Skip to content

Releases

v0.0.32-alpha

Choose a tag to compare

@github-actions github-actions released this 17 Nov 14:53

Added

  • G915, G915 TKL and G815: Save to keyboard, with Dim after, Dim to and Turn off after. The lighting goes into the keyboard's onboard profile, so it stays without G-Lite. G-Lite backs up the profile first, and Backups can restore an earlier one or the factory lighting. Tried on a G915 TKL.
  • MX keyboards: how long the backlight stays on before it fades, with your hands away, with your hands near and while plugged in (Fades after, from 5 s to 1 h). Like the other settings, your choice is kept and sent again when the keyboard comes back.

Changed

  • MX keyboards: the note under Backlight now says the keys light up at the next keypress only when the keyboard is plugged in. On battery, the MX Keys S lights at once and its hand sensor works.
  • The G915 TKL is marked Works: an owner tried it.

Fixed

  • G915 and G915 TKL: after the keyboard turned itself off, G-Lite's lighting changes didn't show until it was turned off and on. G-Lite now wakes its lighting with each change. Tested on a G915 TKL.
  • G915, G915 TKL and the other keyboards G-Lite sets live: the picture shows the ISO layout on ISO keyboards, and the G915 TKL's brightness and media keys sit where they are on the keyboard.

v0.0.31-alpha

Choose a tag to compare

@github-actions github-actions released this 17 Nov 10:30

Changed

  • No more dots between words: headings, status lines, menus and the device report use commas, colons and brackets instead, like "Lighting (as on the keyboard)" and "Set by G-Lite, not saved to the keyboard".
  • The demo (--demo) shows each device's real connection (LIGHTSPEED, USB, Bolt) instead of "Demo", and no "demo" next to the title.
  • The G213 is marked Works and the G512 X 75 Partial: both were tried by their owners.
  • MX keyboards: while the backlight is off, Automatic shows as off. Under Backlight, the screen says the keys light up when you next type: turned on, the MX Keys S stays dark until a key is pressed.
  • Switches that can't be changed look faded, like the sliders.
  • MX devices: the status line no longer repeats that buttons, gestures and per-app settings stay in Logi Options+.

Fixed

  • Litra Beam LX and G560: presets now keep the Screen effect and its areas. Turning the Screen effect on, or changing its areas, monitor, colour boost or update rate, enables Update; before, it stayed greyed out.
  • Picking a preset while the Screen effect runs also sets its update rate and shows its monitor.
  • Two backups taken in the same millisecond no longer share a file name, so the second can't replace the first.

v0.0.30-alpha

Choose a tag to compare

@github-actions github-actions released this 16 Nov 16:05

Added

  • Save to mouse on the G502 HERO, G303 and G502 Proteus Spectrum. Their onboard profiles have the same layout as the G Pro Wireless's, so G-Lite saves them the same way, with a backup first and a read-back after. A HERO that has only ever run its factory profile gets its first profile set up, as the G305 does. Untested on a real mouse.
  • The G5, G9, G700 and G700s get the mouse screen: DPI and report rate, set while G-Lite runs, not saved to the mouse. The G700 and G700s on their cable or through their own receiver, where they used to show as asleep. Untested on real mice.
  • The G500 and G500s get the mouse screen: DPI and DPI stage (up to 8200 on the G500s), report rate, profiles and Save to mouse, the same way as the G9x. Untested on a real mouse.

Fixed

  • MX keyboards: after the brightness keys had been used, G-Lite showed Automatic backlight as off, and changing the backlight could leave it dark. It now shows Automatic, shows the level that's lit, and turning Automatic off keeps that level (or a middle one) instead of turning the backlight off.
  • MX mice: the SmartShift threshold is kept when the mouse turns off and on again, instead of going back to its old value (or turning SmartShift back on).
  • G9x, G500 and G500s: saving only ever writes the mouse's own profile pages, never its factory ones; a profile list is read only up to its end; and if a save fails halfway, G-Lite puts the profile back as it was instead of leaving a half-written one.
  • Litra Beam LX: Try effect's two-colour effect uses the Speed slider's period instead of 50 ms.
  • A device's firmware version is the one it runs, when it has more than one.
  • Every keyboard picture now has an ISO version, shown when the keyboard reports an ISO layout: the G915, G815, G512 X and the other newer keyboards used to show the US layout. The ISO Enter is drawn as one L-shaped key instead of two.
  • The G213's picture matches the keyboard: the numpad's + and Enter are two rows tall, the game mode and light buttons sit above Print Screen and Pause, mute and the volume rocker above the numpad, and play/pause, stop, back and forward in the function row.
  • The G213's light button turns the backlight off inside the keyboard, where G-Lite can't see or undo it. Its screen now says to press that button when the keys stay dark.
  • On a mouse running its factory profile, buttons set to DPI shift, DPI up, DPI down or other built-in functions show their name instead of "Special 07". Cycle profile, Default DPI, Scroll up and Scroll down are named too, and the G502 HERO's buttons get their names (Sniper, G7, G8…).
  • Try effect on the Litra Beam LX sends the smooth colour cycle and smooth colour wave the way the keyboards take them. Before, the light ignored them. Untested on a real light.

v0.0.29-alpha

Choose a tag to compare

@github-actions github-actions released this 16 Nov 11:20

Changed

  • With no preset picked, the button next to the presets is now New…, which saves the current settings as a new preset, instead of a disabled Update. The preset list is a little narrower, so on a mouse Cancel no longer runs into the Settings and Buttons switch while you name a preset.

Fixed

  • The preset you picked on a device is no longer forgotten when G-Lite quits. It's picked again at the next start, in the tray too, and set on the device if it no longer has it: a G515 or mouse goes back to the lighting saved on it when the preset wasn't saved. If you changed the settings after picking it, your changes are kept and the preset shows its dot.

v0.0.28-alpha

Choose a tag to compare

@github-actions github-actions released this 15 Nov 19:24

Added

  • Older G mice and keyboards are listed even when they don't answer G-Lite's usual protocol, so their owners can send a report: the G5, G9, G9x, G500, G500s, G700, G700s, G300, G400, G400s, G100s, G600 and MX518 mice, and the G11, G13, G15, G19, G103, G105, G110 and G710 keyboards. They get the info page for now. Untested on real devices.

Changed

  • The tray icon's hover popup looks more like Windows' own tray tooltips: smaller corners, and the tooltip colours of the taskbar's theme. It now sits over the icon and stays put while the mouse moves over it, instead of following the cursor.

v0.0.27-alpha

Choose a tag to compare

@github-actions github-actions released this 15 Nov 16:03

Added

  • The G213 ("Gaming Keyboard G213") is recognised and gets a lighting screen: the whole keyboard, or each of its five areas (left to right) in Static. Effects a zone can't do are greyed out. Tested on a real G213.
  • The G213 gets Wave, with its direction, and a key picture that shows each zone's lighting. Click a key to pick its zone. It can't store lighting, so G-Lite sets it again at each start.
  • The G510 and G510s get a screen: the backlight Off, Static, Breathe or Cycle, its colour, brightness and speed, and presets. Breathe and Cycle are run by G-Lite, so they stop when it quits. Built from an owner's report, untested on a real keyboard.
  • Devices on a USB cable without a battery, like the G213, show a USB symbol where the battery goes: in the sidebar, the tray menu, the tray popup and on the device's screen.

Fixed

  • Try effect on the Litra Beam LX no longer fails with HID++ error 0x05: G-Lite now takes control of the light's effects before sending one, and gives it back on Back to G-Lite's colours.
  • On the G515, G915, G512 X and other per-key keyboards, a preset now shows it was changed, and Update turns on, after changing the brightness or the Screen effect's settings (monitor, areas, color boost, update rate, smoothing, pauses). Trying to save a preset under a name that's taken now says to use Update.

v0.0.26-alpha

Choose a tag to compare

@github-actions github-actions released this 13 Nov 16:36

Fixed

  • A headset charging over USB is no longer listed a second time as its "Battery Charger".
  • While a headset charges, its screen and its report show the same battery estimate as the sidebar, instead of a higher one read from the voltage alone.

v0.0.25-alpha

Choose a tag to compare

@github-actions github-actions released this 13 Nov 16:05

Added

  • The log shows the updates: each check's result, the download and its checksum, replacing the exe, failures, Skip and Restart, and removing the old exe at the next start.
  • Logitech devices that aren't G devices (MX mice and keyboards, the MX Creative Keypad and others) get a screen for their settings: pointer speed, SmartShift, inverted scrolling, the thumb wheel's direction, the backlight, brightness and Easy-Switch, which asks before it switches. What you change is set again when the device comes back. Untested on a real device.
  • Reports read SmartShift (0x2110, 0x2111), the thumb wheel (0x2150), the backlight (0x1982) and Easy-Switch (0x1814, and 0x1815 without the computers' names).
  • Devices paired to a Bolt receiver are listed: its pairings are read the way Bolt keeps them. Untested on a real Bolt receiver.

v0.0.24-alpha

Choose a tag to compare

@github-actions github-actions released this 13 Nov 09:32

Added

  • Older G keyboards that light up through 0x8070 (G512, G513, G PRO keyboard, G810, G910, G410, G413, G213) get a lighting screen: Off, Static, Breathe and Cycle, on all zones or each one, with presets. Live only, and untested on a real keyboard.
  • Newer G mice (PRO X SUPERLIGHT 2, PRO X 2, G502 X and others with 0x2202) open on the mouse screen: DPI, the DPI stages saved on the mouse and the report rate up to 8000 Hz. Nothing is saved to them yet. Untested on a real mouse.
  • Other G keyboards with 0x8071 lighting (G915 X, G713, G715, PRO X TKL, PRO X 60, G512 X 98 and more) get live lighting, with a key picture picked from their name. Untested on real keyboards.
  • G headsets G-Lite can't talk to yet (G735, PRO X 2, G522, A50 X and others) show up in the sidebar, so their owners can send a report.
  • The G815 opens on the G915's screen.
  • The G915's logo, brightness key, media keys and G keys have their light ids, so the key picture and the Screen effect reach them.
  • Reports read the newer mice's DPI (0x2202) and report rate (0x8061).
  • The Litra screen has a Live on the light picture, like the keyboards and mice: the front light's warmth and brightness and the back light's seven zones, with the running effect. A click on a zone picks it.
  • The Litra Beam LX has Try effect, which runs the light's own effects one at a time, so an owner can tell which ones light the back light. Reports read where each of its lighting groups sits.

Changed

  • The G560's zones are named Bottom left, Bottom right, Top left and Top right, as an owner found them.
  • The G515 RAPID TKL no longer gets Save to keyboard: its onboard profile isn't known to match the G515's, so it gets live lighting.
  • Report rates of 1000 Hz and up read 1k, 2k, 4k and 8k.
  • A selected option that is greyed out is easier to read.
  • The Litra's status line says its effects stop if you quit G-Lite, not when you close it: closing only hides G-Lite in the tray.

Fixed

  • The Litra and speaker screens could hit an error when the device dropped out while a colour was being sent.
  • On a mouse G-Lite can't save to, moving the DPI slider renamed the current DPI stage button.

v0.0.23-alpha

Choose a tag to compare

@github-actions github-actions released this 12 Nov 22:38

Added

  • An Update screen with the new version, its date and what changed since yours. An Update available row in the sidebar opens it, and so does Check for updates in Settings.
  • Updates show their progress, and a failed one says why and offers Try again.
  • With --demo, the update check finds a pretend version, so the Update screen can be tried without installing anything.

Changed

  • G-Lite no longer restarts by itself after an update, automatic ones included. The sidebar shows Restart G-Lite, and until you click it the old version keeps running. The next start runs the new one anyway.
  • The device list scrolls when it doesn't fit, and fades at an edge with more devices beyond it.