Skip to content

Millwise 0.7.0

Pre-release
Pre-release

Choose a tag to compare

@cyryllo cyryllo released this 15 Nov 19:24
· 21 commits to main since this release

Warning

Wersja testowa. Pierwsze próby wygenerowanego G-code na prawdziwej
frezarce (sterownik FluidNC, G-code zgodny z GRBL) przebiegły dobrze, ale
dokładność wymiarów nie była jeszcze mierzona, a LinuxCNC nie był testowany
na maszynie. Obróbka 3D z tej wersji nie była jeszcze sprawdzana na
maszynie. Zawsze sprawdzaj G-code przed uruchomieniem. Używasz programu
na własną odpowiedzialność.

Test version. First runs of the generated G-code on a real machine
(FluidNC controller, GRBL-compatible G-code) went well, but the accuracy of
the dimensions has not been measured yet and LinuxCNC has not been tested on
a machine. The 3D machining in this version has not been checked on a
machine yet. Always check the G-code before running it. You use the
program at your own risk.

Millwise 0.7.0

AppImage dla Linuksa (x86_64): jeden plik, bez instalacji. Działa na
Debianie 12 / 13, Ubuntu 22.04 lub nowszym i innych dystrybucjach z tego
okresu (glibc 2.35 lub nowsza).

chmod +x Millwise-0.7.0-x86_64.AppImage
./Millwise-0.7.0-x86_64.AppImage

Uwagi i zgłoszenia błędów chętnie przyjmujemy w zgłoszeniach (Issues).

Nowości

  • Interfejs po angielsku. Widok → Język / Language przełącza od razu
    między polskim i angielskim; wybór jest zapamiętywany, a przy pierwszym
    uruchomieniu program bierze język systemu. Ostrzeżenia i komentarze w
    G-code też idą za wybranym językiem.
  • Modele STL (obróbka 3D). Plik STL otwierasz jak rysunek albo dodajesz
    do projektu. Model stoi w półfabrykacie (jednostki mm / cale, skala, obroty
    o 90°, naddatek nad modelem), grubość półfabrykatu idzie za modelem, a
    projekt zapisuje model w środku. Ostrzeżenie o podcięciach, których frez od
    góry nie obrobi.
  • Zakładka „Model 3D”: model jako bryła w półfabrykacie razem ze
    ścieżkami, obracany myszą; otwiera się sama po wczytaniu STL. Jej pasek ma
    tylko narzędzia 3D, a operację 3D dodaje jedno kliknięcie (zaznaczone
    krzywe zamknięte stają się granicami).
  • Operacje 3D:
    • Zgrubna warstwami Z wokół modelu, z naddatkiem i dodatkowymi
      warstwami tuż nad płaskimi miejscami (strategie offsetowa, zygzak, HSM).
    • Wykańczająca równoległa (frez opuszczany na model w gęstych punktach,
      opcjonalnie drugi raz w poprzek) albo warstwicowa (wokół modelu na
      stałych wysokościach — strome ściany). Odstęp przejść w mm.
    • Resztki: tylko tam, gdzie większy frez nie sięgnął (wąskie doliny,
      narożniki).
    • Wycięcie po sylwetce modelu z mostkami, na końcu programu.
    • Sylwetka i obrys powyżej Z jako krzywe do operacji 2D.
    • Ścieżki 3D liczą się w tle — okno nie staje.
  • Symulacja na karcie graficznej. „Bryła (GPU)” rysuje ubytek materiału
    przez kartę graficzną — płynnie przy każdej wielkości programu, także
    przez OpenGL. Na słabej grafice można ją wyłączyć w menu Widok — wtedy
    „Bryła (CPU)” liczy procesor. Widok „Ścieżki” pokazuje model docelowy,
    wykonane ścieżki bieżącej operacji i frezowaną właśnie warstwę na żółto.
    Kolizje ruchów szybkich są sprawdzane w każdym widoku.
  • Zestaw podstawowy narzędzi: frezy płaskie, kulowe, V 60° i wiertła
    3, 4 i 6 mm. Istniejąca biblioteka dostaje brakujące narzędzia
    automatycznie, raz (Twoje narzędzia zostają bez zmian).

Poprawki

  • Symulacja bryły nie zwalnia już pod koniec długich programów (materiał
    liczony w kafelkach).
  • Bardzo duże siatki materiału nie wyłączają programu (błąd „Buffer size …
    is greater than the maximum buffer size”); błąd grafiki nie zamyka już
    programu.
  • Bez prążków na wykończonej powierzchni, gdy w symulacji widać model 3D.
  • Usunięty silnik „Szybki” (za zgrubna powierzchnia do obróbki 3D).

Pełna lista zmian: CHANGELOG.md


Millwise 0.7.0 (English)

AppImage for Linux (x86_64): one file, nothing to install. It runs on
Debian 12 / 13, Ubuntu 22.04 or newer and other distributions of that age
(glibc 2.35 or newer).

chmod +x Millwise-0.7.0-x86_64.AppImage
./Millwise-0.7.0-x86_64.AppImage

Feedback and bug reports are welcome in the issues.

New

  • English user interface. View → Język / Language switches between
    Polish and English at once; the choice is remembered, and on the first
    start the program follows the system language. Warnings and the comments
    in the G-code follow the chosen language too.
  • STL models (3D machining). Open an STL file like a drawing or add it
    to a project. The model sits in the stock (mm / inch units, scale, 90°
    rotations, stock left above it), the stock thickness follows the model,
    and the project keeps the model inside. A warning shows undercuts that a
    cutter coming from the top cannot reach.
  • „3D model” tab: the model as a solid in the stock with the toolpaths,
    turned with the mouse; it opens by itself when an STL is loaded. Its
    toolbar has only the 3D tools, and a 3D operation is added with one click
    (selected closed curves become its boundaries).
  • 3D operations:
    • Roughing in Z levels around the model, with stock to leave and extra
      levels just above flat areas (offset, zigzag or HSM strategy).
    • Finishing with parallel passes (the cutter dropped onto the model at
      close points, optionally a second pass across) or waterlines (around
      the model at constant heights — steep walls). Pass spacing in mm.
    • Rest finishing: only where a bigger cutter could not reach (narrow
      valleys, inside corners).
    • Cut-out along the model silhouette with tabs, at the end of the
      program.
    • Silhouette and outline above Z as curves for 2D operations.
    • 3D toolpaths are computed in the background — the window keeps working.
  • Simulation on the graphics card. „Solid (GPU)” draws the material
    removal on the graphics card — smooth for programs of any size, also
    through OpenGL. On weak graphics it can be turned off in the View menu —
    „Solid (CPU)” is then computed by the processor. The „Toolpaths” view
    shows the target model, the toolpaths done in the current operation and
    the layer being cut in yellow. Rapid moves into the material are checked
    in every view.
  • Basic tool set: flat, ball and 60° V cutters and drills in 3, 4 and
    6 mm. An existing library gets the missing tools automatically, once (your
    own tools stay as they are).

Fixes

  • The solid simulation no longer slows down late in long programs (the
    material is computed in tiles).
  • Very large material meshes no longer close the program („Buffer size … is
    greater than the maximum buffer size”); a graphics error no longer closes
    the program.
  • No stripes on finished surfaces when the 3D model is shown in the
    simulation.
  • The „Fast” engine was removed (its surface was too coarse for 3D work).

Full list of changes: CHANGELOG.md

SHA-256 Millwise-0.7.0-x86_64.AppImage:
64c84b37dc873f0ce56a24cdecf3fa7771419560c6691ca0a0f91fa235cf453c