website Radio control shows SDRplay device controls (antenna, AGC, IFGR/RFGR, notches, Bias-T, HDR, clock OUT, diversity) only while SDR Town’s active device is SDRplay; otherwise the panel stays hidden and RTL direct-sampling remains as before.
- Requires SDR Town 0.2.67+ and matching
SdrTownControl.dll(addsSdrTownControl_Request/POST /v1/sdrplay).
1.1.33
- Website mode and frequency controls leave P25 Monitor CC / auto-follow so changes stick (no flip-back to P25).
- Mode highlight tracks live P25 monitoring; status polls no longer overwrite a command in flight.
- Ships matching
SdrTownControl.dllfrom SDR Town 0.2.66.
1.1.32
- Aligns with SDR Town 0.2.65: website UHF tones tab shows preferred DCS (one radio-style code), live DTMF, and the repeater heard list.
- Ships matching
SdrTownControl.dllfrom SDR Town 0.2.65. - Fixes leftover 1.1.30 version strings in the window title / about / station status.
1.1.31
- Website tabs for FM RDS, UHF CTCSS/DCS, and SSTV pictures (read-only status from SDR Town).
- While an operator has Take control, they can switch demods/modes and enable RTL direct sampling for HF (~500 kHz+).
- Mode buttons work from the Radio control tab and from the FM / UHF / SSTV quick actions.
- Frequency field no longer snaps back while typing; HF entries such as 7 MHz stay until Tune.
1.1.30
- Website keeps the operator Now playing text as the main title.
- Adds a smaller live P25 status under it: talkgroup + alpha tag while following voice, or
Listening to NSWGRN Controlwhile parked on the control channel. - Polls SDR Town about once a second so the public board stays current without overwriting the operator's now-playing field.
1.1.29
- SDR Town website control now exposes audio LPF on/off, LPF cutoff, volume, and known P25 control-channel selection.
- P25 Monitor CC can use a known control-channel dropdown or a manual frequency without disturbing the main tune field.
- SDR Town now auto-disarms Monitor CC when the selected frequency fails validation for too long, so a bad or stale control-channel lock does not keep auto-follow armed indefinitely.
1.1.28
- Added session-based SDR Town website control with Take control, queueing, release, and a server-enforced timer.
- Active controllers get a countdown warning, can extend only twice, and queued users cannot bypass the lease through direct API calls.
- SDR tuning fields now seed from SDR Town once for the active controller and are not overwritten by status polling while they have control.
1.1.27
- Added optional SDR Town website controls through
SdrTownControl.dll. - Website operators can tune SDR Town frequency, mode, bandwidth, RF gain, and P25 control-channel monitoring when enabled in FUBAR settings.
- Release ZIP now includes
SdrTownControl.dllso testers do not need to copy the bridge module manually.
1.1.26
- Operators can type a Now playing line (letters, numbers, and spaces). The public website
shows it in a large status board so listeners know what is on the air.
1.1.25
- Samsung Internet already treated live as a real radio stream; Chrome did not if
it first played a silent WAV or thought the phone was a desktop. Listen live on
Chrome now starts the MP3 radio stream on the tap (same path Samsung uses).
Phone radio forces that mode if Chrome still mis-detects.
1.1.24
- Android Chrome was still pausing after a few seconds with no status-bar player.
Chrome only keeps background audio (and the notification icon) for a real radio
stream the phone can decode. Android Chrome now uses the MP3 live stream for that;
PC stays 1:1 PCM. Also detects “desktop site” Android Chrome.
1.1.23
- Android Chrome uses a real media player on 1:1 PCM WAV so the status-bar icon
and pull-down controls appear, and the stream keeps playing when you switch apps.
Web Audio is what Chrome was pausing after a few seconds in the background.
1.1.22
- Live picks a keep-alive per device/browser, still 1:1 PCM: iPhone uses a hidden
video element, Android Chrome a hidden audio element, Firefox Web Audio, desktop
a silent hold. The live line shows which method is active.
1.1.21
- Live is 1:1 PCM again on every device (phones included). The phone WAV player is
gone. Phones still tap that same PCM into the OS media player so Android can keep
the stream when the browser is minimised, with no extra encode.
1.1.20
- Phones play live through a real WAV media stream so Android can keep going when
the browser is minimised, and iPhone can hear live the same way it already plays
saved clips. Desktop still uses the PCM jitter buffer. - Minimising no longer treats a cancelled fetch as “stop”; it reconnects when the
tab wakes. iPhone unlocks Web Audio on the Listen tap if WAV needs a fallback.
1.1.19
- Live listen no longer guesses FM or applies a 15 kHz low-pass. The SDR already
filters AM/NFM/WFM; FUBAR streams what it gets, 1:1, with no extra EQ. - Capture no longer downsamples high-rate VB-CABLE to 48 kHz.
- If a virtual cable is not 44.1/48 kHz stereo (for example 96 kHz or 7.1), the
admin banner warns to fix it in VB-Audio Control Panel.
1.1.18
- The website can use a port other than 80. From a terminal:
FUBAR.exe --cli --headless --web --port 8080
--portalso works with the GUI and is saved in Settings.
1.1.17
- Live 15 kHz FM audio low-pass is automatic. It turns on when the capture has
wideband energy (WFM, leaked stereo pilot) and turns off for mic, P25, SSTV and
other already-narrow audio so digital modes stay 1:1. The live line shows
FM LPF 15 kHz while it is engaged.
1.1.16
- Live WFM on phone/PC speakers was harsh while mic and P25 stayed clean. Broadcast
stereo (and left-only SDR audio) is a poor match for small stereo speakers; P25 and
mics are effectively the same on both channels so they hid it. - Listen live now defaults to Mono (same audio in both speakers). Tap Stereo
for true left/right. A 15 kHz low-pass keeps the FM pilot from rattling speakers. - Virtual-cable capture above 48 kHz is pulled down to 48 kHz with Windows’ quality
resampler so WFM treble is not aliased on phones.
1.1.15
- Live no longer gargles or vibrates on PC and phone. The player was pumping silence
whenever the buffer dipped, which amplitude-modulated whatever was playing — Stereo,
Left, Right and Mono all sounded the same because it was not a channel-mix bug. - Listen live now waits about a second before starting, never chops zeros into a live
stream, and pauses the download instead of dropping samples when the buffer is full. - The keep-alive WAV is muted so it cannot mix with the capture. The level meter is
drawn off the audio thread.
1.1.14
- Live WFM no longer “gurgles”: the player was skipping a few samples on every audio tick
to catch up, which warbled stereo. The playhead now stays put.
1.1.13
- Live playback no longer jumps when the buffer grows. It uses a continuous ring (and an audio
worklet when the browser allows it) so WFM stays time-stable instead of jittering.
1.1.12
- Live listen is 16-bit PCM at the capture rate again (1:1, KiwiSDR-style) so SSTV, POCSAG,
weather-fax and other non-voice modes are not smashed by MP3. - Playback uses a jitter buffer instead of scheduled snippets, which was the crackle.
- Phones request a screen wake lock while listening so the stream is not killed when the
display would otherwise sleep. Leave live boost at 0 dB for digital modes.
1.1.11
- Live listen is now a real MP3 radio stream in the browser's media player, not Web Audio PCM.
That keeps WFM smooth (no JS crackle) and keeps playing when a phone locks or the tab is
backgrounded, the same way a normal radio stream works.
1.1.10
- Live listen no longer plays the stream twice (Web Audio plus the hidden player), which sounded
like a delayed ghost of the same audio.
1.1.9
- Live listen keeps stereo for WFM/SDR instead of folding left and right together, which was adding
static. Quiet signals are dithered so they stay clean in 16-bit. - Phone lock and a minimised browser keep the live stream playing, using a real media session like
YouTube Music. The page also reconnects if the OS still pauses it.
1.1.8
- Public Server lists a station on the 24/7 hub at
https://gearsqueens.online/fubar-net. - Every FUBAR website loads that live directory so listeners can jump between stations.
- The hub itself is published at
https://gearsqueens.online/fubar/because the domain is HTTPS-only. - Heartbeats keep the list fresh; a station drops off about 90 seconds after it goes quiet.
1.1.7
- Live listen stays up when capture restarts, and the browser reconnects if the stream drops.
- Tools → Manage recordings deletes selected clips or files older than N days, and shows folder size.
- Tools → Settings can boost quiet live audio (SDR/VB-CABLE) without changing saved WAVs, and can
auto-delete recordings older than a chosen number of days. - Device, VOX, and website settings are remembered. A silent VB-CABLE input is no longer replaced
by a microphone after two seconds. - New recordings include the radio frequency in the file name, e.g.
268000kHz. - Copy URL puts the LAN website address on the clipboard for phones and other PCs.
1.1.6
- Any number of people can listen live at once; a second listener no longer drops the first.
- Tools → Settings sets the maximum live listeners (default 5). Extra visitors wait in a queue
until a slot frees. Lowering the cap does not kick anyone already listening. - The public site shows how many people are listening and how many are waiting.
1.1.5
- Saves captures to
%AppData%\Roaming\FUBAR\Vox_capturesand reloads that folder every start. - Copies clips from the old exe-side
recordingsfolder into AppData once, so history is not lost.
1.1.4
- Live listen now plays through Web Audio from a raw PCM stream, so browsers actually hear the capture.
- Stopped stuffing silence into the live stream, which made the player go quiet between packets.
- Lower live latency by joining nearer the capture edge and skipping ahead if the browser buffer grows.
1.1.3
- Live website stream of the same audio FUBAR is capturing, shared by all listeners from one ring buffer.
- Listen live in the browser without waiting for a saved clip.
1.1.2
- Added a public capture website on port 80 that lists recordings and plays them in the browser.
- Admins can enable or disable the website from the GUI; the setting is saved.
- Headless runs can serve the same site with
--web.
1.1.1
- The GUI now detaches from its console by default so no terminal remains visible.
- Added
--clito explicitly retain terminal output for headless operation, diagnostics, and automation.
1.1.0
- Renamed the program, executable, package, recording prefix, and repository to FUBAR.
- Embedded the FUBAR icon in the Windows executable and application window.
- Added a 180-degree rotated FUBAR wordmark to the main window.
- The status panel is red while idle/listening/paused and green only while recording.
1.0.2
- Fixed a WinMM monitor-buffer cleanup deadlock that could hang or crash on another PC.
- Prevents VB-CABLE and Voicemeeter capture-to-playback feedback loops and meter saturation.
- Added bounded event-driven monitor buffering to prevent unbounded memory growth.
- Hardened WASAPI decoding for 8/16/24/32-bit PCM plus 32/64-bit floating-point formats.
- Sanitizes invalid, infinite, and out-of-range samples before metering or conversion.
- Reports the active input format and catches audio-worker exceptions with a visible error.
1.0.1
- Fixed the disabled Apply button that prevented changed recording options from taking effect.
- Device, channel, and checkbox changes now restart capture immediately.
- Selects the Windows default capture endpoint and falls back from digitally silent inputs.
- Added input-device refresh and visible numeric dBFS readings for all four meters.
- Added clearer active-device and no-input-signal status messages.
1.0.0
- Native WASAPI capture with active Windows input-device enumeration.
- Stereo, left-only, right-only, and mono-mix routing.
- Live output monitoring and four independent input/output level meters.
- Configurable VOX threshold, pre-roll, and silence hold time.
- Resumable VOX sessions that pause on silence and append later audio to one WAV.
- Synchronized split-stereo recording to separate mono left/right WAV files.
- Automatic and continuous 16-bit PCM WAV recording.
- Replay-log window with playback and Explorer integration.
- Headless command-line mode for scripts and unattended operation.
- Portable x64 package requiring only standard Windows system DLLs.
1.1.44
-
Preserve recording position when resuming; correct pause/end button labels
and escape recording names. Recover Inmarsat channel lists after reconnect. -
Responsive, quieter web workspace with persistent live audio and control lease.
-
Preserve tune/SDRplay drafts, prevent overlapping polls and duplicate commands,
surface errors across tabs, disable actions without connection/permission/lease. -
SSTV RF mode selection; source-labelled Inmarsat map with stable markers,
active-call colour, tab resizing, and message line breaks. -
Desktop keyboard navigation, scrollable compact windows, visible Settings,
neutral listening status, and clearer recording-frequency metadata label. -
Pairs with SDR Town 0.2.120; no audio-engine or DSP changes.
-
Automated embedded-JavaScript regression tests run in CTest/CI.