Merge tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "A few small USB fixes for 6.1-rc3. Include in here are:

   - MAINTAINERS update, including a big one for the USB gadget
     subsystem. Many thanks to Felipe for all of the years of hard work
     he has done on this codebase, it was greatly appreciated.

   - dwc3 driver fixes for reported problems.

   - xhci driver fixes for reported problems.

   - typec driver fixes for minor issues

   - uvc gadget driver change, and then revert as it wasn't relevant for
     6.1-final, as it is a new feature and people are still reviewing
     and modifying it.

  All of these have been in the linux-next tree with no reported issues"

* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Don't set IMI for no_interrupt
  usb: dwc3: gadget: Stop processing more requests on IMI
  Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
  xhci: Remove device endpoints from bandwidth list when freeing the device
  xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
  xhci: Add quirk to reset host back to default state at shutdown
  usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
  usb: dwc3: st: Rely on child's compatible instead of name
  usb: gadget: uvc: limit isoc_sg to super speed gadgets
  usb: bdc: change state when port disconnected
  usb: typec: ucsi: acpi: Implement resume callback
  usb: typec: ucsi: Check the connection on resume
  usb: gadget: aspeed: Fix probe regression
  usb: gadget: uvc: fix sg handling during video encode
  usb: gadget: uvc: fix sg handling in error case
  usb: gadget: uvc: fix dropped frame after missed isoc
  usb: dwc3: gadget: Don't delay End Transfer on delayed_status
  usb: dwc3: Don't switch OTG -> peripheral if extcon is present
  MAINTAINERS: Update maintainers for broadcom USB
  MAINTAINERS: move USB gadget and phy entries under the main USB entry

Author: torvalds

MAINTAINERS

@@ -4101,6 +4101,7 @@ N:	bcm7038
 N:	bcm7120
 
 BROADCOM BDC DRIVER
+M:	Justin Chen <justinpopo6@gmail.com>
 M:	Al Cooper <alcooperx@gmail.com>
 L:	linux-usb@vger.kernel.org
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
@@ -4207,6 +4208,7 @@ F:	Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
 F:	drivers/tty/serial/8250/8250_bcm7271.c
 
 BROADCOM BRCMSTB USB EHCI DRIVER
+M:	Justin Chen <justinpopo6@gmail.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-usb@vger.kernel.org
@@ -4223,6 +4225,7 @@ F:	Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
 F:	drivers/usb/misc/brcmstb-usb-pinmap.c
 
 BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
+M:	Justin Chen <justinpopo6@gmail.com>
 M:	Al Cooper <alcooperx@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-kernel@vger.kernel.org
@@ -21179,15 +21182,6 @@ S:	Maintained
 F:	Documentation/usb/ehci.rst
 F:	drivers/usb/host/ehci*
 
-USB GADGET/PERIPHERAL SUBSYSTEM
-M:	Felipe Balbi <balbi@kernel.org>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-W:	http://www.linux-usb.org/gadget
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-F:	drivers/usb/gadget/
-F:	include/linux/usb/gadget*
-
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 M:	Jiri Kosina <jikos@kernel.org>
 M:	Benjamin Tissoires <benjamin.tissoires@redhat.com>
@@ -21294,13 +21288,6 @@ W:	https://github.com/petkan/pegasus
 T:	git https://github.com/petkan/pegasus.git
 F:	drivers/net/usb/pegasus.*
 
-USB PHY LAYER
-M:	Felipe Balbi <balbi@kernel.org>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-F:	drivers/usb/phy/
-
 USB PRINTER DRIVER (usblp)
 M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org

drivers/usb/dwc3/core.c

@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/acpi.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/reset.h>
@@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
 		 * mode. If the controller supports DRD but the dr_mode is not
 		 * specified or set to OTG, then set the mode to peripheral.
 		 */
-		if (mode == USB_DR_MODE_OTG &&
+		if (mode == USB_DR_MODE_OTG && !dwc->edev &&
 		    (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
 		     !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
 		    !DWC3_VER_IS_PRIOR(DWC3, 330A))
@@ -1690,6 +1691,46 @@ static void dwc3_check_params(struct dwc3 *dwc)
 	}
 }
 
+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+	struct device *dev = dwc->dev;
+	struct device_node *np_phy;
+	struct extcon_dev *edev = NULL;
+	const char *name;
+
+	if (device_property_read_bool(dev, "extcon"))
+		return extcon_get_edev_by_phandle(dev, 0);
+
+	/*
+	 * Device tree platforms should get extcon via phandle.
+	 * On ACPI platforms, we get the name from a device property.
+	 * This device property is for kernel internal use only and
+	 * is expected to be set by the glue code.
+	 */
+	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
+		return extcon_get_extcon_dev(name);
+
+	/*
+	 * Try to get an extcon device from the USB PHY controller's "port"
+	 * node. Check if it has the "port" node first, to avoid printing the
+	 * error message from underlying code, as it's a valid case: extcon
+	 * device (and "port" node) may be missing in case of "usb-role-switch"
+	 * or OTG mode.
+	 */
+	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+	if (of_graph_is_present(np_phy)) {
+		struct device_node *np_conn;
+
+		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+		if (np_conn)
+			edev = extcon_find_edev_by_node(np_conn);
+		of_node_put(np_conn);
+	}
+	of_node_put(np_phy);
+
+	return edev;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
@@ -1840,6 +1881,12 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
+	dwc->edev = dwc3_get_extcon(dwc);
+	if (IS_ERR(dwc->edev)) {
+		ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n");
+		goto err3;
+	}
+
 	ret = dwc3_get_dr_mode(dwc);
 	if (ret)
 		goto err3;

drivers/usb/dwc3/drd.c

@@ -8,7 +8,6 @@
  */
 
 #include <linux/extcon.h>
-#include <linux/of_graph.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
@@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
-{
-	struct device *dev = dwc->dev;
-	struct device_node *np_phy;
-	struct extcon_dev *edev = NULL;
-	const char *name;
-
-	if (device_property_read_bool(dev, "extcon"))
-		return extcon_get_edev_by_phandle(dev, 0);
-
-	/*
-	 * Device tree platforms should get extcon via phandle.
-	 * On ACPI platforms, we get the name from a device property.
-	 * This device property is for kernel internal use only and
-	 * is expected to be set by the glue code.
-	 */
-	if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
-		edev = extcon_get_extcon_dev(name);
-		if (!edev)
-			return ERR_PTR(-EPROBE_DEFER);
-
-		return edev;
-	}
-
-	/*
-	 * Try to get an extcon device from the USB PHY controller's "port"
-	 * node. Check if it has the "port" node first, to avoid printing the
-	 * error message from underlying code, as it's a valid case: extcon
-	 * device (and "port" node) may be missing in case of "usb-role-switch"
-	 * or OTG mode.
-	 */
-	np_phy = of_parse_phandle(dev->of_node, "phys", 0);
-	if (of_graph_is_present(np_phy)) {
-		struct device_node *np_conn;
-
-		np_conn = of_graph_get_remote_node(np_phy, -1, -1);
-		if (np_conn)
-			edev = extcon_find_edev_by_node(np_conn);
-		of_node_put(np_conn);
-	}
-	of_node_put(np_phy);
-
-	return edev;
-}
-
 #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
 #define ROLE_SWITCH 1
 static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
@@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	    device_property_read_bool(dwc->dev, "usb-role-switch"))
 		return dwc3_setup_role_switch(dwc);
 
-	dwc->edev = dwc3_get_extcon(dwc);
-	if (IS_ERR(dwc->edev))
-		return PTR_ERR(dwc->edev);
-
 	if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,

drivers/usb/dwc3/dwc3-st.c

@@ -251,7 +251,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	/* Manage SoftReset */
 	reset_control_deassert(dwc3_data->rstc_rst);
 
-	child = of_get_child_by_name(node, "usb");
+	child = of_get_compatible_child(node, "snps,dwc3");
 	if (!child) {
 		dev_err(&pdev->dev, "failed to find dwc3 core node\n");
 		ret = -ENODEV;

drivers/usb/dwc3/gadget.c

@@ -1292,8 +1292,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 			trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
 		}
 
-		/* always enable Interrupt on Missed ISOC */
-		trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
+		if (!no_interrupt && !chain)
+			trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:
@@ -1698,6 +1698,16 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
 	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
+	/*
+	 * If the End Transfer command was timed out while the device is
+	 * not in SETUP phase, it's possible that an incoming Setup packet
+	 * may prevent the command's completion. Let's retry when the
+	 * ep0state returns to EP0_SETUP_PHASE.
+	 */
+	if (ret == -ETIMEDOUT && dep->dwc->ep0state != EP0_SETUP_PHASE) {
+		dep->flags |= DWC3_EP_DELAY_STOP;
+		return 0;
+	}
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 
@@ -3238,6 +3248,10 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
 	if (event->status & DEPEVT_STATUS_SHORT && !chain)
 		return 1;
 
+	if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) &&
+	    DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC)
+		return 1;
+
 	if ((trb->ctrl & DWC3_TRB_CTRL_IOC) ||
 	    (trb->ctrl & DWC3_TRB_CTRL_LST))
 		return 1;
@@ -3719,7 +3733,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
 	 * timeout. Delay issuing the End Transfer command until the Setup TRB is
 	 * prepared.
 	 */
-	if (dwc->ep0state != EP0_SETUP_PHASE) {
+	if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) {
 		dep->flags |= DWC3_EP_DELAY_STOP;
 		return;
 	}

drivers/usb/gadget/function/uvc_queue.c

@@ -304,6 +304,7 @@ int uvcg_queue_enable(struct uvc_video_queue *queue, int enable)
 
 		queue->sequence = 0;
 		queue->buf_used = 0;
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
 	} else {
 		ret = vb2_streamoff(&queue->queue, queue->queue.type);
 		if (ret < 0)
@@ -329,10 +330,11 @@ int uvcg_queue_enable(struct uvc_video_queue *queue, int enable)
 void uvcg_complete_buffer(struct uvc_video_queue *queue,
 					  struct uvc_buffer *buf)
 {
-	if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) &&
-	     buf->length != buf->bytesused) {
-		buf->state = UVC_BUF_STATE_QUEUED;
+	if (queue->flags & UVC_QUEUE_DROP_INCOMPLETE) {
+		queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE;
+		buf->state = UVC_BUF_STATE_ERROR;
 		vb2_set_plane_payload(&buf->buf.vb2_buf, 0, 0);
+		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
 		return;
 	}
 

drivers/usb/gadget/function/uvc_video.c

@@ -88,6 +88,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 		struct uvc_buffer *buf)
 {
 	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
 	int len = video->req_size;
 	int ret;
 
@@ -113,13 +114,14 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		list_del(&buf->queue);
-		uvcg_complete_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
 
 		video->payload_size = 0;
 	}
 
 	if (video->payload_size == video->max_payload_size ||
+	    video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE ||
 	    buf->bytesused == video->queue.buf_used)
 		video->payload_size = 0;
 }
@@ -155,10 +157,10 @@ uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
 	sg = sg_next(sg);
 
 	for_each_sg(sg, iter, ureq->sgt.nents - 1, i) {
-		if (!len || !buf->sg || !sg_dma_len(buf->sg))
+		if (!len || !buf->sg || !buf->sg->length)
 			break;
 
-		sg_left = sg_dma_len(buf->sg) - buf->offset;
+		sg_left = buf->sg->length - buf->offset;
 		part = min_t(unsigned int, len, sg_left);
 
 		sg_set_page(iter, sg_page(buf->sg), part, buf->offset);
@@ -180,7 +182,8 @@ uvc_video_encode_isoc_sg(struct usb_request *req, struct uvc_video *video,
 	req->length -= len;
 	video->queue.buf_used += req->length - header_len;
 
-	if (buf->bytesused == video->queue.buf_used || !buf->sg) {
+	if (buf->bytesused == video->queue.buf_used || !buf->sg ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		buf->offset = 0;
@@ -195,6 +198,7 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
 		struct uvc_buffer *buf)
 {
 	void *mem = req->buf;
+	struct uvc_request *ureq = req->context;
 	int len = video->req_size;
 	int ret;
 
@@ -209,12 +213,13 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
 
 	req->length = video->req_size - len;
 
-	if (buf->bytesused == video->queue.buf_used) {
+	if (buf->bytesused == video->queue.buf_used ||
+			video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
 		list_del(&buf->queue);
-		uvcg_complete_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
+		ureq->last_buf = buf;
 	}
 }
 
@@ -255,6 +260,11 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 	case 0:
 		break;
 
+	case -EXDEV:
+		uvcg_dbg(&video->uvc->func, "VS request missed xfer.\n");
+		queue->flags |= UVC_QUEUE_DROP_INCOMPLETE;
+		break;
+
 	case -ESHUTDOWN:	/* disconnect from host. */
 		uvcg_dbg(&video->uvc->func, "VS request cancelled.\n");
 		uvcg_queue_cancel(queue, 1);
@@ -431,7 +441,8 @@ static void uvcg_video_pump(struct work_struct *work)
 
 		/* Endpoint now owns the request */
 		req = NULL;
-		video->req_int_count++;
+		if (buf->state != UVC_BUF_STATE_DONE)
+			video->req_int_count++;
 	}
 
 	if (!req)

drivers/usb/gadget/udc/aspeed-vhub/dev.c

@@ -591,6 +591,7 @@ int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx)
 		d->gadget.max_speed = USB_SPEED_HIGH;
 	d->gadget.speed = USB_SPEED_UNKNOWN;
 	d->gadget.dev.of_node = vhub->pdev->dev.of_node;
+	d->gadget.dev.of_node_reused = true;
 
 	rc = usb_add_gadget_udc(d->port_dev, &d->gadget);
 	if (rc != 0)

drivers/usb/gadget/udc/bdc/bdc_udc.c

@@ -151,6 +151,7 @@ static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit)
 	bdc->delayed_status = false;
 	bdc->reinit = reinit;
 	bdc->test_mode = false;
+	usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED);
 }
 
 /* TNotify wkaeup timer */