Merge tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for OneXPlayer mini AMD sensors

   - Ampere's Altra smpro-hwmon driver

  New chip and attribute support in existing drivers:

   - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M

   - pmbus/ltc2978: Support for LTC7132

   - aquacomputer_d5next: Support for temperature sensor offsets and
     flow sensor pulses

   - coretemp: Support for dynamic ttarget and tjmax

  Improvements:

   - Use devm_regulator_get_enable() where appropriate

   - Use sysfs_emit() instead of scnprintf()

   - Remove some useless #include <linux/hwmon-vid.h>

   - Include <linux/kstrtox.h> when appropriate

   - Use simple i2c probe

   - it87: Check for a valid chip before using force_id, and new new
     module parameter to ignore ACPI resource conflicts

   - jc42: Use regmap, and restore min/max/critical temperatures on
     resume

   - Add reporting power good and status to PMBus based regulators

  Last minute fixes:

   - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
     manually if THERMAL is enabled

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  hwmon: (emc2305) fix pwm never being able to set lower
  hwmon: (emc2305) fix unable to probe emc2301/2/3
  hwmon: (dell-smm) Move error message to make probing silent
  hwmon: use sysfs_emit() to instead of scnprintf()
  hwmon: (oxp-sensors) Fix pwm reading
  hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
  hwmon: (pmbus/core) Implement regulator get_status
  hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
  hwmon: (gsc-hwmon) Switch to flexible array to simplify code
  hwmon: (pmbus) Add power good support
  hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
  hwmon: (coretemp) Add support for dynamic ttarget
  hwmon: (coretemp) Add support for dynamic tjmax
  hwmon: (coretemp) rearrange tjmax handing code
  hwmon: Remove some useless #include <linux/hwmon-vid.h>
  hwmon: (coretemp) Remove obsolete temp_data->valid
  hwmon: add OneXPlayer mini AMD sensors driver
  hwmon: (aquacomputer_d5next) Clear up macros and comments
  hwmon: (it87) Add DMI table for future extensions
  hwmon: Include <linux/kstrtox.h> when appropriate
  ...

Author: torvalds

Documentation/hwmon/aquacomputer_d5next.rst

@@ -39,7 +39,7 @@ current.
 
 The Quadro exposes four physical and sixteen virtual temperature sensors, a flow
 sensor and four PWM controllable fans, along with their speed (in RPM), power,
-voltage and current.
+voltage and current. Flow sensor pulses are also available.
 
 The Farbwerk and Farbwerk 360 expose four temperature sensors. Additionally,
 sixteen virtual temperature sensors of the Farbwerk 360 are exposed.
@@ -62,7 +62,9 @@ Sysfs entries
 
 ================ ==============================================================
 temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
+temp[1-4]_offset Temperature sensor correction offset (in millidegrees Celsius)
 fan[1-8]_input   Pump/fan speed (in RPM) / Flow speed (in dL/h)
+fan5_pulses      Quadro flow sensor pulses
 power[1-8]_input Pump/fan power (in micro Watts)
 in[0-7]_input    Pump/fan voltage (in milli Volts)
 curr[1-8]_input  Pump/fan current (in milli Amperes)

Documentation/hwmon/index.rst

@@ -160,6 +160,7 @@ Hardware Monitoring Kernel Drivers
    nzxt-kraken2
    nzxt-smart2
    occ
+   oxp-sensors
    pc87360
    pc87427
    pcf8591
@@ -187,6 +188,7 @@ Hardware Monitoring Kernel Drivers
    sis5595
    sl28cpld
    smm665
+   smpro-hwmon
    smsc47b397
    smsc47m192
    smsc47m1

Documentation/hwmon/oxp-sensors.rst

@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver oxp-sensors
+=========================
+
+Author:
+    - Joaquín Ignacio Aramendía <samsagax@gmail.com>
+
+Description:
+------------
+
+One X Player devices from One Netbook provide fan readings and fan control
+through its Embedded Controller.
+
+Currently only supports AMD boards from the One X Player and AOK ZOE lineup.
+Intel boards could be supported if we could figure out the EC registers and
+values to write to since the EC layout and model is different.
+
+Supported devices
+-----------------
+
+Currently the driver supports the following handhelds:
+
+ - AOK ZOE A1
+ - OneXPlayer AMD
+ - OneXPlayer mini AMD
+ - OneXPlayer mini AMD PRO
+
+Sysfs entries
+-------------
+
+The following attributes are supported:
+
+fan1_input
+  Read Only. Reads current fan RMP.
+
+pwm1_enable
+  Read Write. Enable manual fan control. Write "1" to set to manual, write "0"
+  to let the EC control de fan speed. Read this attribute to see current status.
+
+pwm1
+  Read Write. Read this attribute to see current duty cycle in the range [0-255].
+  When pwm1_enable is set to "1" (manual) write any value in the range [0-255]
+  to set fan speed.

Documentation/hwmon/smpro-hwmon.rst

@@ -0,0 +1,102 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver Ampere(R)'s Altra(R) SMpro hwmon
+==============================================
+
+Supported chips:
+
+  * Ampere(R) Altra(R)
+
+    Prefix: ``smpro``
+
+    Reference: `Altra SoC BMC Interface Specification`
+
+Author: Thu Nguyen <thu@os.amperecomputing.com>
+
+Description
+-----------
+The smpro-hwmon driver supports hardware monitoring for Ampere(R) Altra(R)
+SoCs based on the SMpro co-processor (SMpro).  The following sensor metrics
+are supported by the driver:
+
+  * temperature
+  * voltage
+  * current
+  * power
+
+The interface provides the registers to query the various sensors and
+their values which are then exported to userspace by this driver.
+
+Usage Notes
+-----------
+
+The driver creates at least two sysfs files for each sensor.
+
+* ``<sensor_type><idx>_label`` reports the sensor label.
+* ``<sensor_type><idx>_input`` returns the sensor value.
+
+The sysfs files are allocated in the SMpro rootfs folder, with one root
+directory for each instance.
+
+When the SoC is turned off, the driver will fail to read registers and
+return ``-ENXIO``.
+
+Sysfs entries
+-------------
+
+The following sysfs files are supported:
+
+* Ampere(R) Altra(R):
+
+  ============    =============  ======  ===============================================
+  Name            Unit           Perm    Description
+  ============    =============  ======  ===============================================
+  temp1_input     millicelsius   RO      SoC temperature
+  temp2_input     millicelsius   RO      Max temperature reported among SoC VRDs
+  temp2_crit      millicelsius   RO      SoC VRD HOT Threshold temperature
+  temp3_input     millicelsius   RO      Max temperature reported among DIMM VRDs
+  temp4_input     millicelsius   RO      Max temperature reported among Core VRDs
+  temp5_input     millicelsius   RO      Temperature of DIMM0 on CH0
+  temp5_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp6_input     millicelsius   RO      Temperature of DIMM0 on CH1
+  temp6_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp7_input     millicelsius   RO      Temperature of DIMM0 on CH2
+  temp7_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp8_input     millicelsius   RO      Temperature of DIMM0 on CH3
+  temp8_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp9_input     millicelsius   RO      Temperature of DIMM0 on CH4
+  temp9_crit      millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp10_input    millicelsius   RO      Temperature of DIMM0 on CH5
+  temp10_crit     millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp11_input    millicelsius   RO      Temperature of DIMM0 on CH6
+  temp11_crit     millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp12_input    millicelsius   RO      Temperature of DIMM0 on CH7
+  temp12_crit     millicelsius   RO      MEM HOT Threshold for all DIMMs
+  temp13_input    millicelsius   RO      Max temperature reported among RCA VRDs
+  in0_input       millivolts     RO      Core voltage
+  in1_input       millivolts     RO      SoC voltage
+  in2_input       millivolts     RO      DIMM VRD1 voltage
+  in3_input       millivolts     RO      DIMM VRD2 voltage
+  in4_input       millivolts     RO      RCA VRD voltage
+  cur1_input      milliamperes   RO      Core VRD current
+  cur2_input      milliamperes   RO      SoC VRD current
+  cur3_input      milliamperes   RO      DIMM VRD1 current
+  cur4_input      milliamperes   RO      DIMM VRD2 current
+  cur5_input      milliamperes   RO      RCA VRD current
+  power1_input    microwatts     RO      Core VRD power
+  power2_input    microwatts     RO      SoC VRD power
+  power3_input    microwatts     RO      DIMM VRD1 power
+  power4_input    microwatts     RO      DIMM VRD2 power
+  power5_input    microwatts     RO      RCA VRD power
+  ============    =============  ======  ===============================================
+
+  Example::
+
+    # cat in0_input
+    830
+    # cat temp1_input
+    37000
+    # cat curr1_input
+    9000
+    # cat power5_input
+    19500000

MAINTAINERS

@@ -15452,6 +15452,12 @@ S:	Maintained
 F:	drivers/mtd/nand/onenand/
 F:	include/linux/mtd/onenand*.h
 
+ONEXPLAYER FAN DRIVER
+M:	Joaquín Ignacio Aramendía <samsagax@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/oxp-sensors.c
+
 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
 L:	linux-mips@vger.kernel.org

drivers/hwmon/Kconfig

@@ -67,6 +67,14 @@ config SENSORS_ABITUGURU3
 	  This driver can also be built as a module. If so, the module
 	  will be called abituguru3.
 
+config SENSORS_SMPRO
+	tristate "Ampere's Altra SMpro hardware monitoring driver"
+	depends on MFD_SMPRO
+	help
+	  If you say yes here you get support for the thermal, voltage,
+	  current and power sensors of Ampere's Altra processor family SoC
+	  with SMpro co-processor.
+
 config SENSORS_AD7314
 	tristate "Analog Devices AD7314 and compatibles"
 	depends on SPI
@@ -799,6 +807,7 @@ config SENSORS_IT87
 config SENSORS_JC42
 	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	  If you say yes here, you get support for JEDEC JC42.4 compliant
 	  temperature sensors, which are used on many DDR3 memory modules for
@@ -1607,6 +1616,17 @@ config SENSORS_NZXT_SMART2
 
 source "drivers/hwmon/occ/Kconfig"
 
+config SENSORS_OXP
+	tristate "OneXPlayer EC fan control"
+	depends on ACPI
+	depends on X86
+	help
+		If you say yes here you get support for fan readings and control over
+		OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
+		boards are supported.
+
+		Can also be built as a module. In that case it will be called oxp-sensors.
+
 config SENSORS_PCF8591
 	tristate "Philips PCF8591 ADC/DAC"
 	depends on I2C

drivers/hwmon/Makefile

@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
 obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o
+obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
@@ -187,6 +188,7 @@ obj-$(CONFIG_SENSORS_SHT4x)	+= sht4x.o
 obj-$(CONFIG_SENSORS_SHTC1)	+= shtc1.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o
+obj-$(CONFIG_SENSORS_SMPRO)	+= smpro-hwmon.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o

drivers/hwmon/adm1177.c

@@ -26,14 +26,12 @@
 /**
  * struct adm1177_state - driver instance specific data
  * @client:		pointer to i2c client
- * @reg:		regulator info for the power supply of the device
  * @r_sense_uohm:	current sense resistor value
  * @alert_threshold_ua:	current limit for shutdown
  * @vrange_high:	internal voltage divider
  */
 struct adm1177_state {
 	struct i2c_client	*client;
-	struct regulator	*reg;
 	u32			r_sense_uohm;
 	u32			alert_threshold_ua;
 	bool			vrange_high;
@@ -189,13 +187,6 @@ static const struct hwmon_chip_info adm1177_chip_info = {
 	.info = adm1177_info,
 };
 
-static void adm1177_remove(void *data)
-{
-	struct adm1177_state *st = data;
-
-	regulator_disable(st->reg);
-}
-
 static int adm1177_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
@@ -210,21 +201,9 @@ static int adm1177_probe(struct i2c_client *client)
 
 	st->client = client;
 
-	st->reg = devm_regulator_get_optional(&client->dev, "vref");
-	if (IS_ERR(st->reg)) {
-		if (PTR_ERR(st->reg) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		st->reg = NULL;
-	} else {
-		ret = regulator_enable(st->reg);
-		if (ret)
-			return ret;
-		ret = devm_add_action_or_reset(&client->dev, adm1177_remove,
-					       st);
-		if (ret)
-			return ret;
-	}
+	ret = devm_regulator_get_enable_optional(&client->dev, "vref");
+	if (ret == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
 
 	if (device_property_read_u32(dev, "shunt-resistor-micro-ohms",
 				     &st->r_sense_uohm))

drivers/hwmon/aht10.c

@@ -289,8 +289,7 @@ static const struct hwmon_chip_info aht10_chip_info = {
 	.info = aht10_info,
 };
 
-static int aht10_probe(struct i2c_client *client,
-		       const struct i2c_device_id *aht10_id)
+static int aht10_probe(struct i2c_client *client)
 {
 	struct device *device = &client->dev;
 	struct device *hwmon_dev;
@@ -336,7 +335,7 @@ static struct i2c_driver aht10_driver = {
 	.driver = {
 		.name = "aht10",
 	},
-	.probe      = aht10_probe,
+	.probe_new  = aht10_probe,
 	.id_table   = aht10_id,
 };