2.0.0-ws397

CrossShare for Waveshare ESP32-S3-ePaper-3.97, ported onto upstream CrossPoint 2.0.0.

2.0.0rc-ws397.1

CrossPoint 2.0.0rc ported to the Waveshare ESP32-S3-ePaper-3.97 (ws397), now branded CrossShare.

Release candidate: published as a prerelease, so on-device OTA does not offer it. Install over USB or from https://cross-share.fizban.net/ (see the fork README).

Fork changes since 2.0.0rc-ws397:

• New CrossShare name and logo on the boot and sleep screens and in the web UI
• Hotspot is now named CrossShare; the router hostname is now CrossShare-<MAC>; the USB name is now CrossShare
• The web address is unchanged: http://crosspoint.local

2.0.0rc-ws397

CrossPoint 2.0.0rc ported to the Waveshare ESP32-S3-ePaper-3.97 (ws397).

Release candidate: published as a prerelease, so on-device OTA does not offer it. Install over USB (see the fork README). Devices running this build will be offered the final 2.0.0-ws397 through OTA.

Based on upstream 2.0.0rc; see its notes for new features. Noto Serif is now an optional SD-card font: install it from Manage Fonts if you use it.

Fork changes since 1.6.5-ws397.1:

• OTA treats <x.y.z>rc versions as release candidates
• Port script detects revision tags correctly

1.6.5-ws397.1

Fork revision 1 on upstream CrossPoint 1.6.5 for the Waveshare ESP32-S3-ePaper-3.97.

Changes

• Button hints now match the 3.97's keys: Back appears bottom-left (BOOT key), Confirm bottom-right (OK on the rocker). The Left/Right hints are gone because the board has no such keys.
• On-device OTA now checks this fork's releases instead of upstream, and understands -ws397.N revisions.

Install

Builds older than this one check upstream for OTA, so flash this release over USB once (see the fork README):

esptool.py --chip esp32s3 erase_region 0xe000 0x2000
esptool.py --chip esp32s3 write_flash 0x10000 crosspoint-1.6.5-ws397.1.bin

Later releases can then be installed with the on-device OTA update.

1.6.5 + Waveshare 3.97

Upstream CrossPoint 1.6.5 with Waveshare ESP32-S3-ePaper-3.97 support. Flash over USB; in-device updates are not supported.