dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver

Add Device Tree bindings documentation and an entry in MAINTAINERS file
for Intel Thunder Bay SoC's pin controller.

Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20211201072626.19599-2-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Author: Lakshmi-Sowjanya

Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml

@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay pin controller Device Tree Bindings
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Thunder Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 67 pins.
+
+properties:
+  compatible:
+    const: intel,thunderbay-pinctrl
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO66".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: Drive strength for the pad.
+        enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Slow
+                      1 - Fast
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    pinctrl0: gpio@0 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600b0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl0 0 0 67>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    pinctrl1: gpio@1 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600c0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl1 0 0 53>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };

MAINTAINERS

@@ -15117,6 +15117,11 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/pinctrl/pinctrl-single.c
 
+PIN CONTROLLER - THUNDERBAY
+M:	Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+S:	Supported
+F:	drivers/pinctrl/pinctrl-thunderbay.c
+
 PKTCDVD DRIVER
 M:	linux-block@vger.kernel.org
 S:	Orphan