Repository navigation
Flashing
Easiest: flash the merged image at address 0x0 with esptool:
esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 write_flash 0x0 paperOS-v1.3.0-paperdiy-merged.binOr flash the separate images: bootloader at 0x0, partitions at 0x8000, boot_app0 at 0xe000 and firmware at 0x10000.
If the upload can't connect, long-hold the power button to put the PaperDIY into download mode and try again. Check downloads against SHA256SUMS.txt. See the README for full instructions.
Full Changelog: v1.2.0...v1.3.0