Repository navigation
Releases
MoDule Seq 0.2.1 (preview)
MoDule Seq now runs on macOS as well as Windows: one zip holds the engine for both.
New
- macOS. The device's engine,
mdseq.mxo, is built for Intel and Apple Silicon, for macOS 11 or later, next to
the Windows one. Max loads the one for its system. On a Mac, 0.2.0 opened an empty window: Max could not create its
engine, which existed only for Windows. The macOS engine is built by GitHub's runners and passes the same tests,
but nobody has tried it on a Mac yet: reports are welcome.
Requirements and install
Windows 10 or 11 (64-bit), or macOS 11 or later; Live 12 with Max for Live; MoDule (or MD Drums) 0.1.0 or later, 0.1.1
or later for the Track names, 0.1.2 or later for the Accent and the Slide.
Unzip MModuleSeq-0.2.1.zip and put the MoDule Seq folder in Live's User Library under
Presets/MIDI Effects/Max MIDI Effect/, replacing 0.2.0's. Remove an older md-drums-seq folder (its engine has the
same name, and Max loads only one), and restart Live: Max never loads a new version of an engine it has already loaded.
On macOS, the engine is not notarized by Apple, so macOS refuses it as downloaded: the device's window stays empty
and Max's console says "mdseq: No such object". Once, in Terminal, take the download's mark off the folder (the path
is the User Library's default):
xattr -dr com.apple.quarantine ~/Music/Ableton/User\ Library/Presets/MIDI\ Effects/Max\ MIDI\ Effect/MoDule\ Seq
Licence
GPL-3.0-or-later. Third-party notices, the Max SDK's licence among them, are in NOTICE.md.
MoDule Seq 0.2.0 (preview)
MD Drums Seq becomes MoDule Seq, after the plug-in it plays, with a new interface, Push 2, the Machinedrum's Accent
and Slide, and the capture of what it played.
New
- MoDule Seq. The device, its folder and its repository take the plug-in's new name. Its update check follows the
new repository; 0.1.0 and 0.1.1 still find this release, through GitHub's redirect. - A new interface. MoDule's colours and Ableton Sans, as Max carries it inside Live: keys that fill with
MoDule's turquoise once chosen, screens for what the device reports (the Pattern playing and its length, the chain,
the take, the step shown, what Print did), a muted Track in coral. In the grid and the strip each empty step is a
key, a Hit is in ink, an accented step is amber; the steps past the Pattern's length are off, a line marks its end,
and the strip's pages past it cannot be chosen. The device no longer follows Live's theme. - Push 2. With Push on, the device takes Push 2 while it is on and its track is selected: the 32 steps of the
Track shown on the top four rows of pads, the 16 Tracks and the 16 Patterns below, a held step's Locks on the eight
encoders. Held, Delete clears a step or a Pattern, Duplicate copies a Pattern over another, Mute (or tapped, to
latch it) mutes Tracks, Accent marks steps; Double doubles the Pattern. See the README. - Accent and Slide, the Machinedrum's way. One trig row under the grid, as the menu at its left chooses: Swing
(as before), Accent (every Hit of an accented step plays at 128 + 2 x the Pattern's amount) or Slide (each Track's
locked values glide to those of its next Hit). They need MoDule 0.1.2 or later. - Capture. Capture writes the last take, what the device played since the transport last started, into a
Session clip per Track named "Take n", placed as Print places its clips. Print can now write it too: its menu chooses
the Pattern shown over 1 to 16 Passes, or the last take, and its button prints. - Clips only. A switch, and a Live parameter, with which the device sends no note-on: printed or captured clips
then play MoDule alone.
Changed
-
The Tracks of a user's bank are named: MoDule's User Machines, and a ROM Machine playing a user's Sample, after
that Sample's file. A long name is cut to its place, with an ellipsis, rather than broken on two lines. -
A chain is played by the sequencer itself: each Pass that begins queues the chain's next Pattern, so that a
Pattern of one step plays its step and a busy Live never skips or repeats one. Stopped and started again, the chain
goes on from the Pattern after the one played. -
The edit window's grid is drawn only while the window shows, and the update check runs once a day for every
device of a set together. -
The hello with which the device tells MoDule where to write its Kit is rarer in the MIDI it sends while stopped:
every ten seconds once MoDule answers (five before), and from one second to ten without an answer (every second
before).
Requirements and install
Windows 10 or 11 (64-bit), Live 12 with Max for Live, MoDule (or MD Drums) 0.1.0 or later, 0.1.1 or later for the
Track names, 0.1.2 or later for the Accent and the Slide. Unzip MModuleSeq-0.2.0-win64.zip, put the MoDule Seq
folder in Live's User Library under Presets/MIDI Effects/Max MIDI Effect/, remove the older md-drums-seq folder
(its engine has the same name, and Max loads only one), and restart Live: Max never loads a new version of an engine
it has already loaded. In a set made with MD Drums Seq, put MoDule Seq in its place.
Licence
GPL-3.0-or-later. Third-party notices, the Max SDK's licence among them, are in NOTICE.md.
md-drums-seq 0.1.1 (preview)
Two fixes for 0.1.0, both found in Live.
Fixes
- Live no longer quits when many Locks play at once. Live keeps the notes a Max device holds in a set of 128, and
quits when a note goes past it. The device held each Lock as a note until the next ratchet, so a step with many
Tracks and many Locks could hold several hundred notes (399 for the heaviest Pattern). A Lock played live is now a
note-on followed at once by its note-off: MD Drums reads a Lock at its note-on, and the device holds at most one note
per Track, plus the Lock being sent. Two devices playing the heaviest Pattern on one track, which made Live quit two
seconds after the start with 0.1.0, now play on. Printed clips keep their Locks' lengths. - The Track names stay. The Track tabs, the window's rows and the Lock knobs' Kit values could go back to numbers
for half a second to twelve seconds, about once a minute. The device now tells a Kit file that MD Drums is replacing
from a file that is gone, and says hello to MD Drums at its own pace, even when Max's interface thread is busy.
Requirements and install
As for 0.1.0: Windows 10 or 11 (64-bit), Live 12 with Max for Live, MD Drums 0.1.0 or later (0.1.1 or later for the
Track names). Unzip md-drums-seq-0.1.1-win64.zip, put the md-drums-seq folder in Live's User Library under
Presets/MIDI Effects/Max MIDI Effect/ in place of the old one, and restart Live: Max never loads a new version of an
engine it has already loaded.
Licence
GPL-3.0-or-later. Third-party notices, the Max SDK's licence among them, are in NOTICE.md.
md-drums-seq 0.1.0 (preview)
A step sequencer for MD Drums, as a Max for Live device: Hits with velocity, parameter Locks on each step, trig Conditions, ratchets, micro-timing, swing, a Fill, 16 Patterns and chains, and printing into Live clips that play MD Drums without the device.
This is a preview, for Windows only.
Requirements
- Windows 10 or 11, 64-bit.
- Ableton Live 12 with Max for Live (developed and measured on Live 12.2.1).
- MD Drums (releases): 0.1.0 or later plays the Hits and the Locks; 0.1.1 or later also names the Tracks after their Machines and shows the Kit's values on the Lock knobs. From 0.1.2 the plug-in is called MoDule, and the device works with it as it does with MD Drums.
Install
- Unzip
md-drums-seq-0.1.0-win64.zip. - Put the
md-drums-seqfolder into Live's User Library, underPresets/MIDI Effects/Max MIDI Effect/. Keep its files together: the device loads its engine,mdseq.mxe64, from its own folder. - Start Live, or restart it if it was running.
- Put MD Drums Seq on a MIDI track in front of MD Drums.
The README in the zip covers the strip, the edit window, printing and the update check.
Timing
Measured in Live 12.2.1 at 44.1 kHz: played live by the device, from its printed clips, and from a clip made by hand, MD Drums' attacks land on the same sample, 2 samples after the grid, with no measurable jitter.
Update check
At most once a day, as it loads, the device asks GitHub for the newest release of this repository (one HTTPS request to api.github.com; nothing is downloaded or installed) and shows a line in the strip when a newer one is out. "Check for updates", in the edit window, turns it off.
Licence
GPL-3.0-or-later. Third-party notices, the Max SDK's licence among them, are in NOTICE.md.
SHA-256 of the zip: b400c15c39071c3f32773626d34de132192229a8836e37e5a7e91d0048ad44be