Merge tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY / Thunderbolt fixes from Greg KH:
 "Here are a number of reverts, fixes, and new device ids for 6.7-rc3
  for the USB, PHY, and Thunderbolt driver subsystems. Include in here
  are:

   - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
     have been merged yet, the author is reworking them based on review
     comments as they were using older apis that shouldn't be used
     anymore for newer drivers

   - small thunderbolt driver fixes for reported issues

   - USB driver fixes for a variety of small issues in dwc3, typec,
     xhci, and other smaller drivers.

   - new device ids for usb-serial and onboard_usb_hub drivers.

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
  USB: serial: option: add Luat Air72*U series products
  USB: dwc3: qcom: fix ACPI platform device leak
  USB: dwc3: qcom: fix software node leak on probe errors
  USB: dwc3: qcom: fix resource leaks on probe deferral
  USB: dwc3: qcom: simplify wakeup interrupt setup
  USB: dwc3: qcom: fix wakeup after probe deferral
  dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
  usb: misc: onboard-hub: add support for Microchip USB5744
  dt-bindings: usb: microchip,usb5744: Add second supply
  usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
  USB: serial: option: add Fibocom L7xx modules
  USB: xhci-plat: fix legacy PHY double init
  usb: typec: tipd: Supply also I2C driver data
  usb: xhci-mtk: fix in-ep's start-split check failure
  usb: dwc3: set the dma max_seg_size
  usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
  usb: dwc3: add missing of_node_put and platform_device_put
  USB: dwc2: write HCINT with INTMASK applied
  usb: misc: ljca: Drop _ADR support to get ljca children devices
  usb: cdnsp: Fix deadlock issue during using NCM gadget
  ...

Author: torvalds

Documentation/devicetree/bindings/usb/microchip,usb5744.yaml

@@ -36,7 +36,11 @@ properties:
 
   vdd-supply:
     description:
-      VDD power supply to the hub
+      3V3 power supply to the hub
+
+  vdd2-supply:
+    description:
+      1V2 power supply to the hub
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -62,6 +66,7 @@ allOf:
       properties:
         reset-gpios: false
         vdd-supply: false
+        vdd2-supply: false
         peer-hub: false
         i2c-bus: false
     else:

Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

@@ -521,8 +521,8 @@ examples:
 
             interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
+                         <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
             interrupt-names = "hs_phy_irq", "ss_phy_irq",
                           "dm_hs_phy_irq", "dp_hs_phy_irq";
 

Documentation/devicetree/bindings/usb/usb-hcd.yaml

@@ -41,7 +41,7 @@ examples:
   - |
     usb {
         phys = <&usb2_phy1>, <&usb3_phy1>;
-        phy-names = "usb";
+        phy-names = "usb2", "usb3";
         #address-cells = <1>;
         #size-cells = <0>;
 

drivers/phy/Kconfig

@@ -87,7 +87,6 @@ source "drivers/phy/motorola/Kconfig"
 source "drivers/phy/mscc/Kconfig"
 source "drivers/phy/qualcomm/Kconfig"
 source "drivers/phy/ralink/Kconfig"
-source "drivers/phy/realtek/Kconfig"
 source "drivers/phy/renesas/Kconfig"
 source "drivers/phy/rockchip/Kconfig"
 source "drivers/phy/samsung/Kconfig"

drivers/phy/Makefile

@@ -26,7 +26,6 @@ obj-y					+= allwinner/	\
 					   mscc/	\
 					   qualcomm/	\
 					   ralink/	\
-					   realtek/	\
 					   renesas/	\
 					   rockchip/	\
 					   samsung/	\