Repository navigation
⬇️ Download & run (Windows — no Python needed)
- Under Assets below, download
MGU-SSH-windows.zip. - Unzip it anywhere (keep the whole
MGU-SSHfolder together). - Double-click
MGU-SSH\MGU-SSH.exe— right-click → Run as administrator for the169.254.x.xENET link.
The app is the whole
MGU-SSHfolder, not a single file — the.exeneeds the_internal,dataandlocalesnext to it, so run it from inside the unzipped folder. Per-car keys and a full session log are saved underMGU-SSH\data\.
Feature release — recommended update from v1.3.x. Adds an in-tool coding backup, programming-mode recovery commands, and a redesigned GUI. Everything from v1.3.x (the ID8/BCP flash-reliability, enroll readback, Windows key-permission, required-variant and discovery-fallback fixes) is included.
New
-
Back up your coding without a second tool —
preflight. A new read-only command reads the MGU's coding over the same ENET cable, before you flash, and writescoding_MGU.txt+backup.json+ aRESTORE.txtunderdata\preflight\. It opens no session, takes no SecurityAccess and sends no write — only0x22reads — so it cannot change the car. Run it before your firstflash. (#53) -
Recovery for a unit stuck in programming mode —
enter-prog/exit-prog. If a flash is interrupted and the head unit is left on the programming screen,exit-progleaves programming mode and reboots it back to normal the same way a completed flash does (deactivate programming mode → finish routine → reset) — a plain reset alone isn't enough.enter-progis the counterpart (puts the unit into the programming session via the proven preamble, no writes). Both are in the GUI under the new Recovery menu. -
Redesigned GUI. A cleaner dark "diagnostic cockpit" layout, with the programming-mode recovery helpers tucked into a Recovery menu so the one-click flow stays simple.
Changed
- No more y/n confirmation prompts.
flash,fix-keyandcloserun without stopping to ask; the GUI's own confirmation dialogs are unchanged. (--yesis still accepted for compatibility and is now a no-op.)
Built from main. As with any flash, the head unit's coding (CAFD) is cleared — restore it from your pre-flash backup (now easier with preflight), and keep a stable 12 V supply connected during flashing.