Skip to content

Releases

INCA J2534 v1.0.3.1

Choose a tag to compare

@busmust busmust released this 27 Oct 10:44

Windows x86/x64 support package for BUSMUST CAN / CAN FD devices in INCA.

  • Updates an existing installation in its registered directory, including custom installation directories.
  • Improves recovery after an interrupted installation and checks registration ownership before upgrading or uninstalling.
  • Displays the specific installation error when setup cannot complete.

Download and extract busmust-inca-support-package-v1.0.3.1-windows.zip, close INCA and other clients using the provider, then run Install.cmd. The package includes both runtime architectures, the matching BMAPI library, Chinese/English READMEs and the Chinese illustrated guide. SHA256SUMS.txt contains the package checksum.

Validated: x86/x64 software regression, installer boundary checks, and installation/upgrade from the extracted release package. CAN, UDS and XCP communication code is unchanged in this release.


用于在 INCA 中接入 BUSMUST CAN / CAN FD 设备的 Windows x86/x64 支持包。

  • 自动识别已有安装并在原目录更新,包括自定义安装目录。
  • 改善安装中断后的恢复,并在升级、卸载前检查注册信息归属。
  • 安装失败时显示具体错误。

下载并解压 Windows ZIP,退出 INCA 及使用本包的其他客户端,运行 Install.cmd。包内提供双架构运行组件、匹配的 BMAPI、中英文说明和中文图文指南;校验值见 SHA256SUMS.txt。

INCA J2534 v1.0.2.1

Choose a tag to compare

@busmust busmust released this 27 Oct 09:08

文档被企业加密软件改写或占用时,支持包仍可正常安装。安装完整性校验仅检查 DLL;升级和卸载会保留已有文档。

下载与安装

下载 busmust-inca-support-package-v1.0.2.1-windows.zip,可使用 SHA256SUMS.txt 核对下载文件。GitHub 自动生成的 Source code 压缩包不包含可安装的运行组件。

先安装 BUSMUST USB 驱动,退出 INCA 及使用本包的客户端,完整解压 ZIP,双击 Install.cmd。在 INCA 中选择 BUSMUST - BMJ2534,API 版本 04.04。已安装用户使用相同安装目录更新。需要日后查阅的 PDF 指南和中英文说明,请从解压包中另行保留。

包内包含 x86/x64 组件、BMAPI 1.15.1.48 运行库、指南及许可证。INCA 及其功能仍需相应许可证和项目文件。支持 INCA 7.X.X,已验证环境记录见随包说明。

验证

  • x86/x64 Release 构建通过,各通过 158 项软件模拟回归。
  • 安装测试覆盖文档改写、缺失和独占锁定,以及损坏 DLL 的拒绝路径。
  • 两种架构的配置工具均可加载随包 BMAPI 并枚举本地设备。

本次未重复进行 INCA 总线通信测试。重新配置已连接设备前,请按指南释放硬件连接;若原生状态查询错误导致连接不可用,可退出并重新打开 INCA 后连接。

English

Document encryption or locks no longer prevent installation. Integrity checks apply only to DLLs, and updates/removal preserve existing documents. Download the Windows ZIP, install the BUSMUST USB driver, close INCA, extract the ZIP and run Install.cmd. Select BUSMUST - BMJ2534, API 04.04. Use the same installation directory for updates and retain the extracted guides for future reference.

The package includes x86/x64 components and BMAPI 1.15.1.48. Both architectures passed 158 mock regression checks and read-only device enumeration. INCA bus communication was not retested for this release. INCA features require their corresponding licences and project files. Release the hardware connection before reconfiguration; if a native status-query error leaves it unavailable, exit and reopen INCA before reconnecting.

INCA J2534 v1.0.1.1

Choose a tag to compare

@busmust busmust released this 26 Oct 14:40

BUSMUST INCA J2534 支持包 1.0.1.1。

本版整理中英文使用说明及中文图文指南,统一当前通道、采样点和重新配置操作的说明。README 使用通用 GitHub Releases 下载入口。

下载与安装

下载本 Release 的 busmust-inca-support-package-v1.0.1.1-windows.zip,可用 SHA256SUMS.txt 校验。Source code 压缩包不包含安装运行组件。

先安装 BUSMUST USB 驱动,正常退出 INCA,完整解压 ZIP,双击 Install.cmd。在 INCA 中选择 BUSMUST - BMJ2534 / API 04.04,配置实际通道后初始化。包内含 x86/x64 组件、BMAPI 运行库、使用指南及许可证,无需 Python 或编译工具。INCA 功能需要相应许可证与项目文件。

验证与支持

  • x86/x64 Release 编译成功,各通过 158 项软件模拟回归。
  • 从含中文和空格的目录解压并运行 Install.cmd,22 个安装文件哈希匹配;原通道配置保留。
  • 两种架构的配置程序均从无关工作目录启动,成功枚举真实设备,显示 J2534 1.0.1.1 / BMAPI 1.15.1.48。
  • 支持 INCA 7.X.X;验证环境记录为 7.3.7 / Windows 10、7.4.3 / Windows 10、Windows 11。

使用说明

重新配置已连接的设备前,按随包指南释放 INCA 的硬件连接。若原生状态查询错误导致连接不可用,可退出并重新打开 INCA 后连接;该异常的根因尚未确认。

English

This release updates the English/Chinese documentation and illustrated configuration guide. Download the Windows ZIP from this release, install the BUSMUST USB driver, close INCA, extract the complete ZIP and run Install.cmd. Select BUSMUST - BMJ2534, API 04.04, in INCA.

Both x86/x64 builds passed 158 mock regression checks per architecture. The extracted package installed successfully, all 22 payload hashes matched, saved settings were preserved, and both configuration tools enumerated real devices from an unrelated working directory. INCA and its optional features require the appropriate licences and project files.

Release the hardware connection before reconfiguration. If a native status-query error leaves the connection unavailable, exit and reopen INCA before reconnecting; its root cause is unconfirmed.

INCA J2534 v1.0.0.1

Choose a tag to compare

@busmust busmust released this 26 Oct 10:25

首个公开版本 / First public release

BUSMUST CAN/CAN FD 设备接入 INCA 的 J2534 支持包,版本 1.0.0.1。

下载与安装 / Download and install

  1. 下载 busmust-inca-support-package-v1.0.0.1-windows.zip 和 SHA256SUMS.txt。Source code 压缩包不包含安装运行组件。
  2. 先安装 BUSMUST USB 驱动,正常退出 INCA,完整解压 ZIP,双击 Install.cmd,按 Windows 提示允许安装。
  3. 使用 INCA 原快捷方式启动,添加 J2534 系统,选择 BUSMUST - BMJ2534 / API 04.04;打开设备配置,选择实际接线的通道并保存,然后初始化硬件。

包内包含 x86/x64 组件、BMAPI 运行库、中英文 README、中文图文指南及第三方许可证。无需 Python 或编译工具;INCA 及其 XCP/ODX-LINK 功能需要相应许可证与项目文件。

Download the Windows ZIP, not the automatically generated Source code archives. Install the normal BUSMUST USB driver first, close INCA, extract the complete ZIP and run Install.cmd. Then select BUSMUST - BMJ2534, API 04.04, in INCA and configure the physical channel. The ZIP bundles both x86/x64 runtimes and their licences; Python and build tools are not required to run it.

包含内容 / Included

  • Classic CAN / CAN FD and ISO-TP, for use with INCA monitoring, XCP and UDS features.
  • Direct full-channel selection, termination control and sampling-point settings.
  • Default nominal sampling 75%, CAN FD data sampling 80%; existing FD custom records remain compatible.
  • Source licensed under Apache-2.0, with separately identified upstream and BMAPI terms.

支持与验证 / Compatibility and validation

支持 INCA 7.X.X。已有验证记录:7.3.7 / Windows 10,7.4.3 / Windows 10、Windows 11。

This package was extracted into a new path containing spaces and Chinese characters and installed using its actual Install.cmd on Windows 11. All 22 installed payload files matched the ZIP manifest. Both x86/x64 configuration tools loaded the bundled runtime from an unrelated working directory. Native mock regression passed 158 checks per architecture. INCA 7.4.3 loaded the release DLLs and completed real-ECU UDS session changes, DID reads and TesterPresent exchanges.

已知边界 / Known boundaries

INCA features depend on the corresponding ETAS licences and valid project configuration. This release does not add ECU-specific security algorithms or programming files. Config changes apply at the next hardware Open; follow the included guide to release an existing connection before reconfiguration.

A single native BMAPI status-query failure was observed during local validation and is retained in the acceptance log. Communication recovered after reopening INCA; the following 130-second real-ECU run passed all 87 exchanges. The underlying cause has not been established.