Repository navigation
Release packages
- Standalone installer: multiace-v1.90.tar.gz and its SHA-256 checksum.
- Platform-managed payload: multiace-managed-1.90.tar.gz and its SHA-256 checksum.
Built from source commit 1c79ade (1c79ade).
What's Changed
Features
- Bowden path calibration - reworked flow, encoder-based distance, new-design theming by @physicsG in #168
- Initial draft proposal: ACE_BG_WAIT - Prioritize Cold Pull over Carriage Picker by @docx-tech in #186
Other changes
- Update README.md USB Connection section by @docx-tech in #174
- Add opt-in verified ACE 2 discovery for generic USB adapters by @Tareku99 in #155
- CHORE: test harness, mock mode and CI job by @stefanodangelo in #179
- CHORE: dev scripts for the mock UI and printer push by @stefanodangelo in #180
- FEAT: render the top bar from a navItems list by @stefanodangelo in #181
- Organize multiACE macros in Fluidd and Mainsail by @Tareku99 in #178
- FEAT: group tabs in the top bar by @stefanodangelo in #184
- FEAT: Control tab under Print Hub (webcam, print panel, console) by @stefanodangelo in #188
- FEAT: History tab under Print Hub by @stefanodangelo in #191
- TEST: restart tests never reach the local reboot fallback by @decay71 in #192
- FIX: Control tab target boxes and enclosure fans during a print by @stefanodangelo in #194
- FEAT: swap cost model core by @stefanodangelo in #193
- FIX: bg swap hands the heater back to the slicer, swap never restores… by @decay71 in #196
- FEAT: swap cost model purge and estimate block by @stefanodangelo in #195
- fix(bg-swap): announce the toolchange to the engine before the stock … by @decay71 in #198
- FEAT: preflight estimate data (timeline, estimate per plan, re-estimate) by @stefanodangelo in #199
- feat(history): column info banners and loadout check before reprint by @stefanodangelo in #200
- multiACE 1.30b by @decay71 in #205
- FEAT: estimate card and swap timeline in the preflight dialog by @stefanodangelo in #206
- fix(bg-swap): no runout pause when the arrival waits for the bulk ret… by @decay71 in #207
- fix(bg-swap): count only the net retract of the cold pull against the… by @decay71 in #210
- FEAT: favorites - star prints in History, Favorites tab with reprint by @stefanodangelo in #209
- FEAT: background swap cost by parked window, purge scale and floor/cap by @stefanodangelo in #208
- fix(auto-dry): release a booked cycle the device is no longer running by @decay71 in #212
- FEAT: print queue - stage a prepared file and launch it later with a loadout re-check by @stefanodangelo in #211
- feat(unload): [ace] unload_cut_macro for a toolhead filament cutter by @decay71 in #213
- fix(web): close the favorites card, the tabs after it render again by @decay71 in #214
- feat(unload): unload_cut_heads, a cutter on some heads only by @decay71 in #216
- FEAT: slicer preview thumbnails in preflight, History, Favorites and Queue by @stefanodangelo in #215
- test(web): refreeze the web goldens for the purge_* status fields by @decay71 in #217
- feat(history): show the estimate next to the real duration by @stefanodangelo in #219
- feat: 3D g-code preview in the preflight dialog by @stefanodangelo in #218
- feat(config): review the changes before a config save by @stefanodangelo in #220
- fix(history): record only the heads that printed by @stefanodangelo in #223
- feat(config): remember last filament (opt-in) by @stefanodangelo in #226
- multiACE+ 1.50-pre by @decay71 in #228
- feat(queue): estimate, loadout, Preview and Reassign on queued prints by @stefanodangelo in #229
- feat(web): push and browser notifications for errors and warnings by @stefanodangelo in #231
- feat(bg-wait): hold arrival head until LD_GRIP to eliminate front-bed taxi by @docx-tech in #233
- perf(bg-swap): shorter background swaps by @stefanodangelo in #224
- chore(bg-swap): log prime chunk timing against the MCU clock by @stefanodangelo in #238
- feat(bg-swap): add prime_scale config option to scale docked purge independently by @docx-tech in #234
- feat(bg-wait): hold arrival head until LD_PRIME to eliminate front-bed taxi by @docx-tech in #235
- Sync from development: ace2k driver, purge control, load and unload f… by @decay71 in #245
- feat(estimate): calibrate swap cost from real swap times, remove double counts by @stefanodangelo in #246
- multiACE+ 1.90 by @decay71 in #248
- test(managed): package test follows the shipped config by @decay71 in #249
New Contributors
- @docx-tech made their first contribution in #174
- @stefanodangelo made their first contribution in #179
- @physicsG made their first contribution in #168
Full Changelog: v1.27b...v1.90