Merge tag 'imx-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.15, 2nd round:

- One more i.MX8MP nominal drive mode DT fix from Ahmad Fatoum to use
  800MHz NoC OPP
- A imx8mp-var-som DT change from Himanshu Bhavani to fix SD card
  timeout caused by LDO5

* tag 'imx-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout
  arm64: dts: imx8mp: use 800MHz NoC OPP for nominal drive mode

Link: https://lore.kernel.org/r/aB6h/woeyG1bSo12@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Author: arndb

arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi

@@ -88,3 +88,5 @@
 			       <0>, <0>, <400000000>,
 			       <1039500000>;
 };
+
+/delete-node/ &{noc_opp_table/opp-1000000000};

arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi

@@ -35,7 +35,6 @@
 		      <0x1 0x00000000 0 0xc0000000>;
 	};
 
-
 	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 	        compatible = "regulator-fixed";
 	        regulator-name = "VSD_3V3";
@@ -46,6 +45,16 @@
 	        startup-delay-us = <100>;
 	        off-on-delay-us = <12000>;
 	};
+
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "VSD_VSEL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0x0 1800000 0x1>;
+		vin-supply = <&ldo5>;
+	};
 };
 
 &A53_0 {
@@ -205,6 +214,7 @@
         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
         cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
         vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
         bus-width = <4>;
         status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -1645,6 +1645,12 @@
 					opp-hz = /bits/ 64 <200000000>;
 				};
 
+				/* Nominal drive mode maximum */
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+
+				/* Overdrive mode maximum */
 				opp-1000000000 {
 					opp-hz = /bits/ 64 <1000000000>;
 				};