Skip to content

Releases

Dussek 0.4.0

Choose a tag to compare

@github-actions github-actions released this 10 Nov 17:12
v0.4.0
01999fc

New

  • Weidinger, a second plugin for the brass (trumpet, horn, tenor and bass trombone, tuba), as a
    preview in the same release files: its own standalone and LV2, CLAP and VST3 plugins. The Windows
    installer and the macOS package offer it as a component that can be left out.
  • Analysis and Visualization open with or without the keyboard strip.
  • An instrument folder that is no instrument, or a file that is no Scala scale, says why in the window.
  • The standalone's window has Dussek's icon on Linux and Windows (it had the system's default).

Changed

  • The window shows only the tabs and pedals that act on the instrument, and the keyboard and its panels
    take the width. midi2wav --video draws the same pedals.

Install: Windows: dussek-0.4.0-windows-setup.exe; macOS (Apple silicon):
dussek-0.4.0-macos.pkg; Linux: unpack dussek-0.4.0-linux.tar.gz and run ./install.sh.
dussek-0.4.0-windows-portable.zip and dussek-0.4.0-macos-portable.tar.gz hold the same
files to copy by hand (their README.txt says where). If you tried a test build, remove the
bundles you copied by hand first (dussek.lv2, .clap, .vst3 in %APPDATA%\LV2 or
~/Library/Audio/Plug-Ins): hosts prefer them to the installed ones.

Weidinger, the brass (trumpet, horn, tenor and bass trombone, tuba), comes in the same files as a
preview: its own standalone and plugins, physically modeled from the same sources. The installers
offer it as a component that can be left out; its sound and controls may still change.

Tested on Linux and Windows (the standalone, LV2, CLAP and VST3); the macOS build is untested,
reports welcome. Where a host offers LV2 or CLAP, prefer them to the VST3.

Not signed: Windows' SmartScreen warns about an unknown publisher ("More info", then "Run
anyway"); macOS asks before opening the package (right-click it and choose Open, or System
Settings → Privacy & Security → "Open Anyway").

The code is AGPL-3.0-or-later; each instrument carries its license (CC BY 4.0, or CC BY-SA 4.0
where its folder's LICENSE.md says so).

Dussek 0.3.2

Choose a tag to compare

@github-actions github-actions released this 02 Nov 18:00
v0.3.2
54ce7ff

New

  • "updating…" in the bottom bar while a change is still on its way into the sound (Hammer hardness,
    the felt, another instrument: up to about 2 s on a piano).
  • The Morph tab morphs the harpsichords among themselves and the two harps with each other: the
    chosen harpsichord keeps its registers and stops, each mixed with the partners' of the same pitch.
  • Dussek is on itch.io too (https://ccoors.itch.io/dussek), where the itch app keeps it up to date.

Breaking

  • Hammer hardness reaches +24 dB (was +12 dB). Its automation recorded in a VST3 or CLAP host
    before maps to other values (those hosts store it as a share of the range); LV2 sessions and
    presets keep theirs.

Changed

  • A morph plays each key at the mean of its partners' levels: halfway between Grand A and Grand B
    had a bass up to 2.6 dB louder than either.
  • Release noise starts at −10 dB, as the Pedal ring does (chosen by ear); saved sessions and
    presets keep their own value.

Install: Windows: dussek-0.3.2-windows-setup.exe; macOS (Apple silicon):
dussek-0.3.2-macos.pkg; Linux: unpack dussek-0.3.2-linux.tar.gz and run ./install.sh.
dussek-0.3.2-windows-portable.zip and dussek-0.3.2-macos-portable.tar.gz hold the same
files to copy by hand (their README.txt says where). If you tried a test build, remove the
bundles you copied by hand first (dussek.lv2, .clap, .vst3 in %APPDATA%\LV2 or
~/Library/Audio/Plug-Ins): hosts prefer them to the installed ones.

Tested on Linux and Windows (the standalone, LV2, CLAP and VST3); the macOS build is untested,
reports welcome. Where a host offers LV2 or CLAP, prefer them to the VST3.

Not signed: Windows' SmartScreen warns about an unknown publisher ("More info", then "Run
anyway"); macOS asks before opening the package (right-click it and choose Open, or System
Settings → Privacy & Security → "Open Anyway").

The code is AGPL-3.0-or-later; each instrument carries its license (CC BY 4.0, or CC BY-SA 4.0
where its folder's LICENSE.md says so).

Dussek 0.3.1

Choose a tag to compare

@github-actions github-actions released this 01 Nov 17:09
v0.3.1
463928b

New

  • A tongue drum (Percussion): a steel tongue drum's 15 tongues E3–E5, from new recordings at three
    dynamics; the other tongues ring along ("Ringing tongues").

Changed

  • Upright D: its own key release noise, from new recordings of its keys released without a
    note (it borrowed Grand A's): a low thud, at about the old noise's level. Its A5 at ff from a new,
    unclipped recording.
  • Harpsichord B: the lute stop plays a little under the 8′ II instead of 7 dB over it (its quill
    pulls as hard as the row's: near the nut the string gives way less).

Fixed

  • Linux: the standalone links its outputs to the default output when nothing else does, so it
    plays when started on its own under PipeWire (it was silent there); DUSSEK_AUTOCONNECT=0 turns
    this off.
  • The microphone drawings keep clear of their captions ("from above" ran into the left microphone
    with a bottom panel open; the floor line crossed "from the front").
  • Grand H: no hiss in its room (its room rang 1.4 s from 1.6 kHz up: the strings in its recording's
    gaps read as a room).
  • Linux: instruments installed with install.sh --system are found when $XDG_DATA_DIRS
    leaves out /usr/local/share (NixOS, some desktops).
  • Linux: a failed install.sh lists what it copied, so uninstall.sh or the next install removes
    it; a relative $XDG_DATA_HOME is ignored, as the XDG spec says.
  • dussek render and midi2wav refuse an --input that is no WAV file at once, not after the render.
  • Windows: the installer keeps Dussek in its fixed folder (a plugin's Copy CLI looks for the
    standalone there) and removes the Start menu entry when an update leaves the standalone out.

Install: Windows: dussek-0.3.1-windows-setup.exe; macOS (Apple silicon):
dussek-0.3.1-macos.pkg; Linux: unpack dussek-0.3.1-linux.tar.gz and run ./install.sh.
dussek-0.3.1-windows-portable.zip and dussek-0.3.1-macos-portable.tar.gz hold the same
files to copy by hand (their README.txt says where). If you tried a test build, remove the
bundles you copied by hand first (dussek.lv2, .clap, .vst3 in %APPDATA%\LV2 or
~/Library/Audio/Plug-Ins): hosts prefer them to the installed ones.

Tested on Linux and Windows (the standalone, LV2, CLAP and VST3); the macOS build is untested,
reports welcome. Where a host offers LV2 or CLAP, prefer them to the VST3.

Not signed: Windows' SmartScreen warns about an unknown publisher ("More info", then "Run
anyway"); macOS asks before opening the package (right-click it and choose Open, or System
Settings → Privacy & Security → "Open Anyway").

The code is AGPL-3.0-or-later; each instrument carries its license (CC BY 4.0, or CC BY-SA 4.0
where its folder's LICENSE.md says so).

Dussek 0.3.0

Choose a tag to compare

@github-actions github-actions released this 01 Nov 07:37
v0.3.0
55826be

The first release.

New

  • Nine grands, four uprights, six harpsichords, a clavichord, harps, guitars, zithers and
    percussion, each physically modeled from freely licensed recordings, shipped as numbers.
  • A standalone and LV2, CLAP and VST3 plugins for Linux, Windows and macOS (Apple silicon).
  • Installers: a setup program on Windows, a package on macOS, install.sh on Linux; the
    instruments installed once for every plugin format.

Install: Windows: dussek-0.3.0-windows-setup.exe; macOS (Apple silicon):
dussek-0.3.0-macos.pkg; Linux: unpack dussek-0.3.0-linux.tar.gz and run ./install.sh.
dussek-0.3.0-windows-portable.zip and dussek-0.3.0-macos-portable.tar.gz hold the same
files to copy by hand (their README.txt says where). If you tried a test build, remove the
bundles you copied by hand first (dussek.lv2, .clap, .vst3 in %APPDATA%\LV2 or
~/Library/Audio/Plug-Ins): hosts prefer them to the installed ones.

Tested on Linux and Windows (the standalone, LV2, CLAP and VST3); the macOS build is untested,
reports welcome. Where a host offers LV2 or CLAP, prefer them to the VST3.

Not signed: Windows' SmartScreen warns about an unknown publisher ("More info", then "Run
anyway"); macOS asks before opening the package (right-click it and choose Open, or System
Settings → Privacy & Security → "Open Anyway").

The code is AGPL-3.0-or-later; each instrument carries its license (CC BY 4.0, or CC BY-SA 4.0
where its folder's LICENSE.md says so).