Repository navigation
Releases
Kodi 22 TV-led DV for Windows (Nvidia) - Test Build 3
An unofficial portable Kodi 22 test build that supports TV-led Dolby Vision on Windows and works with Nvidia GPUs.
Thanks to everyone who tested the previous build. Every setup is different, so please keep testing and reporting if you run into issues, it helps a lot.
Tested DV Profiles: 5, 8.1, 8.6 and 7 (MEL and FEL)
Requirements
- Nvidia GPU, connected over HDMI (DO NOT use adapters like: DP to HDMI. Only HDMI from your GPU to the TV/AVR) with driver 551.23 or newer
- A TV that supports TV-led DV
- Windows HDR can be on or off. If it's on, Kodi's "Adjust display HDR mode" in
Settings/System/Displaymust be on - Kodi's "Adjust display refresh rate" not set to Off (the default is fine)
How to use
- Unzip
kodi-22-piers-windows-dv-test-build.zip - Run
Start Kodi (portable).cmd. This runs Kodi in portable mode, separate from any installed Kodi and your normal profile. - Go to
Settings/System Information/Videoto see supported HDR types:
- Go to
Settings/Player/Videos(level set to Advanced) and turn on "Send Dolby Vision to the display":
Note
On my LG C1 whenever I turned on DV content it changed the picture mode to "Game Optimiser" til I set "Content type reported to the display" to "Movies" in the Nvidia control panel:

For Reports include
- GPU + driver version, TV model, AV receiver (if any)
- Dolby Vision profile and frame rate of the file
portable_data/kodi.log(enable debug logging inSettings/System/Loggingif you can)
This is not an official Kodi build and is not supported by Team Kodi.
Source
dolby-vision-test (commit f74cd048e4), licensed GPL-2.0-or-later.
Test Build 3 changes
- Updated to Kodi 22 RC2
- Added support for Kodi's "GUI peak luminance in HDR PQ mode" setting during DV playback, so subtitle and OSD brightness can now be adjusted
- Added the DV L5 active area. The TV now knows where the black bars are, so brightness trims no longer lift them. Menus and subtitles in the bars stay visible
- Added an option to send content mapping v2.9 as v4.0 in Settings/Player/Videos
- Added DV info to the player info dialog: profile, FEL used or not, content mapping version, mastering display and active area
- Added support for exclusive fullscreen. "Use fullscreen window" no longer has to be on
- Fixed rare FEL flickering. The enhancement layer is now matched to the right picture when the two layers are stored in a different order
- Fixed a crash when starting some FEL movies, caused by the thumbnail generator decoding the enhancement layer
- Fixed DV being refused at 59.94 Hz on some TVs
- Fixed the next video sometimes playing at the wrong refresh rate after a DV video
- Fixed the TV not updating its tone mapping right after seeking
- Improved colour accuracy at sharp edges (4:2:0 to 4:2:2 conversion now uses the filters from the DV spec)
Kodi 22 TV-led DV for Windows (Nvidia) - Test Build 2
An unofficial portable Kodi 22 test build that supports TV-led Dolby Vision on Windows and works with Nvidia GPUs.
Thanks to everyone who tested build 1. Every setup is different, so please keep testing and reporting if you run into issues, it helps a lot.
Tested DV Profiles: 5, 8.1, 8.6 and 7 (MEL and FEL)
Requirements
- Nvidia GPU, connected over HDMI (DO NOT use adapters like: DP to HDMI. Only HDMI from your GPU to the TV/AVR) with driver 551.23 or newer
- A TV that supports TV-led DV
- Windows HDR can be on or off. If it's on, Kodi's "Adjust display HDR mode" in
Settings/System/Displaymust be on - Kodi's "Adjust display refresh rate" not set to Off (the default is fine)
How to use
- Unzip
kodi-22-piers-windows-dv-test-build.zip - Run
Start Kodi (portable).cmd. This runs Kodi in portable mode, separate from any installed Kodi and your normal profile. - Go to
Settings/System Information/Videoto see supported HDR types:
- Go to
Settings/Player/Videos(level set to Advanced) and turn on "Send Dolby Vision to the display":
Note
On my LG C1 whenever I turned on DV content it changed the picture mode to "Game Optimiser" til I set "Content type reported to the display" to "Movies" in the Nvidia control panel:

For Reports include
- GPU + driver version, TV model, AV receiver (if any)
- Dolby Vision profile and frame rate of the file
portable_data/kodi.log(enable debug logging inSettings/System/Loggingif you can)
This is not an official Kodi build and is not supported by Team Kodi.
Source
dolby-vision-test (commit d027157405), licensed GPL-2.0-or-later.
Test Build 2 changes
- Added support for Windows HDR being on. Kodi turns it off for DV playback and back on afterwards
- Added support for NVCP output above 8 bpc. Kodi switches to 8 bpc RGB for DV playback and restores your setting afterwards
- Potential fix for the TV staying in DV after playback stopped. The Nvidia driver ignores the request to turn DV off and stays in its DV mode (mode 7), so Kodi now briefly starts two small helper copies of itself whose exit makes the driver leave DV
- Fixed a leftover DV state after a crash. Kodi now makes the driver leave DV the next time it starts
- Fixed subtitles only showing while the OSD was open during DV playback. They now show all the time
- Fixed turning Windows HDR on or off during DV playback. Kodi now leaves DV before the switch
- Fixed the DV metadata ID. It now changes whenever the metadata changes
- Fixed the order of the DV metadata blocks. They are now sent in the order the video has them
- Potential fix for DV being sent to the wrong display on PCs with more than one monitor
- Changed DV so it works with any "Render method" setting
- Improved the log to show why Kodi didn't use DV for a video
Kodi 22 TV-led DV for Windows (Nvidia) - Test Build 1
An unofficial portable Kodi 22 test build that supports TV-led Dolby Vision on Windows and works with Nvidia GPUs.
This is the very first build I'm releasing, so I'm expecting there to be issues with other setups as I have only tested 2 GPUs (GTX 1080 / RTX 5090) on 2 separate PCs and only 1 TV (LG C1) and AVR (Denon X3800H), so any and all reports are welcome.
Tested DV Profiles: 5, 8.1, 8.6 and 7 (MEL and FEL)
Requirements
- Nvidia GPU, connected over HDMI (DO NOT use adapters like: DP to HDMI. Only HDMI from your GPU to the TV/AVR) with a driver 551.23 or newer
- A TV that supports TV-led DV
- Windows HDR switched off on the desktop (Kodi switches the TV itself)
- Kodi's "Adjust display refresh rate" not set to Off (the default is fine)
How to use
- Unzip
kodi-22-piers-windows-dv-test-build.zip - Run
Start Kodi (portable).cmd. This runs Kodi in portable mode, separate from any installed Kodi and your normal profile. - Go to
Settings/System Information/Videoto see supported HDR types:
- Go to
Settings/Player/Videos(level set to Expert) and turn on "Send Dolby Vision to the display":
Note
On my LG C1 whenever I turned on DV content it changed the picture mode to "Game Optimiser" til I set "Content type reported to the display" to "Movies" in the Nvidia control panel:

For Reports include
- GPU + driver version, TV model, AV receiver (if any)
- Dolby Vision profile and frame rate of the file
portable_data/kodi.log(enable debug logging inSettings/System/Loggingif you can)
This is not an official Kodi build and is not supported by Team Kodi.
Source
dolby-vision-test (commit 5da44c2547), licensed GPL-2.0-or-later.