Skip to content

POD Go NAM Manager 1.2.2 + CF12

Latest

Choose a tag to compare

@conr4d86 conr4d86 released this 18 Nov 08:30

POD Go NAM Manager 1.2.2 para Windows · CF12 Serie

pod-go-nam-manager-1 2 2-collage-4k

Descargar el EXE / Download the EXE · ☕ Invítame a un café / Buy me a coffee

Español

Qué cambia en 1.2.2

  • Presupuesto DSP corregido en el Custom Editor. El selector tiene en cuenta la reserva fija del preset y pone en gris los modelos que superarían el límite. Muestra el total que resultaría, el límite de 9.000 unidades y cuántas faltarían. La comprobación incluyó Pitch/Synth, Modulación, Delay y Overdrive/Distorsión. Por ejemplo, al sustituir Chorus por Dual Pitch en un preset Dual NAM como el 17C de prueba, el total sería 9.026 y faltarían 26 unidades.
  • Guardado de presets. Una animación centrada bloquea la edición durante la escritura. El mensaje «Guardando…» sigue visible en el pie del editor.
  • Recarga y diagnóstico A/B. El icono de recarga junto a Custom Editor vuelve a leer el preset activo desde la POD Go. Si una edición A/B queda sin verificar, el registro local ayuda a distinguir un fallo de escritura de un fallo de confirmación.
  • Identificación de los bloques NAM. Las letras del bloque NAM A2 Lite de amplificador van en rojo y las del bloque NAM A2 Lite FX en amarillo. La ficha de FX describe las capturas A2 Lite de 48 kHz y cómo el parámetro Model selecciona una captura del banco IR / NAM.

Descarga e instalación

  • Si ya tienes CF12 Serie, abre el EXE de 1.2.2. El firmware incluido coincide con el de 1.2.1.
  • Si vas a instalar CF12 Serie, haz primero un backup con POD Go Edit. Cierra POD Go Edit y Line 6 Central antes de abrir el Manager. Conecta la pedalera por USB, abre Firmware / Restaurar y sigue los pasos de instalación. Al completar la verificación por USB, el Manager muestra «Instalación completada» y «CF NAM Conr4d v12». Comprueba el audio en la pedalera.
  • Esta versión permite usar NAM A2 Lite FX y NAM A2 Lite Amp en Serie. Para comunicar un fallo, indica el modelo de efecto, el mensaje de error y qué bloques tenía el preset. Abrir una incidencia

Si el Manager te resulta útil, puedes apoyar el desarrollo. ☕ Invítame a un café

English

What’s new in 1.2.2

  • Corrected DSP budget in the Custom Editor. The model picker includes the preset’s fixed reserve and dims models that would exceed the limit. It shows the resulting total, the 9,000-unit limit, and the shortfall. Checks covered Pitch/Synth, Modulation, Delay, and Overdrive/Distortion. For example, replacing Chorus with Dual Pitch in the Dual NAM test preset 17C would use 9,026 units, which is 26 over the limit.
  • Preset saves. A centered progress indicator locks editing during the write. The editor footer continues to show “Saving…”.
  • Reload and A/B diagnostics. The reload icon next to Custom Editor rereads the active preset from the POD Go. If an A/B edit cannot be verified, the local log helps distinguish a write failure from a readback failure.
  • NAM block identification. The NAM A2 Lite amp lettering is red and the NAM A2 Lite FX lettering is yellow. The FX info card describes 48 kHz A2 Lite captures and how the Model parameter selects a capture from the IR / NAM bank.

Download and installation

  • Already running CF12 Series? Open the 1.2.2 EXE. It includes the same firmware as 1.2.1.
  • Installing CF12 Series? Back up with POD Go Edit first. Close POD Go Edit and Line 6 Central before opening the Manager. Connect the POD Go over USB, open Firmware / Restore, and follow the installation prompts. After USB verification, the Manager shows “Installation complete” and “CF NAM Conr4d v12”. Check audio on the device.
  • This version runs NAM A2 Lite FX and NAM A2 Lite Amp in Series. When reporting a problem, include the effect model, the error message, and the blocks in the preset. Open an issue

If you find the Manager useful, you can support its development. ☕ Buy me a coffee

SHA-256

7b402707c33064521d56ca023e5b6ea8bba0460584a38eb260664ed515238230