EDAC/skx_common: Delete duplicated and unreachable code

skx_mce_check_error() returns early if the error isn't from memory.
So when skx_mce_output_error() is invoked from skx_mce_check_error(),
it doesn't need to re-check whether the error is from memory. Delete
the duplicated and unreachable code from skx_mce_output_error().

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20230113032802.41752-1-qiuxu.zhuo@intel.com

Author: qzhuo2

drivers/edac/skx_common.c

@@ -560,44 +560,28 @@ static void skx_mce_output_error(struct mem_ctl_info *mci,
 		tp_event = HW_EVENT_ERR_CORRECTED;
 	}
 
-	/*
-	 * According to Intel Architecture spec vol 3B,
-	 * Table 15-10 "IA32_MCi_Status [15:0] Compound Error Code Encoding"
-	 * memory errors should fit one of these masks:
-	 *	000f 0000 1mmm cccc (binary)
-	 *	000f 0010 1mmm cccc (binary)	[RAM used as cache]
-	 * where:
-	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
-	 *	    won't be shown
-	 *	mmm = error type
-	 *	cccc = channel
-	 * If the mask doesn't match, report an error to the parsing logic
-	 */
-	if (!((errcode & 0xef80) == 0x80 || (errcode & 0xef80) == 0x280)) {
-		optype = "Can't parse: it is not a mem";
-	} else {
-		switch (optypenum) {
-		case 0:
-			optype = "generic undef request error";
-			break;
-		case 1:
-			optype = "memory read error";
-			break;
-		case 2:
-			optype = "memory write error";
-			break;
-		case 3:
-			optype = "addr/cmd error";
-			break;
-		case 4:
-			optype = "memory scrubbing error";
-			scrub_err = true;
-			break;
-		default:
-			optype = "reserved";
-			break;
-		}
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request error";
+		break;
+	case 1:
+		optype = "memory read error";
+		break;
+	case 2:
+		optype = "memory write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "memory scrubbing error";
+		scrub_err = true;
+		break;
+	default:
+		optype = "reserved";
+		break;
 	}
+
 	if (res->decoded_by_adxl) {
 		len = snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s",
 			 overflow ? " OVERFLOW" : "",