Repository navigation
Releases
ArkLights v1.1.0
ArkLights Firmware v1.1.0
Changes
- Fixed: on boards set up with the calibration wizard, the automatic brake light never came on. It now lights when you slow down.
- Fixed: the automatic turn signal blinked the wrong side. It now blinks the side you are turning toward.
- The automatic brake light now rides out the stop: it stays on while you keep braking, then 1.5 seconds more (adjustable in the next app update). Speeding up or parking turns it off, and turning braking or motion off mid-brake no longer leaves it stuck on.
- Brake sensitivity: Medium (-0.12) is the new default on new and reset boards. Low, Medium and High buttons arrive with the next app update; until then, use the Brake Threshold slider (-0.1 is closest to Medium). A threshold between -0.40 and -0.05 is kept as it is. Anything less sensitive than -0.40, which includes the values the app's install profiles used to set, moves to Medium. Boards on the old default of -0.20 keep it, which is now Low.
- Five brake effects: Flash, Pulse, Solid, Strobe and Fill. They are on the board's web page now and in the app with its next update.
- Brake brightness no longer changes the headlight, and the brake boost respects your ride brightness and the power limit.
- The turn signal is a real amber on the ARKLights controller (it looked yellow-green).
- Colour fixes on the ARKLights controller: the update colours (teal while preparing, a green progress bar, green on success), the low-battery warning (red) and the startup animation now show the colours they should.
- A manual blinker while parked now shows what riders behind you will see: white front, red rear and the amber turn side. Tap Off to go back to your park look. Changing a riding colour from the app while parked previews the riding look for 5 seconds.
- New built-in presets on new and reset boards: Standard, Night, Scanner, Rainbow and Show. Show animates the headlight too, so it is for standing around, not riding. New and reset ARKLights boards park in a breathing rainbow. Boards with saved presets and park looks keep their own.
- Group park sync: parked boards in a group now keep most park animations in step (trail and fire-style effects can still drift). It works between boards on 1.1.0, so a board on older firmware, or one relaying between them, can miss it; boards on older firmware still sync as before.
- Saved presets: new saves stop at 10. A board with more keeps them all. On the current app, a save past 10 can look like it worked until the app refreshes.
- The Motion Logger download now needs the board parked. On the current app, a download from a board that isn't parked can show as complete but empty.
- Fixed: turning direction-based lighting off could leave the brake light dead, or light the headlight red on a manual brake.
- Known issue: direction-based lighting is unreliable. It can swap the front and rear lights and switch the brake light off while riding, so leave it off for now. At High sensitivity, the brake light may flicker on rough roads.
- Known issue: very fast rotation, as on a jump, a ramp or a trick, can briefly light the brake light at any sensitivity.
- Known issue: a turn signal started from the app or a remote keeps blinking if the app or remote disconnects. Reconnect and tap Off.
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download the
arklights-*.binfor your ArkLights controller - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v1.1.0.bin- ArkLights controller firmwaremanifest_*.json- Per-board manifests for app auto-updates (manifest.json= legacy copy of the arklights manifest)NOTICE- Third-party open-source attributions
ArkLights v1.0.4
ArkLights Firmware v1.0.4
Changes
- Group sync now covers park mode: when you stop, every board in the group shows the leader's park look (effect, colors, speed and brightness). Your board still parks on its own, based on its own motion.
- The headlight follows the leader's park look only if headlight sync is on for your board.
- New "Sync park mode with group" setting (on by default) in the Group Sync screen of app 1.0.3 or newer. Turn it off to keep your own park look while riding with a group. Your own park settings are kept either way.
- Fixed: a board slightly ahead of the group at slow effect speeds could jump forward in its animation instead of easing back into step.
- Every board in the group needs 1.0.4 for park sync; boards on older firmware still sync normally while riding.
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download the
arklights-*.binfor your ArkLights controller - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v1.0.4.bin- ArkLights controller firmwaremanifest_*.json- Per-board manifests for app auto-updates (manifest.json= legacy copy of the arklights manifest)NOTICE- Third-party open-source attributions
ArkLights v1.0.3
ArkLights Firmware v1.0.3
Changes
- Group sync now stays in step when boards are parked, braking or blinking. Previously a board sitting still could stop following the group after a minute or so until it was power-cycled.
- Changes made in the app while the group's lead board is parked now reach the rest of the group.
- Brake lights, turn signals and park mode still take over the lights while active; when they end, the board shows the group's current look.
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download the
arklights-*.binfor your ArkLights controller - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v1.0.3.bin- ArkLights controller firmwaremanifest_*.json- Per-board manifests for app auto-updates (manifest.json= legacy copy of the arklights manifest)NOTICE- Third-party open-source attributions
ArkLights v1.0.2
ArkLights Firmware v1.0.2
Changes
- Restores the LED driver used by v1.0.0 and earlier builds. v1.0.1 was built against a newer version of the LED library, which could leave lights stuck on white and the Bluetooth connection unstable. If you are on v1.0.1, update to this release.
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download the
arklights-*.binfor your ArkLights controller - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v1.0.2.bin- ArkLights controller firmwaremanifest_*.json- Per-board manifests for app auto-updates (manifest.json= legacy copy of the arklights manifest)NOTICE- Third-party open-source attributions
ArkLights v1.0.1
ArkLights Firmware v1.0.1
Changes
- Bluetooth firmware updates now complete over the weaker link a controller has when sealed inside the footpad, instead of dropping partway through
- First sync with newer iPhones is faster and more reliable: larger Bluetooth packets, a deeper send buffer, and connection timing iOS accepts
- Turn signals now show true amber instead of a yellow that washed toward white at high brightness
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download the
arklights-*.binfor your ArkLights controller - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v1.0.1.bin- ArkLights controller firmwaremanifest_*.json- Per-board manifests for app auto-updates (manifest.json= legacy copy of the arklights manifest)NOTICE- Third-party open-source attributions
ArkLights v1.0.0
ArkLights Firmware v1.0.0
The first firmware release since the ArkLights app went live on the App Store
and Google Play. Two and a half months of work: motion, safety, updates, and a
lot of hardening.
Motion and lighting
- Rebuilt the motion pipeline. Gravity and rider-motion are now separated
before any decision is made, which is what direction detection, braking and
blinkers all depend on. Previously they shared one noisy signal and the
thresholds fought each other. - Mount-aware orientation. The board works out how it is mounted and
interprets lean and turn relative to that, instead of assuming one fixed
orientation. - Center Hold. Hold the middle section of a linear strip on a solid colour
while the edges keep running the effect. Per strip, configurable width. - Lean glow tuning exposed as live settings rather than compiled-in numbers.
Safety and recovery
- Low-battery detection. A pack that collapses under LED load now parks the
board in a dim red blink and holds there, instead of silently rebooting in a
loop. Recovers on a power cycle with a healthy pack. - Recovery mode is visible and reachable. Slow amber breathing means the
board restarted into recovery after repeated crashes — it is not bricked. Its
Wi-Fi network is suffixed-Rso you can tell it apart, and the recovery
server no longer depends on the LED driver, so it still comes up when the LED
subsystem is the thing that crashed. - Crash diagnostics. The board records why it last reset and shows it,
rather than leaving you guessing between a crash, a brownout and a power cut. - LED power budgeting so a strip at full white cannot pull the supply down.
Updates
- Firmware updates are ~3x faster over Bluetooth and no longer stall
mid-transfer. The old update path erased flash in blocks as it went, freezing
both cores for ~150ms at a time; it now erases once up front and streams. - A progress bar on the strip itself while updating, so you can watch it
from the board rather than the phone. - Updates are verified before they are booted. A truncated or corrupt image
is rejected rather than flashed.
Group sync
- Headlight sync opt-out — keep taillights synced across a group while each
board keeps its own headlight. - Direction handling fixed on single-strip installs, where the taillight is
a section of one continuous strip rather than a separate strip. - Group membership survives a firmware update instead of quietly resetting.
Security
- Destructive actions (firmware updates, factory reset, changing the access
point password) now require proving you know the board's password. - Optional 4-digit connection PIN, off by default.
- Fixed the settings endpoint returning the access point password and PIN to
anyone who asked. - Fixed a bug where applying Wi-Fi settings rebooted the board before saving
them, losing the new password every time.
Housekeeping
- Automated test suite (42 tests) covering the Bluetooth frame codec and the
boot/recovery decision logic, run on every change. - Build-time guard that fails if a firmware image outgrows its update slot.
- Third-party attributions (
NOTICE) now ship with every release.
Installation
Via App (Recommended): open the ArkLights app, go to Settings → Firmware Update, tap "Check for Updates", and follow the prompts.
Manual: download arklights-v1.0.0.bin and upload it from the app's manual-update option, or over the board's local Wi-Fi page.
Files
arklights-v1.0.0.bin— ArkLights controller firmwaremanifest_*.json— per-board manifests for app auto-updatesNOTICE— third-party open-source attributions
ArkLights v0.12.0
ArkLights Firmware v0.12.0
Changes\n- Bug fixes and improvements
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download
arklights-v0.12.0.bin - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v0.12.0.bin- Firmware binarymanifest.json- For app auto-updates
ArkLights v0.10.6
ArkLights Firmware v0.10.6
fixing a bug with reverse installed leds and group sync
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download
arklights-v0.10.6.bin - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v0.10.6.bin- Firmware binarymanifest.json- For app auto-updates
ArkLights v0.10.5
ArkLights Firmware v0.10.5
Fixing some sync logic for smoother group sync
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download
arklights-v0.10.5.bin - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v0.10.5.bin- Firmware binarymanifest.json- For app auto-updates
ArkLights v0.10.4
ArkLights Firmware v0.10.4
more audio effects
Installation
Via App (Recommended):
- Open the ArkLights app
- Go to Settings > Firmware Update
- Tap "Check for Updates"
- Follow the prompts to download and install
Manual Installation:
- Download
arklights-v0.10.4.bin - Connect to your device's WiFi (ARKLIGHTS-AP)
- Go to
http://192.168.4.1in your browser - Navigate to Settings > OTA Updates
- Upload the .bin file
Files
arklights-v0.10.4.bin- Firmware binarymanifest.json- For app auto-updates