Repository navigation
Millwise 0.7.1
Pre-releaseWarning
Wersja testowa. Pierwsze próby wygenerowanego G-code na prawdziwej
frezarce (sterownik FluidNC, G-code zgodny z GRBL) przebiegły dobrze, ale
dokładność wymiarów nie była jeszcze mierzona, a LinuxCNC nie był testowany
na maszynie. Obróbka 3D nie była jeszcze sprawdzana na maszynie. Zawsze
sprawdzaj G-code przed uruchomieniem. Używasz programu na własną
odpowiedzialność.
Test version. First runs of the generated G-code on a real machine
(FluidNC controller, GRBL-compatible G-code) went well, but the accuracy of
the dimensions has not been measured yet and LinuxCNC has not been tested on
a machine. The 3D machining has not been checked on a machine yet. Always
check the G-code before running it. You use the program at your own
risk.
Millwise 0.7.1
AppImage dla Linuksa (x86_64): jeden plik, bez instalacji. Działa na
Debianie 12 / 13, Ubuntu 22.04 lub nowszym i innych dystrybucjach z tego
okresu (glibc 2.35 lub nowsza).
chmod +x Millwise-0.7.1-x86_64.AppImage
./Millwise-0.7.1-x86_64.AppImageUwagi i zgłoszenia błędów chętnie przyjmujemy w zgłoszeniach (Issues).
Nowości
- Frezy kulowe stożkowe — boki jak w V-bicie, na końcu półkula; idealne
do wykańczania 3D. Nowy rodzaj w bibliotece narzędzi (kąt stożka i
średnica kulki), liczony z prawdziwym kształtem w ścieżkach 3D, w
symulacji i w podpowiedzi wysokości grzbietów. W zestawie podstawowym
doszedł jeden taki frez (R0,25 · 20°, Ø3,175) — istniejąca biblioteka
dostaje go automatycznie, raz. - Nowe grafiki frezów: metalowy chwyt na pełną szerokość frezu,
część tnąca z węglika z połyskiem i spiralnymi rowkami (wiertła złote) oraz
kolorowy pierścień na chwycie dla każdego rodzaju.
Zmiany
- Frezy pogrupowane według rodzaju — w bibliotece narzędzi i na listach
wyboru (płaskie, kulowe, kulowe stożkowe, z promieniem, V, grawerskie,
wiertła), w grupie od najmniejszej średnicy. - W ustawieniach operacji frez jest na samej górze, nad głębokością — to
zwykle pierwsze, co się wybiera albo zmienia. Posuwy i obroty są niżej,
w części „Skrawanie”.
Pełna lista zmian: CHANGELOG.md
Millwise 0.7.1 (English)
AppImage for Linux (x86_64): one file, nothing to install. It runs on
Debian 12 / 13, Ubuntu 22.04 or newer and other distributions of that age
(glibc 2.35 or newer).
chmod +x Millwise-0.7.1-x86_64.AppImage
./Millwise-0.7.1-x86_64.AppImageFeedback and bug reports are welcome in the issues.
New
- Tapered ball cutters — sides like a V-bit with a hemispherical tip;
ideal for 3D finishing. A new type in the tool library (taper angle and
ball diameter), computed with its real shape in 3D toolpaths, in the
simulation and in the scallop height hint. The basic set gets one
(R0.25 · 20°, Ø3.175) — an existing library receives it automatically,
once. - New tool drawings: a metal shank as wide as the cutter, a polished
carbide cutting part with spiral flutes (drills in gold) and a coloured
ring on the shank for each tool type.
Changes
- Tools grouped by type — in the tool library and in the tool lists
(flat, ball, tapered ball, bull-nose, V, engraving, drills), smallest
diameter first. - The tool comes first in the operation settings, above the depth — it
is what is usually chosen or changed first. Feeds and speed are below,
under „Cutting”.
Full list of changes: CHANGELOG.md
SHA-256 Millwise-0.7.1-x86_64.AppImage:
408356d035ac13f5cbf91edf3003715c0c0ef0635c6fb0c0ae9d1ea38b36d163