v2.1.2

What's Changed

• site: bottom dock, overlapping hero card, calmer footer by @danoszz in #205
• docs: pin 2.1.1 everywhere users copy a command by @danoszz in #206
• fix(site): /pro scrolls sideways again by @danoszz in #208
• site: agent-ready docs, API spec and contact page by @danoszz in #207
• docs: homepage title, skill grade sentence, trust table by @danoszz in #209
• fix: named skills scan, verdicts match exit codes, clean --help by @danoszz in #210
• release: 2.1.2 by @danoszz in #211

Full Changelog: v2.1.1...v2.1.2

Share this release

LinkedIn (566 characters)

Penthera v2.1.2 is out: open-source security for the apps and AI systems you ship.


What's new:
• Unknown API paths answer in JSON: /api and anything under it that is not a route return a 404 with error.code, error.message and error.hint…
• The live check says when to retry: A rate-limited check now carries Retry-After, set to the longest wait among the limits it hit, and the…
• /server.json is on the site: It is the MCP Registry manifest from the repo

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.1.2

X / Bluesky (219/280 characters)

Penthera v2.1.2 is out.
• Unknown API paths answer in JSON
• The live check says when to retry
• /server.json is on the site
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.1.2

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v2.1.1

What's Changed

• E20: the source address stays private; app page adopted by @danoszz in #197
• Pin 2.1.0 everywhere by @danoszz in #198
• Register E20: lists stored and hashed by @danoszz in #199
• research: register E20-R, with runner, classifier and study page by @danoszz in #201
• fix: hold the MCP scan scope on every hop; no grade for an empty agents audit by @danoszz in #200
• research: E20-R amendment 1 and deviation 1 by @danoszz in #202
• fix: no false critical on single-page apps, honest exit 0 by @danoszz in #203
• release: 2.1.1 by @danoszz in #204

Full Changelog: v2.1.0...v2.1.1

Share this release

LinkedIn (592 characters)

Penthera v2.1.1 is out: open-source security for the apps and AI systems you ship.


What's new:
• scanurl over MCP now stays in scope on every request and redirect hop, with or without --offline: It reaches the target and hosts you listed with --allow-host
• penthera agents gives no grade when it finds no agent config: It used to report A, 100 and Nothing to fix
• E20-R study tooling (research): A runner and analysis for the planned front-door follow-up, tested on loopback only

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.1.1

X / Bluesky (250/280 characters)

Penthera v2.1.1 is out.
• scanurl over MCP now stays in scope on every…
• penthera agents gives no grade when it finds no…
• E20-R study tooling (research)
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.1.1

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v2.1.0

What's Changed

• plugin: a small plugin/ folder for the plugin directory; narrow the skill's allowed-tools by @danoszz in #173
• docs: roadmap track, --giants spec (approved) and E14 pre-registration by @danoszz in #175
• media: share images of the public benchmarks (cards, scatter charts, paper-style figures, screenshots) by @danoszz in #174
• docs(research): E15 candidate, indirect prompt injections hidden in what agents read by @danoszz in #179
• docs(roadmap): Supabase row-level security, KEV/EPSS ranking, Python rules up, wider E13 field by @danoszz in #181
• site: count checks and installs with cookieless Web Analytics events by @danoszz in #182
• --giants: run the free scanners you already have, in one report (2.1.0-rc work) by @danoszz in #180
• chore(deps): Bump actions/download-artifact from 8.0.1 to 8.0.2 in the actions group by @dependabot[bot] in #177
• chore(deps-dev): Bump the dev-dependencies group with 2 updates by @dependabot[bot] in #176
• release: 2.1.0-rc.1 (--giants, first-run fixes, benchmark pages, blog) by @danoszz in #184
• rc.2 batch: the agent brief, triage fixes, /upkeep, roadmap, E14 dev half by @danoszz in #187
• release: 2.1.0-rc.2 by @danoszz in #188
• Sprint: Pro as an experiment, Go Pro, /trust, governance, Clerk keys, Mintlify docs, E14 step 2 by @danoszz in #189
• docs: readable page names on docs.penthera.org by @danoszz in #190
• Publish the two benchmark posts by @danoszz in #191
• Specs and pre-registrations: penthera watch, E15 (draft), E17 (registered) by @danoszz in #192
• feat: scan Client JS bundles for provider keys(#6) by @divya-o in #183
• Road to 50k batch: E17 result, before-you-publish, agent-setup gaps, PR check by @danoszz in #193
• Site: the live check becomes the hero (poster is the check) by @danoszz in #194
• Pre-2.1.0: honest rank intervals, E17 normaliser fix by @danoszz in #195
• Release 2.1.0: research hub, research standard, E20 study page, footer, performance by @danoszz in #196

New Contributors

• @divya-o made their first contribution in #183

Full Changelog: v2.0.0...v2.1.0

Share this release

LinkedIn (552 characters)

Penthera v2.1.0 is out: open-source security for the apps and AI systems you ship.


What's new:
• penthera agents checks five more ways agent config runs code (ADR 0002): New rules, each with a test on a defanged fixture
• The agent config check on every pull request, in one file: docs/examples/github-actions-agents.yml runs npx --yes…
• Provider keys in client JavaScript: A URL scan now reads the scripts the home page loads from its own…

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.1.0

X / Bluesky (254/280 characters)

Penthera v2.1.0 is out.
• penthera agents checks five more ways agent…
• The agent config check on every pull request, in…
• Provider keys in client JavaScript
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.1.0

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v2.1.0-rc.2

What's Changed

• rc.2 batch: the agent brief, triage fixes, /upkeep, roadmap, E14 dev half by @danoszz in #187
• release: 2.1.0-rc.2 by @danoszz in #188

Full Changelog: v2.1.0-rc.1...v2.1.0-rc.2

Share this release

LinkedIn (592 characters)

Penthera v2.1.0-rc.2 is out: open-source security for the apps and AI systems you ship.


What's new:
• The agent brief: one short reply for your AI assistant: After a scan, assistants used to write their own summary of a long…
• /upkeep is now /pro: Penthera Pro, a security partner for software built with agents: The page proposes rather than sells
• E14 step 1, the dev half: Penthera plus the free tools: A new harness, bench/public/giants.mjs, reruns gitleaks, trufflehog…

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.1.0-rc.2

X / Bluesky (272/280 characters)

Penthera v2.1.0-rc.2 is out.
• The agent brief: one short reply for your AI…
• /upkeep is now /pro: Penthera Pro, a security…
• E14 step 1, the dev half: Penthera plus the…
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.1.0-rc.2

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v2.1.0-rc.1

What's Changed

• plugin: a small plugin/ folder for the plugin directory; narrow the skill's allowed-tools by @danoszz in #173
• docs: roadmap track, --giants spec (approved) and E14 pre-registration by @danoszz in #175
• media: share images of the public benchmarks (cards, scatter charts, paper-style figures, screenshots) by @danoszz in #174
• docs(research): E15 candidate, indirect prompt injections hidden in what agents read by @danoszz in #179
• docs(roadmap): Supabase row-level security, KEV/EPSS ranking, Python rules up, wider E13 field by @danoszz in #181
• site: count checks and installs with cookieless Web Analytics events by @danoszz in #182
• --giants: run the free scanners you already have, in one report (2.1.0-rc work) by @danoszz in #180
• chore(deps): Bump actions/download-artifact from 8.0.1 to 8.0.2 in the actions group by @dependabot[bot] in #177
• chore(deps-dev): Bump the dev-dependencies group with 2 updates by @dependabot[bot] in #176
• release: 2.1.0-rc.1 (--giants, first-run fixes, benchmark pages, blog) by @danoszz in #184

Full Changelog: v2.0.0...v2.1.0-rc.1

Share this release

LinkedIn (590 characters)

Penthera v2.1.0-rc.1 is out: open-source security for the apps and AI systems you ship.


What's new:
• --giants: run the free scanners you already have, in one report: After its own scan, Penthera runs the tools installed on your…
• The Claude Code plugin now installs from a small plugin/ folder: It holds the Penthera skill, the pinned MCP server, a README, the…
• Share images of the public benchmarks: scripts/media/ now makes the benchmark cards in Instagram square and…

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.1.0-rc.1

X / Bluesky (261/280 characters)

Penthera v2.1.0-rc.1 is out.
• --giants: run the free scanners you already…
• The Claude Code plugin now installs from a…
• Share images of the public benchmarks
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.1.0-rc.1

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v2.0.0

What's Changed

• ci: upgrade test from 1.9.0 by @danoszz in #150
• chore: root .mcp.json with Penthera's pinned MCP server by @danoszz in #151
• feat: Gemini CLI extension, and proof up front in the README by @danoszz in #152
• docs(mcp): ready for the Docker and Cline MCP catalogs by @danoszz in #153
• docs(readme): a status per part, and verify it yourself by @danoszz in #154
• fix(deps): IOC hosts match whole hostnames only (false litellm alarm) by @danoszz in #156
• site: HSTS preload for penthera.org by @danoszz in #157
• fix(cli): --json to a pipe is no longer truncated at 64 KiB by @danoszz in #158
• feat(secrets): read key files, PHP, C#, configs and docs (E11b pass 1) by @danoszz in #159
• feat(secrets): a finding lists every line it hit, plus ADR 0001 (E11b A6, stacked on #159) by @danoszz in #160
• docs(readme): drop the One real fix section by @danoszz in #161
• feat(scan): library mode, exported parameters as sources (E11b D1+D2) by @danoszz in #162
• feat(secrets): password, key-variant and API-key rules (E11b pass 2) by @danoszz in #163
• feat(deps): malicious-package detection, E11b passes A–D and C1 by @danoszz in #164
• chore(audit): package budget 900 KB / 2.4 MB (E11b round 2) by @danoszz in #168
• feat(scan): library mode follows one helper call and this (E11b round 2) by @danoszz in #165
• feat(secrets): provider and generic API key detection (E11b round 2) by @danoszz in #166
• feat(deps): PyPI malware and compromised-release detection (E11b round 2) by @danoszz in #167
• E11: Penthera on public benchmarks (pre-registration, runner, results) by @danoszz in #155
• Publish the E11b public benchmark results (README, site, docs) by @danoszz in #169
• release: 2.0.0-rc.1 by @danoszz in #170
• release: 2.0.0 (with the translation-file fix and #171) by @danoszz in #172

Full Changelog: v1.9.0...v2.0.0

Share this release

LinkedIn (600 characters)

Penthera v2.0.0 is out: open-source security for the apps and AI systems you ship.

Everything in 2.0.0-rc.1 below, plus:

What's new:
• Copied commands always install: While main carries a release candidate, the site and its mirrors pin the latest stable release instead of a…
• Penthera in your coding tool: one page with the setup for Claude Code, Cursor, VS Code, Codex, Gemini CLI, Antigravity, Windsurf, Cline…
• No more password alarms in translation files: A translation's "password"

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.0.0

X / Bluesky (229/280 characters)

Penthera v2.0.0 is out.
• Copied commands always install
• Penthera in your coding tool
• No more password alarms in translation files
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.0.0

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v2.0.0-rc.1

What's Changed

• ci: upgrade test from 1.9.0 by @danoszz in #150
• chore: root .mcp.json with Penthera's pinned MCP server by @danoszz in #151
• feat: Gemini CLI extension, and proof up front in the README by @danoszz in #152
• docs(mcp): ready for the Docker and Cline MCP catalogs by @danoszz in #153
• docs(readme): a status per part, and verify it yourself by @danoszz in #154
• fix(deps): IOC hosts match whole hostnames only (false litellm alarm) by @danoszz in #156
• site: HSTS preload for penthera.org by @danoszz in #157
• fix(cli): --json to a pipe is no longer truncated at 64 KiB by @danoszz in #158
• feat(secrets): read key files, PHP, C#, configs and docs (E11b pass 1) by @danoszz in #159
• feat(secrets): a finding lists every line it hit, plus ADR 0001 (E11b A6, stacked on #159) by @danoszz in #160
• docs(readme): drop the One real fix section by @danoszz in #161
• feat(scan): library mode, exported parameters as sources (E11b D1+D2) by @danoszz in #162
• feat(secrets): password, key-variant and API-key rules (E11b pass 2) by @danoszz in #163
• feat(deps): malicious-package detection, E11b passes A–D and C1 by @danoszz in #164
• chore(audit): package budget 900 KB / 2.4 MB (E11b round 2) by @danoszz in #168
• feat(scan): library mode follows one helper call and this (E11b round 2) by @danoszz in #165
• feat(secrets): provider and generic API key detection (E11b round 2) by @danoszz in #166
• feat(deps): PyPI malware and compromised-release detection (E11b round 2) by @danoszz in #167
• E11: Penthera on public benchmarks (pre-registration, runner, results) by @danoszz in #155
• Publish the E11b public benchmark results (README, site, docs) by @danoszz in #169
• release: 2.0.0-rc.1 by @danoszz in #170

Full Changelog: v1.9.0...v2.0.0-rc.1

Share this release

LinkedIn (577 characters)

Penthera v2.0.0-rc.1 is out: open-source security for the apps and AI systems you ship.


What's new:
• Library mode for --repo: the parameters of exported functions count as untrusted: A shell command built from one is reported as command-injection at…
• More shell and eval shapes in every repo scan: exec under any binding of childprocess (cp.exec, childprocess1.exec…
• Gemini CLI extension: gemini extensions install https://github.com/danoszz/penthera adds…

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v2.0.0-rc.1

X / Bluesky (245/280 characters)

Penthera v2.0.0-rc.1 is out.
• Library mode for --repo: the parameters of…
• More shell and eval shapes in every repo scan
• Gemini CLI extension
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v2.0.0-rc.1

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v1.9.0

What's Changed

• feat(deps): Python start-up code in wheels + PyPI IOC pack (litellm 1.107.0) by @danoszz in #90
• feat(advisories): Node.js security release of 21 Oct 2026 (Brotli RCE, TLS hostname bypasses) by @danoszz in #91
• feat(tls): flag certificates whose EC private key anyone can compute (eMudhra) by @danoszz in #93
• feat(headers): report X-Powered-By disclosure by @danoszz in #107
• feat(templates): Prometheus /metrics, directory listings, stack traces by @danoszz in #108
• feat(secrets): read Terraform/HCL files; flag hardcoded session secrets by @danoszz in #110
• feat(repo): code-execution sinks in all server code, taint-lite by @danoszz in #111
• feat(report): coverage ledger for repo scans by @danoszz in #96
• fix(scan-repo): Express routes/ folders get route analysis by @danoszz in #104
• feat(verify): check an AI audit's findings against Penthera's rules by @danoszz in #98
• feat(report): --audit-seeds writes repo findings as seeds for an AI audit by @danoszz in #99
• feat(ui): AI mode in the dashboard, with the consent sheet by @danoszz in #109
• docs(research): GitLab CVE-2026-110264: why a passive version check isn't feasible, and what is by @danoszz in #92
• feat(site): og:video link-preview reel for penthera.org by @danoszz in #94
• E10: verify the pilot's misses; re-run after the recall fixes by @danoszz in #112
• feat(site): benchmark section with the E10 pilot by @danoszz in #115
• fix(ui): listen for stop signals before announcing readiness by @danoszz in #118
• feat(ai): opt-in AI mode, a local model proposes and Penthera's rules check by @danoszz in #105
• feat(advisories): MongoDB end-of-life lines (pack unsigned) by @danoszz in #113
• feat(site): before and after, from a real scan by @danoszz in #117
• feat(site): How Penthera compares by @danoszz in #119
• ci: faster merges (slim PR checks, merge queue, changelog fragments) by @danoszz in #122
• feat(mcp): penthera mcp, an MCP server on stdio with six read-only tools by @danoszz in #120
• fix(cli): clear errors for an unknown word, a bare host and Ctrl-D by @danoszz in #123
• fix(sarif): give every result a location, as GitHub code scanning requires by @danoszz in #125
• fix(ui): the dashboard's check-then-fix flow, and finding rows with long paths by @danoszz in #126
• fix(skill): the Claude Code plugin loads, and preflight works from an installed skill by @danoszz in #127
• fix(site): the paste panels fit a 375px phone by @danoszz in #128
• fix(scan): stop at a firewall bot challenge instead of reporting its page by @danoszz in #124
• E10: Penthera on known-vulnerable apps (draft protocol, runner, pilot) by @danoszz in #100
• fix(scan): the default scan sends no attack payloads to the login by @danoszz in #130
• site(faq): how to scan your own site behind a CDN firewall by @danoszz in #131
• fix(hook): fall back to the pinned version through npx when its copy is gone by @danoszz in #132
• docs(research): end-to-end test of 1.8.1, the dashboard, the site and the agents by @danoszz in #129
• bench(advisories): labelled set of 253 real-world runtime version strings by @danoszz in #97
• docs(mcp): penthera mcp docs, client configs, listing text, site section, llms.txt by @danoszz in #121
• docs: README, ROADMAP and research plan describe what is on main for 1.9 by @danoszz in #133
• rules: sign the advisories and ioc-pypi-2026 packs by @danoszz in #134
• release: 1.9.0-rc.1 by @danoszz in #135
• docs: Penthera and Cloudflare's security-audit skill, compared and researched by @danoszz in #89
• fix(secrets): repo scan survives vanishing files and stops flagging venvs by @danoszz in #138
• docs: restructure around five journeys, shorter README, add AGENTS.md by @danoszz in #137
• site: pin every command to package.json's version by @danoszz in #136
• site: restructure penthera.org as a story, with files for agents by @danoszz in #139
• feat(scan): confirmation gate and rate limit for active modes by @danoszz in #95
• site: current limitations with a roadmap per limit, compact comparison, marker hero by @danoszz in #140
• site: live security check, clearer story, check-and-fix mode, terms by @danoszz in #142
• fix(site): check-and-fix report below the header at every width by @danoszz in #143
• fix(site): content-hashed share image and reel URLs by @danoszz in #144
• fix(detect): .env.local template, SPA sensitive-file FP, Map/RegExp whitebox FP by @danoszz in #141
• feat(ui): the dashboard in penthera.org's look, and fresh media by @danoszz in #145
• site: landing pages, IndexNow, 9:16 card; docs: distribution drafts by @danoszz in #146
• chore(site): Vercel builds for production only by @danoszz in #147
• chore: keep the distribution drafts out of the public repo by @danoszz in #148
• release: 1.9.0 by @danoszz in #149

Full Changelog: v1.8.1...v1.9.0

Share this release

LinkedIn (587 characters)

Penthera v1.9.0 is out: open-source security for the apps and AI systems you ship.

Everything in 1.9.0-rc.1 below, plus:

What's new:
• Active modes ask before they start, and are rate-limited: --deep, --fuzz, --adaptive, --all and --profile deep now need a…
• penthera ui looks and reads like penthera.org: The verdict is the headline, the score is a 10 × 10 grid of pixels…
• Fresh screenshots and recordings: The dashboard screenshots, the 80-second walkthrough, the README…

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v1.9.0

X / Bluesky (248/280 characters)

Penthera v1.9.0 is out.
• Active modes ask before they start, and are…
• penthera ui looks and reads like penthera.org
• Fresh screenshots and recordings
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v1.9.0

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v1.9.0-rc.1

What's Changed

• feat(deps): Python start-up code in wheels + PyPI IOC pack (litellm 1.107.0) by @danoszz in #90
• feat(advisories): Node.js security release of 21 Oct 2026 (Brotli RCE, TLS hostname bypasses) by @danoszz in #91
• feat(tls): flag certificates whose EC private key anyone can compute (eMudhra) by @danoszz in #93
• feat(headers): report X-Powered-By disclosure by @danoszz in #107
• feat(templates): Prometheus /metrics, directory listings, stack traces by @danoszz in #108
• feat(secrets): read Terraform/HCL files; flag hardcoded session secrets by @danoszz in #110
• feat(repo): code-execution sinks in all server code, taint-lite by @danoszz in #111
• feat(report): coverage ledger for repo scans by @danoszz in #96
• fix(scan-repo): Express routes/ folders get route analysis by @danoszz in #104
• feat(verify): check an AI audit's findings against Penthera's rules by @danoszz in #98
• feat(report): --audit-seeds writes repo findings as seeds for an AI audit by @danoszz in #99
• feat(ui): AI mode in the dashboard, with the consent sheet by @danoszz in #109
• docs(research): GitLab CVE-2026-110264: why a passive version check isn't feasible, and what is by @danoszz in #92
• feat(site): og:video link-preview reel for penthera.org by @danoszz in #94
• E10: verify the pilot's misses; re-run after the recall fixes by @danoszz in #112
• feat(site): benchmark section with the E10 pilot by @danoszz in #115
• fix(ui): listen for stop signals before announcing readiness by @danoszz in #118
• feat(ai): opt-in AI mode, a local model proposes and Penthera's rules check by @danoszz in #105
• feat(advisories): MongoDB end-of-life lines (pack unsigned) by @danoszz in #113
• feat(site): before and after, from a real scan by @danoszz in #117
• feat(site): How Penthera compares by @danoszz in #119
• ci: faster merges (slim PR checks, merge queue, changelog fragments) by @danoszz in #122
• feat(mcp): penthera mcp, an MCP server on stdio with six read-only tools by @danoszz in #120
• fix(cli): clear errors for an unknown word, a bare host and Ctrl-D by @danoszz in #123
• fix(sarif): give every result a location, as GitHub code scanning requires by @danoszz in #125
• fix(ui): the dashboard's check-then-fix flow, and finding rows with long paths by @danoszz in #126
• fix(skill): the Claude Code plugin loads, and preflight works from an installed skill by @danoszz in #127
• fix(site): the paste panels fit a 375px phone by @danoszz in #128
• fix(scan): stop at a firewall bot challenge instead of reporting its page by @danoszz in #124
• E10: Penthera on known-vulnerable apps (draft protocol, runner, pilot) by @danoszz in #100
• fix(scan): the default scan sends no attack payloads to the login by @danoszz in #130
• site(faq): how to scan your own site behind a CDN firewall by @danoszz in #131
• fix(hook): fall back to the pinned version through npx when its copy is gone by @danoszz in #132
• docs(research): end-to-end test of 1.8.1, the dashboard, the site and the agents by @danoszz in #129
• bench(advisories): labelled set of 253 real-world runtime version strings by @danoszz in #97
• docs(mcp): penthera mcp docs, client configs, listing text, site section, llms.txt by @danoszz in #121
• docs: README, ROADMAP and research plan describe what is on main for 1.9 by @danoszz in #133
• rules: sign the advisories and ioc-pypi-2026 packs by @danoszz in #134
• release: 1.9.0-rc.1 by @danoszz in #135

Full Changelog: v1.8.1...v1.9.0-rc.1

Share this release

LinkedIn (596 characters)

Penthera v1.9.0-rc.1 is out: open-source security for the apps and AI systems you ship.

Release candidate for 1.9.0, on npm's next dist-tag (npm install penthera@next).

What's new:
• Coverage ledger: in every --repo report (terminal, Markdown, JSON coverage)
• AI mode, opt-in and experimental: penthera --repo . --ai: A model in your local Ollama reads your code part by part and proposes problems no rule describes
• AI mode in the dashboard: New scan has an AI mode switch, off

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v1.9.0-rc.1

X / Bluesky (219/280 characters)

Penthera v1.9.0-rc.1 is out.
• Coverage ledger
• AI mode, opt-in and experimental: penthera…
• AI mode in the dashboard
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v1.9.0-rc.1

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.

v1.8.1

What's Changed

• feat(site): a daily workflow that proposes news ticker items as a PR by @danoszz in #81
• docs: link the website, penthera.org by @danoszz in #85
• feat(site): cookieless Vercel Web Analytics and Speed Insights on penthera.org by @danoszz in #86
• feat(site): FAQ, roomier share images, link-preview title and description by @danoszz in #87
• docs(advisories): OpenAI's php2shell-checker as an independent cross-check by @danoszz in #88
• fix(ui): flush "Stopped." before exiting on Ctrl-C or SIGTERM by @danoszz in #84
• fix(advisories): pre-releases are never reported as having the fix by @danoszz in #101
• fix(advisories): honour introduced on release lines older than the flaw by @danoszz in #102
• fix(advisories): read aiohttp's major.minor Python banner by @danoszz in #103
• fix(advisories): resolve Node.js LTS codenames to their release line by @danoszz in #106
• fix(advisories): a banner with no distribution token is at most potential by @danoszz in #114
• release: 1.8.1 by @danoszz in #116

Full Changelog: v1.8.0...v1.8.1

Share this release

LinkedIn (506 characters)

Penthera v1.8.1 is out: open-source security for the apps and AI systems you ship.

A fixes-only release.

What's new:
• npx penthera ui stops cleanly on Ctrl-C and SIGTERM: npm forwards the signal to penthera right after the terminal delivered it, and the second copy could kill…
• penthera.org counts anonymous page views and load times…
• The PHP case study and docs/runtime-advisories.md cite…

npm: https://www.npmjs.com/package/penthera
GitHub: https://github.com/danoszz/penthera/releases/tag/v1.8.1

X / Bluesky (266/280 characters)

Penthera v1.8.1 is out.
• npx penthera ui stops cleanly on Ctrl-C and…
• penthera.org counts anonymous page views and…
• The PHP case study and docs/runtime-advisories.md…
https://www.npmjs.com/package/penthera
https://github.com/danoszz/penthera/releases/tag/v1.8.1

Drafted from the CHANGELOG. Edit, then post by hand once the npm release is approved.