rtase: Refactor the rtase_check_mac_version_valid() function

Different hardware requires different configurations, but this distinction
was not made previously. Additionally, the error message was not clear
enough. Therefore, this patch will address the issues mentioned above.

Fixes: a36e9f5 ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Author: Justin Lai

drivers/net/ethernet/realtek/rtase/rtase.h

@@ -9,7 +9,10 @@
 #ifndef RTASE_H
 #define RTASE_H
 
-#define RTASE_HW_VER_MASK 0x7C800000
+#define RTASE_HW_VER_MASK     0x7C800000
+#define RTASE_HW_VER_906X_7XA 0x00800000
+#define RTASE_HW_VER_906X_7XC 0x04000000
+#define RTASE_HW_VER_907XD_V1 0x04800000
 
 #define RTASE_RX_DMA_BURST_256       4
 #define RTASE_TX_DMA_BURST_UNLIMITED 7
@@ -327,6 +330,8 @@ struct rtase_private {
 	u16 int_nums;
 	u16 tx_int_mit;
 	u16 rx_int_mit;
+
+	u32 hw_ver;
 };
 
 #define RTASE_LSO_64K 64000

drivers/net/ethernet/realtek/rtase/rtase_main.c

@@ -1972,20 +1972,21 @@ static void rtase_init_software_variable(struct pci_dev *pdev,
 	tp->dev->max_mtu = RTASE_MAX_JUMBO_SIZE;
 }
 
-static bool rtase_check_mac_version_valid(struct rtase_private *tp)
+static int rtase_check_mac_version_valid(struct rtase_private *tp)
 {
-	u32 hw_ver = rtase_r32(tp, RTASE_TX_CONFIG_0) & RTASE_HW_VER_MASK;
-	bool known_ver = false;
+	int ret = -ENODEV;
 
-	switch (hw_ver) {
-	case 0x00800000:
-	case 0x04000000:
-	case 0x04800000:
-		known_ver = true;
+	tp->hw_ver = rtase_r32(tp, RTASE_TX_CONFIG_0) & RTASE_HW_VER_MASK;
+
+	switch (tp->hw_ver) {
+	case RTASE_HW_VER_906X_7XA:
+	case RTASE_HW_VER_906X_7XC:
+	case RTASE_HW_VER_907XD_V1:
+		ret = 0;
 		break;
 	}
 
-	return known_ver;
+	return ret;
 }
 
 static int rtase_init_board(struct pci_dev *pdev, struct net_device **dev_out,
@@ -2105,9 +2106,12 @@ static int rtase_init_one(struct pci_dev *pdev,
 	tp->pdev = pdev;
 
 	/* identify chip attached to board */
-	if (!rtase_check_mac_version_valid(tp))
-		return dev_err_probe(&pdev->dev, -ENODEV,
-				     "unknown chip version, contact rtase maintainers (see MAINTAINERS file)\n");
+	ret = rtase_check_mac_version_valid(tp);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"unknown chip version: 0x%08x, contact rtase maintainers (see MAINTAINERS file)\n",
+			tp->hw_ver);
+	}
 
 	rtase_init_software_variable(pdev, tp);
 	rtase_init_hardware(tp);