net: phy: aquantia: add support for aqr115c

Add support for a new model to the Aquantia driver. This PHY supports
2.5 gigabit speeds. The PHY mode is referred to by the manufacturer as
Overclocked SGMII (OCSGMII) but this actually is just 2500BASEX without
in-band signalling so reuse the existing mode to avoid changing the
uAPI.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Author: Bartosz Golaszewski

drivers/net/phy/aquantia/aquantia_main.c

@@ -29,6 +29,7 @@
 #define PHY_ID_AQR113	0x31c31c40
 #define PHY_ID_AQR113C	0x31c31c12
 #define PHY_ID_AQR114C	0x31c31c22
+#define PHY_ID_AQR115C	0x31c31c33
 #define PHY_ID_AQR813	0x31c31cb2
 
 #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
@@ -1005,6 +1006,30 @@ static struct phy_driver aqr_driver[] = {
 	.led_hw_control_get = aqr_phy_led_hw_control_get,
 	.led_polarity_set = aqr_phy_led_polarity_set,
 },
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR115C),
+	.name           = "Aquantia AQR115C",
+	.probe          = aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init    = aqr113c_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr    = aqr_config_intr,
+	.handle_interrupt = aqr_handle_interrupt,
+	.read_status    = aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend        = aqr107_suspend,
+	.resume         = aqr107_resume,
+	.get_sset_count = aqr107_get_sset_count,
+	.get_strings    = aqr107_get_strings,
+	.get_stats      = aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+	.led_brightness_set = aqr_phy_led_brightness_set,
+	.led_hw_is_supported = aqr_phy_led_hw_is_supported,
+	.led_hw_control_set = aqr_phy_led_hw_control_set,
+	.led_hw_control_get = aqr_phy_led_hw_control_get,
+	.led_polarity_set = aqr_phy_led_polarity_set,
+},
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
 	.name		= "Aquantia AQR813",
@@ -1048,6 +1073,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR115C) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
 	{ }
 };