Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflicts are simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

Author: davem330

Documentation/dev-tools/kunit/running_tips.rst

@@ -86,19 +86,7 @@ Generating code coverage reports under UML
 .. note::
 	TODO(brendanhiggins@google.com): There are various issues with UML and
 	versions of gcc 7 and up. You're likely to run into missing ``.gcda``
-	files or compile errors. We know one `faulty GCC commit
-	<https://github.com/gcc-mirror/gcc/commit/8c9434c2f9358b8b8bad2c1990edf10a21645f9d>`_
-	but not how we'd go about getting this fixed. The compile errors still
-	need some investigation.
-
-.. note::
-	TODO(brendanhiggins@google.com): for recent versions of Linux
-	(5.10-5.12, maybe earlier), there's a bug with gcov counters not being
-	flushed in UML. This translates to very low (<1%) reported coverage. This is
-	related to the above issue and can be worked around by replacing the
-	one call to ``uml_abort()`` (it's in ``os_dump_core()``) with a plain
-	``exit()``.
-
+	files or compile errors.
 
 This is different from the "normal" way of getting coverage information that is
 documented in Documentation/dev-tools/gcov.rst.

Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml

@@ -50,7 +50,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 3
     items:
       - description: base register
       - description: power register

Documentation/devicetree/bindings/display/renesas,du.yaml

@@ -92,7 +92,6 @@ required:
   - reg
   - clocks
   - interrupts
-  - resets
   - ports
 
 allOf:

Documentation/devicetree/bindings/hwmon/adt7475.yaml

@@ -39,17 +39,7 @@ properties:
   reg:
     maxItems: 1
 
-patternProperties:
-  "^adi,bypass-attenuator-in[0-4]$":
-    description: |
-      Configures bypassing the individual voltage input attenuator. If
-      set to 1 the attenuator is bypassed if set to 0 the attenuator is
-      not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1]
-
-  "^adi,pwm-active-state$":
+  adi,pwm-active-state:
     description: |
       Integer array, represents the active state of the pwm outputs If set to 0
       the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
@@ -61,6 +51,16 @@ patternProperties:
       enum: [0, 1]
       default: 1
 
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

@@ -52,16 +52,14 @@ properties:
         items:
           - const: marvell,ap806-smmu-500
           - const: arm,mmu-500
-      - description: NVIDIA SoCs that program two ARM MMU-500s identically
-        items:
       - description: NVIDIA SoCs that require memory controller interaction
           and may program multiple ARM MMU-500s identically with the memory
           controller interleaving translations between multiple instances
           for improved performance.
         items:
           - enum:
-              - const: nvidia,tegra194-smmu
-              - const: nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra186-smmu
           - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500

Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml

@@ -28,14 +28,12 @@ properties:
       - description: configuration registers for MMU instance 0
       - description: configuration registers for MMU instance 1
     minItems: 1
-    maxItems: 2
 
   interrupts:
     items:
       - description: interruption for MMU instance 0
       - description: interruption for MMU instance 1
     minItems: 1
-    maxItems: 2
 
   clocks:
     items:

Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml

@@ -57,7 +57,6 @@ properties:
 
   ranges:
     minItems: 1
-    maxItems: 3
     description: |
       Memory bus areas for interacting with the devices. Reflects
       the memory layout with four integer values following:

Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml

@@ -84,15 +84,13 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
     items:
       - description: NAND CTLRDY interrupt
       - description: FLASH_DMA_DONE if flash DMA is available
       - description: FLASH_EDU_DONE if EDU is available
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
     items:
       - const: nand_ctlrdy
       - const: flash_dma_done
@@ -148,8 +146,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: nand
             - const: nand-int-base
@@ -161,8 +157,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 3
-          maxItems: 3
           items:
             - const: nand
             - const: nand-int-base
@@ -175,8 +169,6 @@ allOf:
     then:
       properties:
         reg-names:
-          minItems: 3
-          maxItems: 3
           items:
             - const: nand
             - const: iproc-idm

Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml

@@ -67,8 +67,8 @@ properties:
           reg:
             oneOf:
               - enum:
-                - 0
-                - 1
+                  - 0
+                  - 1
 
         required:
           - compatible

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -77,6 +77,34 @@ properties:
       Type-C spec states minimum CC pin debounce of 100 ms and maximum
       of 200 ms. However, some solutions might need more than 200 ms.
 
+  refclk-dig:
+    type: object
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 4
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
 patternProperties:
   "^pll[0|1]-refclk$":
     type: object
@@ -121,34 +149,6 @@ patternProperties:
       - clocks
       - "#clock-cells"
 
-  "^refclk-dig$":
-    type: object
-    description: |
-      WIZ node should have subnode for refclk_dig to select the reference
-      clock source for the reference clock used in the PHY and PMA digital
-      logic.
-    properties:
-      clocks:
-        minItems: 2
-        maxItems: 4
-        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
-          the inputs to refclk_dig
-
-      "#clock-cells":
-        const: 0
-
-      assigned-clocks:
-        maxItems: 1
-
-      assigned-clock-parents:
-        maxItems: 1
-
-    required:
-      - clocks
-      - "#clock-cells"
-      - assigned-clocks
-      - assigned-clock-parents
-
   "^serdes@[0-9a-f]+$":
     type: object
     description: |