Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
  some reported issues.

  They include:

   - 8250 driver Kconfig issue pointed out by you that showed up in -rc1

   - qcom-geni serial driver fixes

   - various 8250 driver fixes for reported problems

   - fsl_lpuart driver fixes

   - serdev fix for regression in -rc1

   - vt.c bugfix

  All have been in linux-next for over a week with no reported problems"

* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
  serial: qcom-geni: drop bogus uart_write_wakeup()
  serial: qcom-geni: fix mapping of empty DMA buffer
  serial: qcom-geni: fix DMA mapping leak on shutdown
  serial: qcom-geni: fix console shutdown hang
  serdev: Set fwnode for serdev devices
  tty: serial: fsl_lpuart: fix race on RX DMA shutdown
  serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
  serial: 8250_fsl: fix handle_irq locking
  serial: 8250_em: Fix UART port type
  serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
  tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
  Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"

Author: torvalds

drivers/tty/serdev/core.c

@@ -534,7 +534,7 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
 		if (!serdev)
 			continue;
 
-		serdev->dev.of_node = node;
+		device_set_node(&serdev->dev, of_fwnode_handle(node));
 
 		err = serdev_device_add(serdev);
 		if (err) {

drivers/tty/serial/8250/8250_em.c

@@ -106,8 +106,8 @@ static int serial8250_em_probe(struct platform_device *pdev)
 	memset(&up, 0, sizeof(up));
 	up.port.mapbase = regs->start;
 	up.port.irq = irq;
-	up.port.type = PORT_UNKNOWN;
-	up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+	up.port.type = PORT_16750;
+	up.port.flags = UPF_FIXED_PORT | UPF_IOREMAP | UPF_FIXED_TYPE;
 	up.port.dev = &pdev->dev;
 	up.port.private_data = priv;
 

drivers/tty/serial/8250/8250_fsl.c

@@ -34,15 +34,15 @@ int fsl8250_handle_irq(struct uart_port *port)
 
 	iir = port->serial_in(port, UART_IIR);
 	if (iir & UART_IIR_NO_INT) {
-		spin_unlock(&up->port.lock);
+		spin_unlock_irqrestore(&up->port.lock, flags);
 		return 0;
 	}
 
 	/* This is the WAR; if last event was BRK, then read and return */
 	if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
 		up->lsr_saved_flags &= ~UART_LSR_BI;
 		port->serial_in(port, UART_RX);
-		spin_unlock(&up->port.lock);
+		spin_unlock_irqrestore(&up->port.lock, flags);
 		return 1;
 	}
 

drivers/tty/serial/8250/Kconfig

@@ -257,8 +257,9 @@ config SERIAL_8250_ASPEED_VUART
 	tristate "Aspeed Virtual UART"
 	depends on SERIAL_8250
 	depends on OF
-	depends on REGMAP && MFD_SYSCON
+	depends on MFD_SYSCON
 	depends on ARCH_ASPEED || COMPILE_TEST
+	select REGMAP
 	help
 	  If you want to use the virtual UART (VUART) device on Aspeed
 	  BMC platforms, enable this option. This enables the 16550A-
@@ -299,7 +300,6 @@ config SERIAL_8250_PCI1XXXX
 	tristate "Microchip 8250 based serial port"
 	depends on SERIAL_8250 && PCI
 	select SERIAL_8250_PCILIB
-	default SERIAL_8250
 	help
 	 Select this option if you have a setup with Microchip PCIe
 	 Switch with serial port enabled and wish to enable 8250

drivers/tty/serial/Kconfig

@@ -1313,7 +1313,7 @@ config SERIAL_FSL_LPUART
 
 config SERIAL_FSL_LPUART_CONSOLE
 	bool "Console on Freescale lpuart serial port"
-	depends on SERIAL_FSL_LPUART
+	depends on SERIAL_FSL_LPUART=y
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 	help

drivers/tty/serial/fsl_lpuart.c

@@ -1354,6 +1354,7 @@ static void lpuart_dma_rx_free(struct uart_port *port)
 	struct dma_chan *chan = sport->dma_rx_chan;
 
 	dmaengine_terminate_sync(chan);
+	del_timer_sync(&sport->lpuart_timer);
 	dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE);
 	kfree(sport->rx_ring.buf);
 	sport->rx_ring.tail = 0;
@@ -1813,7 +1814,6 @@ static int lpuart32_startup(struct uart_port *port)
 static void lpuart_dma_shutdown(struct lpuart_port *sport)
 {
 	if (sport->lpuart_dma_rx_use) {
-		del_timer_sync(&sport->lpuart_timer);
 		lpuart_dma_rx_free(&sport->port);
 		sport->lpuart_dma_rx_use = false;
 	}
@@ -1973,10 +1973,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Since timer function acqures sport->port.lock, need to stop before
 	 * acquring same lock because otherwise del_timer_sync() can deadlock.
 	 */
-	if (old && sport->lpuart_dma_rx_use) {
-		del_timer_sync(&sport->lpuart_timer);
+	if (old && sport->lpuart_dma_rx_use)
 		lpuart_dma_rx_free(&sport->port);
-	}
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
@@ -2210,10 +2208,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * Since timer function acqures sport->port.lock, need to stop before
 	 * acquring same lock because otherwise del_timer_sync() can deadlock.
 	 */
-	if (old && sport->lpuart_dma_rx_use) {
-		del_timer_sync(&sport->lpuart_timer);
+	if (old && sport->lpuart_dma_rx_use)
 		lpuart_dma_rx_free(&sport->port);
-	}
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
@@ -2240,9 +2236,15 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	/* update the per-port timeout */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	/* wait transmit engin complete */
-	lpuart32_write(&sport->port, 0, UARTMODIR);
-	lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+	/*
+	 * LPUART Transmission Complete Flag may never be set while queuing a break
+	 * character, so skip waiting for transmission complete when UARTCTRL_SBK is
+	 * asserted.
+	 */
+	if (!(old_ctrl & UARTCTRL_SBK)) {
+		lpuart32_write(&sport->port, 0, UARTMODIR);
+		lpuart32_wait_bit_set(&sport->port, UARTSTAT, UARTSTAT_TC);
+	}
 
 	/* disable transmit and receive */
 	lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
@@ -3014,7 +3016,6 @@ static int lpuart_suspend(struct device *dev)
 			 * cannot resume as expected, hence gracefully release the
 			 * Rx DMA path before suspend and start Rx DMA path on resume.
 			 */
-			del_timer_sync(&sport->lpuart_timer);
 			lpuart_dma_rx_free(&sport->port);
 
 			/* Disable Rx DMA to use UART port as wakeup source */

drivers/tty/serial/qcom_geni_serial.c

@@ -596,7 +596,7 @@ static void qcom_geni_serial_stop_tx_dma(struct uart_port *uport)
 	if (!qcom_geni_serial_main_active(uport))
 		return;
 
-	if (port->rx_dma_addr) {
+	if (port->tx_dma_addr) {
 		geni_se_tx_dma_unprep(&port->se, port->tx_dma_addr,
 				      port->tx_remaining);
 		port->tx_dma_addr = 0;
@@ -631,9 +631,8 @@ static void qcom_geni_serial_start_tx_dma(struct uart_port *uport)
 	if (port->tx_dma_addr)
 		return;
 
-	xmit_size = uart_circ_chars_pending(xmit);
-	if (xmit_size < WAKEUP_CHARS)
-		uart_write_wakeup(uport);
+	if (uart_circ_empty(xmit))
+		return;
 
 	xmit_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
 
@@ -1070,6 +1069,10 @@ static int setup_fifos(struct qcom_geni_serial_port *port)
 static void qcom_geni_serial_shutdown(struct uart_port *uport)
 {
 	disable_irq(uport->irq);
+
+	if (uart_console(uport))
+		return;
+
 	qcom_geni_serial_stop_tx(uport);
 	qcom_geni_serial_stop_rx(uport);
 }

drivers/tty/vt/vt.c

@@ -4545,6 +4545,9 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
 	int c;
 	unsigned int vpitch = op->op == KD_FONT_OP_GET_TALL ? op->height : 32;
 
+	if (vpitch > max_font_height)
+		return -EINVAL;
+
 	if (op->data) {
 		font.data = kvmalloc(max_font_size, GFP_KERNEL);
 		if (!font.data)